Vent tube bent or loose
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The vent tube on a filling valve, which controls liquid level by allowing displaced air or product overflow to escape, becomes bent out of its correct position or works loose from its mounting due to mechanical shock, vibration, or wear of the clamping fixture. This misalignment or play prevents the tube from seating correctly in the container neck, disrupting the fill cycle and the level or vacuum reference it provides.
Was man dagegen tut
Inspect and straighten or replace bent vent tubes, and tighten or redesign the mounting clamp to prevent loosening under vibration; include vent tube alignment and tightness in routine preventive maintenance checks on filling valves.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,6 % [0,1–1,5 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–0,9 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [46–67 %]
- Studien / Einheiten
- 120 / 162
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,1–2,3 %]18 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,7 % [0,1–2,3 %]44 Studien
- Bier, Wein und Spirituosen0,6 % [0,1–2,0 %]16 Studien
- Backwaren und Teigwaren0,7 % [0,1–2,5 %]0 Studien
- Fleisch, Geflügel und Fisch0,6 % [0,1–2,4 %]6 Studien
- Obst- und Gemüseverarbeitung0,7 % [0,1–2,4 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,1–2,3 %]6 Studien
- Zucker und Süßwaren0,7 % [0,1–2,6 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,1–2,5 %]6 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,1–2,3 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,6 % [0,1–2,4 %]13 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe vent tube on a filling valve, which controls liquid level by allowing displaced air or product overflow to escape, becomes bent out of its correct position or works loose from its mounting due to mechanical shock, vibration, or wear of the clamping fixture. This misalignment or play prevents the tube from seating correctly in the container neck, disrupting the fill cycle and the level or vacuum reference it provides.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseRepeated short stops or fault alarms on individual filling valves/heads, often correlated with a specific valve position across cycles, with maintenance log entries for tube straightening or replacement. Fill-level or pressure sensor readings on the affected head show erratic or out-of-tolerance values just before the stoppage.
Gegenmaßnahme
Ingenieurpraktische HinweiseInspect and straighten or replace bent vent tubes, and tighten or redesign the mounting clamp to prevent loosening under vibration; include vent tube alignment and tightness in routine preventive maintenance checks on filling valves.
4Quellen
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenVerlustzeit: 35,0 min · laut Bericht: “Vent tube bent correction/change”
Wörtliches Zitat anzeigen
Vent tube bent correction/change 0 2 0 0 10 23 35 2.39
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenAnteil an der Verlustzeit: 2,39 % · laut Bericht: “Vent tube bent correction/change”
Wörtliches Zitat anzeigen
Vent tube bent correction/change 0 2 0 0 10 23 35 2.39
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Quelle öffnenVerlustzeit: 2,00 min · laut Bericht: “Vent tube bent correction/change”
Wörtliches Zitat anzeigen
19 | Vent tube bent correction/change | 0 | 2 | 0 | 0 | 10 | 23 | 35 | 2.39
- A SEMINAR PAPER ON “OVERALL EQUIPMENT EFFECTIVENESS: A CASE STUDY AT A BOTTLING PLANT” (2023)Quelle öffnenAnzahl der Ereignisse: 16,0 events · laut Bericht: “Looses vent tube”
Wörtliches Zitat anzeigen
2 Looses vent tube 16 37 61%

