Star wheel / transfer wheel timing fault
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 0 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
Wear, misalignment or play in the star wheel and its driving/passive wheel assemblies disrupts the precise timing needed to transfer containers between the filler carousel and adjacent conveying equipment. This causes containers to jam, tip, or fail to engage the pockets correctly, forcing the mechanism to stop or bind.
Was man dagegen tut
Perform periodic inspection and replacement of worn bushings, bearings and pocket guides, verify and adjust the mechanical timing/synchronization between the driving and passive wheels, and ensure correct lubrication and alignment of the star wheel assembly relative to the carousel and conveyor.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,4 % [0,1–1,1 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,6 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [45–66 %]
- Studien / Einheiten
- 120 / 162
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,4 % [0,0–1,7 %]18 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,4 % [0,0–1,3 %]44 Studien
- Bier, Wein und Spirituosen0,4 % [0,0–1,5 %]16 Studien
- Backwaren und Teigwaren0,5 % [0,0–1,9 %]0 Studien
- Fleisch, Geflügel und Fisch0,5 % [0,0–1,8 %]6 Studien
- Obst- und Gemüseverarbeitung0,5 % [0,0–1,8 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,5 % [0,0–1,9 %]6 Studien
- Zucker und Süßwaren0,5 % [0,0–1,9 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,4 % [0,0–1,7 %]6 Studien
- Futtermittel und Heimtiernahrung0,5 % [0,0–1,8 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,4 % [0,0–1,7 %]13 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseWear, misalignment or play in the star wheel and its driving/passive wheel assemblies disrupts the precise timing needed to transfer containers between the filler carousel and adjacent conveying equipment. This causes containers to jam, tip, or fail to engage the pockets correctly, forcing the mechanism to stop or bind.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES logs show recurrent short unplanned stops tagged to the starwheel or transfer wheel assets, encoder or position-sensor deviation alarms, and jam/photo-eye trip counts clustered at the filler infeed or outfeed. Neighbouring upstream/downstream machine states frequently show starvation or blocking correlated with these stop events.
Gegenmaßnahme
Ingenieurpraktische HinweisePerform periodic inspection and replacement of worn bushings, bearings and pocket guides, verify and adjust the mechanical timing/synchronization between the driving and passive wheels, and ensure correct lubrication and alignment of the star wheel assembly relative to the carousel and conveyor.
4Quellen
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenVerlustzeit: 3,00 min · laut Bericht: “Carousel star wheel timing disturb”
Wörtliches Zitat anzeigen
Carousel star wheel timing disturb 0 3 0 0 0 0 3 0.20
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenAnteil an der Verlustzeit: 0,200 % · laut Bericht: “Carousel star wheel timing disturb”
Wörtliches Zitat anzeigen
Carousel star wheel timing disturb 0 3 0 0 0 0 3 0.20
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Quelle öffnenZeit zwischen Ereignissen: 68.131 not reported · laut Bericht: “Driving Wheel”
Wörtliches Zitat anzeigen
Waktu Kerusakan Weibull MTTF 68130,63
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Quelle öffnenZeit zwischen Ereignissen: 23,7 not reported · laut Bericht: “Passive Wheel”
Wörtliches Zitat anzeigen
Waktu Kerusakan Weibull MTTF 23,684
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Quelle öffnenMittlere Ereignisdauer: 179 not reported · laut Bericht: “Passive Wheel”
Wörtliches Zitat anzeigen
Waktu Perbaikan Weibull MTTR 179
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Quelle öffnenZeit zwischen Ereignissen: 41.460 not reported · laut Bericht: “Star Wheel”
Wörtliches Zitat anzeigen
Waktu Kerusakan Weibull MTTF 41460
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Quelle öffnenMittlere Ereignisdauer: 209 not reported · laut Bericht: “Star Wheel”
Wörtliches Zitat anzeigen
Waktu Perbaikan Lognormal MTTR 209
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Quelle öffnenMittlere Ereignisdauer: 327 not reported · laut Bericht: “Driving Wheel”
Wörtliches Zitat anzeigen
Waktu Perbaikan Weibull MTTR 327,2321

