Ingredient weighing station fault or delay
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 58 % der Verlustzeit der Linie. Berichtet von 3 der 127 Studien, die sie beobachten konnten (begrenzte Evidenz).
Was passiert
The weighing station used to dose raw materials, premixes or microingredients (such as lysine) stops producing valid output because the scale, load cell, feeder or control interface malfunctions, or because operators must stop the process to search for and bring the correct material to the weighing point. Both failure modes interrupt the sequential dosing step that feeds the mixing or batching stage downstream.
Was man dagegen tut
Implement preventive calibration and maintenance of scales, load cells and feeders, and use automated diagnostics to flag drift or sensor faults before they cause stoppages. Organize material staging with kanban or pre-positioned bins near the weighing point and barcode or RFID verification to eliminate search and retrieval time.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,8 % [0,2–2,0 %]
- Erwarteter Anteil an der Verlustzeit
- 0,4 % [0,1–1,1 %]
- Anteil an der Verlustzeit bei Auftreten
- 58 % [47–68 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- C
Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,9 % [0,1–3,1 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,8 % [0,1–2,5 %]26 Studien
- Bier, Wein und Spirituosen0,9 % [0,1–3,1 %]11 Studien
- Backwaren und Teigwaren1,1 % [0,2–3,7 %]24 Studien
- Fleisch, Geflügel und Fisch0,9 % [0,1–3,2 %]9 Studien
- Obst- und Gemüseverarbeitung0,9 % [0,1–3,4 %]7 Studien
- Getreide- und Ölsaatenmüllerei0,9 % [0,1–3,2 %]6 Studien
- Zucker und Süßwaren0,9 % [0,1–3,0 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,9 % [0,1–3,1 %]5 Studien
- Futtermittel und Heimtiernahrung1,3 % [0,2–4,3 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,9 % [0,1–3,1 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe weighing station used to dose raw materials, premixes or microingredients (such as lysine) stops producing valid output because the scale, load cell, feeder or control interface malfunctions, or because operators must stop the process to search for and bring the correct material to the weighing point. Both failure modes interrupt the sequential dosing step that feeds the mixing or batching stage downstream.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseMES/SCADA shows the weighing station in fault or idle state with no stable weight reading or dosing confirmation, batch sequence held at the weighing step, and operator acknowledgement events tied to scale alarms or manual material-retrieval entries. Downstream mixing or blending equipment shows starvation (waiting-for-material) states correlated with these stoppages.
Gegenmaßnahme
Ingenieurpraktische HinweiseImplement preventive calibration and maintenance of scales, load cells and feeders, and use automated diagnostics to flag drift or sensor faults before they cause stoppages. Organize material staging with kanban or pre-positioned bins near the weighing point and barcode or RFID verification to eliminate search and retrieval time.
4Quellen
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,837 Kg.h-1 · laut Bericht: “Weighing (microingredients)”
Wörtliches Zitat anzeigen
6Weighing 32.50 0.026 ± 0.009 0.837 ± 0.293 Kg 10.45
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,161 Kg.h-1 · laut Bericht: “Weighing (lysine)”
Wörtliches Zitat anzeigen
7Weighing 10.20 0.016 ± 0.004 0.161 ± 0.041 Kg 2,01
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,194 Kg.h-1 · laut Bericht: “Weighing (premixes)”
Wörtliches Zitat anzeigen
8Weighing 20.30 0.010 ± 0.002 0.194 ± 0.041 Kg 2.42
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Quelle öffnenMittlere Ereignisdauer: 23,5 min · laut Bericht: “Weighing”
Wörtliches Zitat anzeigen
Weighing 23.49 21.62 8%
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Quelle öffnenMittlere Ereignisdauer: 21,6 min · laut Bericht: “Weighing”
Wörtliches Zitat anzeigen
Weighing 23.49 21.62 8%
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Quelle öffnenVerlustzeit: 23,5 min · laut Bericht: “Weighing (search and material location time)”
Wörtliches Zitat anzeigen
Weighing | 23.49

