Discontinuous upstream feeding (hopper/conveyor bottleneck)
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 54 % der Verlustzeit der Linie. Berichtet von 0 der 43 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The feed hopper and conveyor belt supplying the crusher do not deliver a steady, matched flow of material, so the crusher repeatedly runs starved or receives surges that it cannot process smoothly. This mismatch between upstream feed capacity and crusher throughput creates frequent short interruptions as the machine waits for material or clears uneven loads.
Was man dagegen tut
Add or resize a surge/buffer hopper upstream with level-based automatic control of the feeder and conveyor speed so that material supply matches crusher capacity continuously. Install belt or hopper level sensors interlocked with feeder speed control and schedule upstream logistics to avoid supply gaps.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,5 % [0,1–1,6 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,0–0,9 %]
- Anteil an der Verlustzeit bei Auftreten
- 54 % [42–66 %]
- Studien / Einheiten
- 43 / 48
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,0–2,5 %]5 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,6 % [0,0–2,6 %]1 Studie
- Bier, Wein und Spirituosen0,6 % [0,0–2,5 %]0 Studien
- Backwaren und Teigwaren0,6 % [0,0–2,6 %]0 Studien
- Fleisch, Geflügel und Fisch0,6 % [0,0–2,4 %]0 Studien
- Obst- und Gemüseverarbeitung0,6 % [0,0–2,4 %]2 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,0–2,4 %]7 Studien
- Zucker und Süßwaren0,6 % [0,0–2,4 %]10 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,0–2,2 %]5 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,0–2,2 %]6 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,6 % [0,0–2,4 %]7 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe feed hopper and conveyor belt supplying the crusher do not deliver a steady, matched flow of material, so the crusher repeatedly runs starved or receives surges that it cannot process smoothly. This mismatch between upstream feed capacity and crusher throughput creates frequent short interruptions as the machine waits for material or clears uneven loads.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA shows the crusher run state cycling between running and idle in short bursts without any fault alarm, correlated with low or fluctuating hopper level readings and variable conveyor belt current/speed. Motor load on the crusher drops toward no-load values during starvation periods, and the pattern repeats intermittently rather than as a single sustained stop.
Gegenmaßnahme
Ingenieurpraktische HinweiseAdd or resize a surge/buffer hopper upstream with level-based automatic control of the feeder and conveyor speed so that material supply matches crusher capacity continuously. Install belt or hopper level sensors interlocked with feeder speed control and schedule upstream logistics to avoid supply gaps.
4Quellen
- Towards energy efficient scheduling in the olive oil extraction industry: Comparative assessment of energy consumption in two management models (2022)Quelle öffnenVerlustzeit: 193 min · laut Bericht: “discontinuous plant feeding / bottleneck of hopper and conveyor belt”
Wörtliches Zitat anzeigen
The time lost (193 min) was due to discontinuous plant feeding as batches of olive crop arrived in the mill, and then following the washing step, the bottleneck of a sole hopper and conveyor belt leading to the crushing machines.

