foratvise
Loslegen
Rüsten und Einstellen

Waiting for supervisor confirmation/authorization

Rüsten und EinstellenVerfügbarkeitGesamte Linie oder nicht spezifizierte Anlage

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 1 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

During a changeover or setup step the operator must obtain explicit approval from a supervisor or quality responsible before the line can resume or proceed to the next step, and production remains paused while this organizational authorization is sought and granted. The delay is not caused by a technical fault but by the need for a human sign-off embedded in the changeover procedure.

Was man dagegen tut

Define clear escalation and response-time rules for supervisor sign-offs, use remote or mobile approval tools so confirmation can be given without the supervisor being physically present, and delegate low-risk confirmations to trained operators to reduce dependence on a single authorizing role.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,5 % [0,1–1,4 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,8 %]
Anteil an der Verlustzeit bei Auftreten
56 % [44–67 %]
Studien / Einheiten
127 / 161
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,6 % [0,1–2,1 %]13 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,5 % [0,1–1,7 %]26 Studien
  • Bier, Wein und Spirituosen
    0,6 % [0,1–2,0 %]11 Studien
  • Backwaren und Teigwaren
    0,5 % [0,1–1,9 %]24 Studien
  • Fleisch, Geflügel und Fisch
    0,6 % [0,1–2,1 %]9 Studien
  • Obst- und Gemüseverarbeitung
    0,6 % [0,1–2,2 %]7 Studien
  • Getreide- und Ölsaatenmüllerei
    0,6 % [0,1–2,1 %]6 Studien
  • Zucker und Süßwaren
    0,6 % [0,1–2,0 %]9 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,6 % [0,1–1,9 %]5 Studien
  • Futtermittel und Heimtiernahrung
    0,8 % [0,1–3,0 %]7 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,6 % [0,1–2,2 %]10 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

During a changeover or setup step the operator must obtain explicit approval from a supervisor or quality responsible before the line can resume or proceed to the next step, and production remains paused while this organizational authorization is sought and granted. The delay is not caused by a technical fault but by the need for a human sign-off embedded in the changeover procedure.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

MES/SCADA shows the line or station in a held or paused state within a changeover event, with no fault alarm active, and the stop ends only when a confirmation or release event is logged, often tied to an operator or supervisor login action. The waiting interval appears as idle time nested inside the changeover duration rather than as a discrete machine fault code.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Define clear escalation and response-time rules for supervisor sign-offs, use remote or mobile approval tools so confirmation can be given without the supervisor being physically present, and delegate low-risk confirmations to trained operators to reduce dependence on a single authorizing role.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Mittlere Ereignisdauer: 3,00 min · laut Bericht: “Wait for supervisor confirmation”
    Wörtliches Zitat anzeigen
    Wait for supervisor confirmation 3.00 Internal Eliminated
  2. Verlustzeit: 3,00 min · laut Bericht: “Wait for supervisor confirmation”
    Wörtliches Zitat anzeigen
    Wait for supervisor confirmation 3.00