foratvise
Loslegen
Thermische Behandlung

Sterilisieren (Autoklav, UHT)

In-container sterilisation of a conduction-heating low-acid canned food (batch steam retort)

Validiertes ModellOEE-Grenze 0,887 [0,781–0,915]20.000 Monte-Carlo-Stichproben · Seed 20261115 · berechnet am 16. November 2026

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sterilisieren (Autoklav, UHT) kann höchstens 89 von je 100 geplanten Stunden nutzen. Der Rest entfällt auf Grenzen, die kein Werk vermeiden kann.

  1. 89höchstens nutzbar
  2. 11sind physikalische Grenze

Die drei Grenzen, die das festlegen

Laufzeit: bis 96 %

Der Rest sind Stillstände, die Physik oder Vorschrift erzwingen: Reinigung, Umrüsten, Abtauen.

Geschwindigkeit: bis 93 %

Wie nah an ihrer Höchstgeschwindigkeit sie laufen kann, ohne Produkt oder Anlage zu schädigen.

Gutprodukt: bis 100 %

Ein Teil des Produkts liegt auch bei gut beherrschtem Prozess außerhalb der Spezifikation.

Das technische Detail ansehen

Technisches Detail

Unsicherheitsintervalle, physikalische Modelle je Station und Quellen, für alle, die jede Zahl prüfen möchten.

1Szenario

Solid-pack fish (tuna-style) in 84 × 46.5 mm cans is sterilised in a batch retort with saturated steam at 121.1 °C. The retort is loaded, vented to remove air, held at processing temperature until the slowest-heating point of every can (its geometric centre, since the pack heats by conduction) has received the required lethality, and cooled with water until the centre falls to the unloading temperature. The variant of continuous ultra-high-temperature (UHT) treatment of pumpable products followed by aseptic filling uses the same kinetics with a thin-film heating step instead of conduction into a can; it is described in the derivation but not computed here.

Herkunft der EingangsgrößenDeklarierte Annahme14Verifiziertes Zitat25

2Ergebnisse

Punktwert aus den Nominalparametern und 95-%-Intervall aus 20.000 Monte-Carlo-Ziehungen der unsicheren Parameter.
  • TheoretischThermodynamic minimum heat (product returns to ambient)0 kJ/kg
  • Sensible heat of product and container without heat recovery313 [239–368] kJ/kg
  • Beste verfügbare TechnikState-of-the-art on-site energy of retort sterilisation (canned vegetables, DOE)319 kJ/kg
  • TypischCurrent typical on-site energy of retort sterilisation (canned vegetables, DOE)505 kJ/kg
  • Required lethality at the cold spot (12-D botulinum cook or legal F0, whichever is larger)3,00 min
  • Thermal diffusivity of the product at the mean process temperature0,176 [0,131–0,175] mm²/s
  • Heating rate index f_h of the cold spot (first-term asymptote)27,8 [28,0–37,3] min
  • Heating lag factor j of the geometric centre (first-term asymptote)2,04
  • TheoretischMinimum heating time at retort temperature for the required lethality40,5 [38,5–52,5] min
  • Heating time with the capability margin on lethality47,5 [45,8–69,8] min
  • Heating time for the commercial target F0 of the documented product (model check)53,0 [51,0–66,8] min
  • Best dokumentiertDocumented process time at 121.1 °C for the commercial target50,0 min
  • Minimum cooling time until the centre reaches the unloading temperature27,8 [26,3–46,0] min
  • Minimum retort cycle (venting, heating, cooling, loading and unloading)92,3 [87,6–124,8] min
  • Cooling time after the capable (design) heating time28,0 [26,5–46,5] min
  • Retort cycle of the capable process (design heating time, cooling, venting, loading and unloading)99,5 [96,6–139,6] min
  • TheoretischMaximum cans per hour per cubic metre of retort (densest packing, heating and cooling only)3.094 [2.217–3.175] 1/h/m³
  • Standard deviation of ln F0 across the load0,250 [0,187–0,513]
  • Design lethality over required lethality at the nominal cold spot2,12 [1,72–5,06]
  • Share of containers below the required lethality0,00135 [0,00025–0,00578]
  • TheoretischMaximum yield (hermetic container: no mass leaves)1,00
  • TheoretischMaximum OEE quality factor0,9987 [0,9942–0,9997]
  • TheoretischMaximum availability (periodic cleaning; batch transfer steps belong to the ideal cycle)0,958 [0,918–0,978]
  • TheoretischMaximum performance factor: ideal batch cycle over the cycle of the capable process (lethality margin)0,927 [0,833–0,953]
  • TheoretischPhysics-bounded OEE0,887 [0,781–0,915]

3Obergrenzen je Dimension

Jede Dimension zeigt die vom Modell berechneten Obergrenzen und, bei vergleichbaren Einheiten, dokumentierte Vergleichswerte. Farbe und Markerform kennzeichnen den Grenztyp im gesamten Orakel.
  • Theoretisch
  • Beste verfügbare Technik
  • Best dokumentiert
  • Typisch
Energie je ProdukteinheitkJ/kg · niedriger ist besser
  • TheoretischThermodynamic minimum heat (product returns to ambient)0 kJ/kg
  • TheoretischDOE bandwidth study, thermodynamic minimum energy intensity of canned fruits and vegetables · Vergleichswert0 kJ/kg
  • Beste verfügbare TechnikDOE bandwidth study, state of the art of retort sterilisation, canned fruits and vegetables · Vergleichswert319 kJ/kg
  • Beste verfügbare TechnikState-of-the-art on-site energy of retort sterilisation (canned vegetables, DOE)319 kJ/kg
  • TypischDOE bandwidth study, current typical retort sterilisation, canned fruits and vegetables · Vergleichswert505 kJ/kg
  • TypischCurrent typical on-site energy of retort sterilisation (canned vegetables, DOE)505 kJ/kg
Zyklus- oder Verweilzeitmin · niedriger ist besser
  • TheoretischMinimum heating time at retort temperature for the required lethality40,5 [38,5–52,5] min
  • Best dokumentiertDocumented process time at 121.1 °C for the commercial target50,0 min
  • Best dokumentiertDocumented process for solid-pack tuna in 84 × 46.5 mm cans: 50 min at 121.1 °C for F0 = 10 min (timed from the moment the retort reaches temperature) · Vergleichswert50,0 min
Durchsatz1/h/m³ · höher ist besser
  • TheoretischMaximum cans per hour per cubic metre of retort (densest packing, heating and cooling only)3.094 [2.217–3.175] 1/h/m³
Ausbeutehöher ist besser
  • TheoretischMaximum yield (hermetic container: no mass leaves)1,00
Qualitäthöher ist besser
  • TheoretischMaximum OEE quality factor0,9987 [0,9942–0,9997]
Verfügbarkeithöher ist besser
  • TheoretischMaximum availability (periodic cleaning; batch transfer steps belong to the ideal cycle)0,958 [0,918–0,978]
Leistunghöher ist besser
  • TheoretischMaximum performance factor: ideal batch cycle over the cycle of the capable process (lethality margin)0,927 [0,833–0,953]
OEEhöher ist besser
  • TheoretischPhysics-bounded OEE0,887 [0,781–0,915]

4Verlustkaskade

Was jede Obergrenze von der nächsten trennt, von der physikalischen Grenze bis zum typischen Betrieb.
  1. TheoretischBeste verfügbare TechnikEnergie je Produkteinheit
    0 kJ/kg → 319 kJ/kg (Abstand 319 kJ/kg)

    The thermodynamic minimum is zero because the product leaves at roughly the temperature it entered: every joule used to heat it could in principle be recovered while cooling it, exactly as in regenerative pasteurisation. A batch retort cannot regenerate between the hot load and the next cold load without storage, so it supplies at least the sensible heat of product and can, plus the heat of the retort shell, the water used for venting and the condensate; the state-of-the-art value already assumes heat recovery and efficient venting.

  2. Beste verfügbare TechnikTypischEnergie je Produkteinheit
    319 kJ/kg → 505 kJ/kg (Abstand 186 kJ/kg)

    Typical retorts vent with live steam to atmosphere, heat the vessel and the water of water-immersion systems at every cycle, lose heat through uninsulated shells and discard the cooling water without recovering its heat.

  3. TheoretischBest dokumentiertZyklus- oder Verweilzeit
    40,5 [38,5–52,5] min → 50,0 min (Abstand 9,50 min)

    The theoretical heating time delivers exactly the required botulinum lethality (F0 = 3 min) at the centre of a nominal can whose wall is stepped instantly to retort temperature. The documented process targets F0 = 10 min to control heat-resistant spoilage spores beyond the safety minimum, adds a margin for can-to-can variation of fill, initial temperature and retort temperature distribution, and is timed after a come-up period; conduction into the solid pack (heating rate index of tens of minutes) dominates all of them.

  4. TheoretischTypischLeistung

    Under the common batch convention these steps belong to the ideal cycle and act through performance. A batch retort spends part of every cycle closed but not processing (venting, come-up) or open (loading, unloading); continuous rotary or hydrostatic sterilisers remove most of the handling time but keep the venting and come-up physics.

5Physikalisch begrenzte OEE

Die höchste OEE, die die Operation erreichen kann: Verfügbarkeit, Leistung und Qualität, begrenzt nur durch unvermeidbare Stillstände und physikalische Prozessfähigkeit.
Anteil der Belegungszeit, der nach jedem unvermeidbaren Verlust verbleibt. Die Achse beginnt bei 0,75.
  • Belegungszeit (ideal)
    1,000
  • Verfügbarkeit
    Faktor 0,958 [0,918–0,978]
    0,958 (−0,042)
  • Leistung
    Faktor 0,927 [0,833–0,953]
    0,889 (−0,070)
  • Qualität
    Faktor 0,9987 [0,9942–0,9997]
    0,887 (−0,001)
  • Physikalisch begrenzte OEE
    0,887 [0,781–0,915]

6Vollständige Herleitung

Massen- und Energiebilanzen, geschwindigkeitsbestimmender Schritt, Prozessfähigkeit und unvermeidbare Stillstände, mit Erläuterung jedes Terms.

Scope. Solid-pack fish (tuna style) in 84 × 46.5 mm cans, sterilised in a batch retort with saturated steam at 121.1 °C and cooled with water. The pack heats by conduction, so the slowest-heating point of each can is its geometric centre. Symbols, values, units, uncertainty distributions and sources are listed in the parameter table generated from config/physics/sterilization.yaml.

1. Mass balance — maximum yield

The container is hermetically sealed before heating: no product can leave it, and no water evaporates from the food. The mass balance of the operation is therefore mout=minm_{out} = m_{in} and the physical yield ceiling is exactly Ymax=1Y_{max} = 1. Cans that leak, seams that fail inspection, dented or buckled cans and cans that peak because they were cooled without overpressure are losses of the installed technology (seaming, handling, pressure control), not of physics; they belong to the gap between this ceiling and the documented operation.

2. Energy balance — minimum energy per unit of product

The product enters the retort at T0T_0, is heated to the retort temperature TRT_R and leaves at roughly the temperature at which it entered. Its net enthalpy change is close to zero.

Thermodynamic minimum. As in regenerative pasteurisation, all the heat given to the product while heating could in principle be taken back from it while cooling and given to the next load: the reversible minimum is zero. This agrees with the thermodynamic minimum of 0 that the US DOE bandwidth study assigns to canned fruits and vegetables, which involve no significant chemical change.

Minimum without heat recovery. A batch retort does not regenerate between a hot load and the next cold load. If no heat is recovered, the heat supplied per kilogram of product is at least the sensible heat of the product and its container:

qsens=(cp+r cp,c) (TR−T0),q_{sens} = \big(c_p + r\,c_{p,c}\big)\,(T_R - T_0),

where cpc_p is the specific heat of the product, rr the mass of container per unit mass of product and cp,cc_{p,c} the specific heat of the tinplate. The heat of the retort shell, the steam blown off during venting, the water of water-immersion retorts and the losses through the shell come on top.

The energy ceilings. Theoretical: 0. Best available technique: the DOE state-of-the-art on-site energy intensity of retort sterilisation of canned fruits and vegetables (137 Btu/lb), which is of the same size as qsensq_{sens} and so already implies efficient venting and some heat recovery. Typical: the DOE current typical value (217 Btu/lb). The DOE practical minimum (92 Btu/lb, technologies under development) and the electricity plus heat of complete fish canning lines in the BAT reference document (150–190 kWh per tonne of fish, which include precooking and auxiliaries) are listed as benchmarks.

UHT variant. In continuous ultra-high-temperature treatment of pumpable products followed by aseptic filling, the product flows through heat exchangers and can be regenerated like a pasteuriser; the energy balance then approaches the zero minimum asymptotically as the regeneration effectiveness tends to one, and the rate limit becomes the holding time at a high temperature rather than conduction into a container. The same kinetics (section 3) apply.

3. Rate-limiting step — minimum process time and maximum throughput

Kinetics. Bacterial spores die by a first-order process at constant temperature, dN/dt=−kNdN/dt = -kN, so log⁡10(N0/N)=t/D\log_{10}(N_0/N) = t/D with the decimal reduction time D=ln⁡10/kD = \ln 10 / k: the time that kills 90 % of the population. Over the range of sterilisation temperatures DD falls tenfold for every zz kelvin of temperature rise,

D(T)=Dref 10(Tref−T)/z.D(T) = D_{ref}\,10^{(T_{ref} - T)/z}.

One minute at temperature TT therefore has the same effect as L(T)=10(T−Tref)/zL(T) = 10^{(T - T_{ref})/z} minutes at the reference temperature TrefT_{ref} = 121.1 °C; LL is the lethal rate. With zz = 10 °C, one minute at 111.1 °C is worth 0.1 min at 121.1 °C and one minute at 101.1 °C only 0.01 min. The lethality delivered at a point is

F0=∫0∞10(T(t)−121.1 ∘C)/z dt.F_0 = \int_0^{\infty} 10^{(T(t) - 121.1\,^{\circ}\mathrm{C})/z}\,dt .

Required lethality. The minimum safety requirement for low-acid canned food is the destruction of Clostridium botulinum spores; the accepted process reduces their number by twelve decades (the "12-D" or botulinum cook): F12D=12×D121.1=12×0.23=2.76F_{12D} = 12 \times D_{121.1} = 12 \times 0.23 = 2.76 min. An EU legal text states the treatment of meat products in hermetically sealed containers as "a Fo value of three or more". The model uses Freq=max⁡(nD121.1, F0,legal)F_{req} = \max(n D_{121.1},\, F_{0,legal}) = 3 min at the cold spot.

Heat penetration. The pack is a finite cylinder of radius RR and half-height ℓ\ell with thermal diffusivity α=k/(ρcp)\alpha = k/(\rho c_p), where kk is the thermal conductivity, ρ\rho the density and cpc_p the specific heat of the product. If the can wall is brought to the retort temperature TRT_R at t=0t = 0, the exact solution of the heat equation at the geometric centre is the product of the solutions for an infinite cylinder and an infinite slab:

TR−Tc(t)TR−T0=∑n≥12βnJ1(βn) e−βn2αt/R2⏟radial  ×  ∑m≥04(−1)m(2m+1)π e−λm2αt/ℓ2⏟axial,\frac{T_R - T_c(t)}{T_R - T_0} = \underbrace{\sum_{n\ge1} \frac{2}{\beta_n J_1(\beta_n)}\, e^{-\beta_n^2 \alpha t / R^2}}_{\text{radial}} \;\times\; \underbrace{\sum_{m\ge0} \frac{4(-1)^m}{(2m+1)\pi}\, e^{-\lambda_m^2 \alpha t/\ell^2}}_{\text{axial}},

where βn\beta_n are the roots of the Bessel function J0J_0, J1J_1 is the Bessel function of order one and λm=(2m+1)π/2\lambda_m = (2m+1)\pi/2. Thirty terms of each series are summed. Cooling is added by superposition: when steam is shut off at time BB and cooling water at TcwT_{cw} floods the retort, the wall temperature steps down by TR−TcwT_R - T_{cw}, and the centre temperature becomes the heating response minus (TR−Tcw)(T_R - T_{cw}) times the same step response delayed by BB. Because heat keeps flowing inwards for a while after the wall is cooled, the centre temperature continues to rise briefly and part of the lethality is delivered during cooling; the model includes it.

For long times only the first term of each series survives and the centre approaches the classical semi-logarithmic heating line of Ball's method,

TR−Tc=j (TR−T0) 10−t/fh,fh=ln⁡10α (β12/R2+π2/(4ℓ2)),j=2β1J1(β1)⋅4π=1.602×1.273=2.04,T_R - T_c = j\,(T_R - T_0)\,10^{-t/f_h}, \qquad f_h = \frac{\ln 10}{\alpha\,(\beta_1^2/R^2 + \pi^2/(4\ell^2))}, \qquad j = \frac{2}{\beta_1 J_1(\beta_1)} \cdot \frac{4}{\pi} = 1.602 \times 1.273 = 2.04,

where fhf_h is the heating rate index (the time for the temperature difference to fall tenfold) and jj the lag factor of the geometric centre. They are reported as outputs; the lethality itself is computed with the full series.

Product properties. The FAO gives the thermal conductivity of unfrozen white fish at 0 °C (0.37 to 0.5 kcal m⁻¹ h⁻¹ K⁻¹), its density (1 054 kg/m³) and specific heat (0.9 kcal kg⁻¹ K⁻¹). Fish is mostly water, and the conductivity of liquid water rises by about a fifth between 0 °C and the mean process temperature; the conductivity is therefore scaled by kw(Tˉ)/kw(0 ∘C)k_w(\bar T)/k_w(0\,^{\circ}\mathrm{C}) from IAPWS through CoolProp, with Tˉ=(T0+TR)/2\bar T = (T_0 + T_R)/2.

Minimum heating time. BminB_{min} is the smallest heating time (on a grid of 0.25 min) for which F0(B)≥FreqF_0(B) \ge F_{req} at the centre of a nominal can. It is a lower bound because the wall is assumed to reach the retort temperature instantly (no come-up ramp, no resistance of the condensing steam film). The output heat_time_commercial repeats the calculation for the commercial target of the documented product, F0F_0 = 10 min; it agrees with the FAO process of 50 min at 121.1 °C for solid-pack tuna in 84 × 46.5 mm cans to within a few minutes, the documented time being counted after a come-up period that already heats the cans.

Cooling time. tcoolt_{cool} is the time from steam-off until the centre, past its peak, falls to the unloading temperature TunT_{un}.

Maximum throughput. Equal parallel cylinders fill at most a fraction ϕ=π/(23)=0.907\phi = \pi/(2\sqrt 3) = 0.907 of space (hexagonal packing). A retort volume VrV_r holds ϕVr/Vcan\phi V_r / V_{can} cans, with Vcan=πd2H/4V_{can} = \pi d^2 H/4, and each load occupies it for Bmin+tcoolB_{min} + t_{cool}, so

N˙maxVr=ϕVcan (Bmin+tcool).\frac{\dot N_{max}}{V_r} = \frac{\phi}{V_{can}\,(B_{min} + t_{cool})}.

4. Process capability — quality ceiling

The lethality at the cold spot differs from can to can: the diffusivity varies with fill and composition (relative standard deviation σα/α\sigma_\alpha/\alpha), the initial temperature varies (σT0\sigma_{T_0}) and the heating medium is not perfectly uniform across the load (σTR\sigma_{T_R}). Since F0F_0 depends exponentially on temperature, ln⁡F0\ln F_0 is close to normally distributed. Its standard deviation is obtained by perturbing each source by one standard deviation at the minimum heating time:

s2=∑x∈{α, T0, TR}(ln⁡F0−ln⁡F0(x−σx))2.s^2 = \sum_{x\in\{\alpha,\,T_0,\,T_R\}} \big(\ln F_0 - \ln F_0(x - \sigma_x)\big)^2 .

The processor targets Fdesign=Freq ezsF_{design} = F_{req}\,e^{z s} at the nominal can, so that the share of under-processed containers is

d=Φ(−z),Qmax=1−d.d = \Phi(-z), \qquad Q_{max} = 1 - d.

The over-processing factor ezse^{zs} is the price in heating time and in product quality (texture, colour, nutrients) of that safety margin; the heating time that delivers it is heat_time_design.

5. Unavoidable stops — maximum availability

A batch retort is closed and pressurised while it processes. Between loads the baskets must be moved out and in (tlut_{lu}), and before the processing time may start, the air must be vented: air left in a steam retort forms cold pockets. The US regulation prescribes venting schedules; the shortest is a valve "wide open for at least 4 minutes and to at least 220 °F", other arrangements need 5 to 8 minutes. Under the common batch convention of all models, venting and loading/unloading are not availability losses: like heating and cooling, they are steps every batch needs, so they belong to the ideal batch cycle at their regulatory or declared minimum,

tcyc,min=Bmin+tcool+tv+tlu=92.25 min,t_{cyc,min} = B_{min} + t_{cool} + t_v + t_{lu} = 92.25\ \text{min},

and act through the performance factor (section 6). Availability counts only the periodic cleaning of the retort room equipment, of declared duration tclt_{cl} every tcyct_{cyc} (retorts and their cooling-water circuits are not cleaned in place as a closed product circuit, so the cleaning model does not apply):

Amax=1−tcltcyc=0.958.A_{max} = 1 - \frac{t_{cl}}{t_{cyc}} = 0.958 .

The come-up time beyond venting is not counted (the wall is stepped instantly), which makes the bound optimistic.

6. Physics-bounded OEE

Scope of the bound. The theoretical label of OEEmaxOEE_{max} means physics-bounded under the declared scenario: the ceiling follows from the physics of the operation for the declared product, equipment and schedule, and it is a bound only conditional on those declarations. It follows the common definition of all models: AmaxA_{max} counts only stops required by regulation or forced by a physical mechanism, at their physical minimum duration, plus the start-up they force; PmaxP_{max} is the ratio of the physics-limited ideal cycle to the cycle of the capable process; QmaxQ_{max} is the share of conforming units, and mass losses of conforming product are reported only as yield.

OEEmax=Amax×Pmax×Qmax,Pmax=Bmin+tcool+tv+tluBdesign+tcool,d+tv+tlu,Ymax=1.OEE_{max} = A_{max} \times P_{max} \times Q_{max}, \qquad P_{max} = \frac{B_{min} + t_{cool} + t_v + t_{lu}}{B_{design} + t_{cool,d} + t_v + t_{lu}}, \qquad Y_{max} = 1.

The reference is the ideal batch cycle of section 5, which delivers exactly the required lethality. The under-processed share of section 4, 1−Φ(−z)1 - \Phi(-z), holds only for loads heated for the design time BdesignB_{design} (tcool,dt_{cool,d} is the cooling time after it), so Pmax<1P_{max} < 1 is the price in time of making every container safe, as the capable seal dwell in the packaging model: 92.25/99.5 = 0.927 at the point values, and OEEmaxOEE_{max} = 0.887. The Monte Carlo intervals over the declared uncertainty of every input are reported in the output table.

7. Assumptions and validity

See the assumption and validity lists generated from the configuration file. The thermal properties of the product (conductivity, density, specific heat) are FAO values for white fish and can later be replaced by a composition-based property model. The most influential inputs (sensitivity table) are the conductivity and the initial temperature for the heating time, and the loading and venting times for the performance factor.

References

  • Food and Agriculture Organization of the United Nations. Planning and engineering data 2. Fish canning, FAO Fisheries Circular No. 784, 1988 (chapters 1 and 4).
  • Food and Agriculture Organization of the United Nations. Freezing and refrigerated storage in fisheries, FAO Fisheries Technical Paper 340, 1994 (chapter 19, properties of fish).
  • U.S. Code of Federal Regulations, Title 21, Part 113, Thermally Processed Low-Acid Foods Packaged in Hermetically Sealed Containers, 2025 edition.
  • Commission Delegated Regulation (EU) 2020/692, Annex XXVI.
  • European Commission, Joint Research Centre. Best Available Techniques (BAT) Reference Document for the Food, Drink and Milk Industries, 2019.
  • U.S. Department of Energy. Bandwidth Study on Energy Use and Potential Energy Saving Opportunities in U.S. Food and Beverage Manufacturing, 2017.
  • Bell, I. H., Wronski, J., Quoilin, S., Lemort, V. (2014). Pure and pseudo-pure fluid thermophysical property evaluation and the open-source thermophysical property library CoolProp. Industrial & Engineering Chemistry Research, 53, 2498–2508. doi:10.1021/ie4033999

7Parameter und Herkunft

Jede Eingangsgröße mit Wert, Einheit, Rolle, Unsicherheitsverteilung und Herkunft. Öffnen Sie ein Zitat, um die Quellenpassage zu lesen, die den Wert belegt.

8Vergleichswerte

Dokumentierte Werte aus offenen Quellen zur Prüfung der Obergrenzen; kein dokumentierter Wert darf die theoretische Grenze übertreffen.
VergleichswertObergrenzeWertHerkunft
DOE bandwidth study, thermodynamic minimum energy intensity of canned fruits and vegetables
Wörtliches Zitat anzeigen
Canned Fruits and Vegetables 0 17,658 0Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Food and Beverage Manufacturing (öffnet in neuem Tab). U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office, 2017. S. 26. DOE/EE-1571; OSTI ID 1512366
Theoretisch0 Btu/lbVerifiziertes Zitat
DOE bandwidth study, practical minimum (R&D technologies) of retort sterilisation, canned fruits and vegetables
Wörtliches Zitat anzeigen
Heat sterilization (retorting) 217 137 92 0Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Food and Beverage Manufacturing (öffnet in neuem Tab). U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office, 2017. S. 39. DOE/EE-1571; OSTI ID 1512366
—92 Btu/lbVerifiziertes Zitat
DOE bandwidth study, state of the art of retort sterilisation, canned fruits and vegetables
Wörtliches Zitat anzeigen
Heat sterilization (retorting) 217 137 92 0Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Food and Beverage Manufacturing (öffnet in neuem Tab). U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office, 2017. S. 39. DOE/EE-1571; OSTI ID 1512366
Beste verfügbare Technik137 Btu/lbVerifiziertes Zitat
DOE bandwidth study, current typical retort sterilisation, canned fruits and vegetables
Wörtliches Zitat anzeigen
Heat sterilization (retorting) 217 137 92 0Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Food and Beverage Manufacturing (öffnet in neuem Tab). U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office, 2017. S. 39. DOE/EE-1571; OSTI ID 1512366
Typisch217 Btu/lbVerifiziertes Zitat
Energy use of fish canning, whole canning line (lower end); includes precooking, filling and auxiliaries, so it bounds the retort from above
Wörtliches Zitat anzeigen
canning consumes 150–190 kWh/t of fishBest Available Techniques (BAT) Reference Document for the Food, Drink and Milk Industries (öffnet in neuem Tab). European Commission, Joint Research Centre; Publications Office of the European Union, 2019. S. 416. EUR 29978 EN; JRC118627; doi:10.2760/243911
Best dokumentiert150 kW·h/tonneVerifiziertes Zitat
Energy use of fish canning, whole canning line (upper end)
Wörtliches Zitat anzeigen
canning consumes 150–190 kWh/t of fishBest Available Techniques (BAT) Reference Document for the Food, Drink and Milk Industries (öffnet in neuem Tab). European Commission, Joint Research Centre; Publications Office of the European Union, 2019. S. 416. EUR 29978 EN; JRC118627; doi:10.2760/243911
Typisch190 kW·h/tonneVerifiziertes Zitat
Documented process for solid-pack tuna in 84 × 46.5 mm cans: 50 min at 121.1 °C for F0 = 10 min (timed from the moment the retort reaches temperature)
Wörtliches Zitat anzeigen
which can be achieved by processing for 74 min at 116 �C or 50 min at 121.1Planning and engineering data 2. Fish canning (FAO Fisheries Circular No. 784), chapter 1: Canning principles (öffnet in neuem Tab). Food and Agriculture Organization of the United Nations, 1988. FAO Fisheries Circular No. 784, FIIU/C784(En)
Best dokumentiert50 minVerifiziertes Zitat
Second heat treatment of sterilised milk in containers: autoclave or continuous retort at about 110–125 °C for 20 to 40 minutes (convection-heating liquid, upper end)
Wörtliches Zitat anzeigen
in an autoclave in batches or in a continuous retort at approximately 110–125 °C for 20 to 40 minutesBest Available Techniques (BAT) Reference Document for the Food, Drink and Milk Industries (öffnet in neuem Tab). European Commission, Joint Research Centre; Publications Office of the European Union, 2019. S. 338. EUR 29978 EN; JRC118627; doi:10.2760/243911
Typisch40 minVerifiziertes Zitat

9Unvermeidbare Stillstände

Stillstände, die Physik oder Regulierung erzwingen; sie bestimmen die maximale Verfügbarkeit.
  • Venting of the steam retort (regulatory minimum; part of the ideal batch cycle, acts through performance)Verifiziertes Zitat

    Air left in a steam retort forms cold pockets; the regulation prescribes minimum venting times and temperatures before the processing time may start.

    Wörtliches Zitat anzeigen
    Vent gate or plug cock valve should be wide open for at least 4 minutes and to at least 22021 CFR Part 113 — Thermally Processed Low-Acid Foods Packaged in Hermetically Sealed Containers (4-1-25 Edition) (öffnet in neuem Tab). U.S. Government Publishing Office (Code of Federal Regulations, Title 21, Chapter I), 2025. 21 CFR 113 (2025)
  • Loading and unloading of baskets (part of the ideal batch cycle, acts through performance)Deklarierte Annahme

    A batch retort is closed while it processes; baskets must be moved in and out between cycles.

  • CleaningDeklarierte Annahme

    Retort room equipment and cooling water circuits are cleaned periodically; interval and duration are declared assumptions.

10Annahmen

  1. Common batch convention: venting (regulatory minimum), loading and unloading (declared), heating and cooling belong to the ideal batch cycle and act through the performance factor, the ratio of the ideal cycle at the minimum heating time to the cycle of the capable process (design heating time). Availability counts only the periodic cleaning of the retort room equipment, at a declared duration: retorts and their cooling-water circuits are not cleaned in place as a closed product circuit, so the cleaning model does not apply.
  2. First-order inactivation with D and z constant over 100–125 °C; lethality is integrated at the geometric centre, which is the slowest-heating point of a conduction-heating can.
  3. Pure conduction with constant properties in a finite cylinder of the can's outer dimensions; the wall follows the medium temperature instantly (no come-up ramp, no surface resistance of condensing steam or water), so the computed heating time is a lower bound.
  4. Product conductivity is the FAO value for unfrozen white fish at 0 °C scaled by the ratio of the conductivity of liquid water at the mean process temperature to that at 0 °C; density and specific heat are the FAO values for white fish.
  5. Can-to-can variation of ln F0 combines independent variations of diffusivity, retort temperature and initial temperature; the processor targets the required lethality plus z standard deviations.
  6. Seam defects, leakers and damaged cans are technology losses, not physics: the yield ceiling of a hermetic container is 1.

11Gültigkeitsbereich

  • Low-acid foods (pH above 4.6) in rigid cans that heat by conduction (solid packs of fish or meat, purées); convection-heating packs heat several times faster and need a heat-penetration model with mixing.
  • Retort temperatures between about 110 °C and 125 °C.

12Sensitivität

Elastizität: relative Änderung der Ergebnisgröße bei relativer Änderung jedes Parameters. Daneben steht die Spearman-Rangkorrelation aus den Monte-Carlo-Ziehungen.
  • TrefT_{ref}Reference temperature of F0
    Elastizität -0,242Spearman-ρ —
  • TRT_RRetort (heating medium) temperature
    Elastizität +0,223Spearman-ρ —
  • σα/α\sigma_\alpha/\alphaCan-to-can relative standard deviation of the thermal diffusivity (fill, composition)
    Elastizität -0,076Spearman-ρ -0,80
  • zmz_mDesign margin on ln F0, in standard deviations
    Elastizität -0,062Spearman-ρ -0,24
  • tcyct_{cyc}Operating time between two cleanings of the retort room equipment
    Elastizität +0,044Spearman-ρ —
  • tclt_{cl}Duration of the cleaning
    Elastizität -0,043Spearman-ρ -0,47
  • TcwT_{cw}Cooling-water temperature
    Elastizität +0,033Spearman-ρ +0,07
  • ρ\rhoDensity of the product
    Elastizität -0,031Spearman-ρ —
  • cpc_pSpecific heat of the unfrozen product
    Elastizität -0,031Spearman-ρ —
  • k0k_0Thermal conductivity of unfrozen fish at 0 °C
    Elastizität +0,029Spearman-ρ +0,01
  • σTR\sigma_{T_R}Standard deviation of the heating-medium temperature across the load
    Elastizität -0,025Spearman-ρ -0,15
  • T0T_0Initial product temperature at the start of heating
    Elastizität +0,021Spearman-ρ +0,08
  • TunT_{un}Centre temperature at which cans are unloaded
    Elastizität -0,019Spearman-ρ -0,05
  • tlut_{lu}Loading and unloading time of the retort baskets per cycle
    Elastizität +0,016Spearman-ρ +0,13
  • zzTemperature change that alters the decimal reduction time tenfold
    Elastizität +0,014Spearman-ρ —
  • ddCan diameter
    Elastizität -0,012Spearman-ρ —
  • F0,legalF_{0,legal}Legal minimum lethality of a treatment in a hermetically sealed container
    Elastizität +0,006Spearman-ρ —
  • tvt_vMinimum venting time of a steam retort
    Elastizität +0,003Spearman-ρ +0,03
  • HHCan height
    Elastizität -0,001Spearman-ρ —
  • σT0\sigma_{T_0}Standard deviation of the initial product temperature
    Elastizität 0,000Spearman-ρ -0,05
  • Größe steigt mit dem Parameter
  • Größe sinkt mit dem Parameter

13Validierungsprüfungen

Ein Modell wird nur veröffentlicht, wenn alle Prüfungen bestanden sind.
  • Dimensionsanalyse25 outputs converted to their declared unitsBestanden
  • Jeder zitierte Wert an seiner Quelle verifiziert25 verified, 0 failedBestanden
  • Kein dokumentierter Wert übertrifft die theoretische GrenzeBestanden
  • Obergrenzen in physikalischer ReihenfolgeBestanden
  • Anteile zwischen 0 und 1Bestanden

14Verlustursachen in dieser Operation

Wahrscheinlichkeit, dass jede Ursache als relevanter Verlust einer Linie dokumentiert ist, gepoolt über alle Segmente.

15Literatur

  1. Planning and engineering data 2. Fish canning (FAO Fisheries Circular No. 784), chapter 1: Canning principles (öffnet in neuem Tab). Food and Agriculture Organization of the United Nations, 1988. FAO Fisheries Circular No. 784, FIIU/C784(En)
  2. fao_fc784_ch4_processing
  3. Freezing and refrigerated storage in fisheries (FAO Fisheries Technical Paper 340), chapter 19: Some related facts and figures (öffnet in neuem Tab). Food and Agriculture Organization of the United Nations, 1994. FAO Fisheries Technical Paper 340; ISBN 92-5-103579-2
  4. 21 CFR Part 113 — Thermally Processed Low-Acid Foods Packaged in Hermetically Sealed Containers (4-1-25 Edition) (öffnet in neuem Tab). U.S. Government Publishing Office (Code of Federal Regulations, Title 21, Chapter I), 2025. S. 8. 21 CFR 113 (2025)
  5. Commission Delegated Regulation (EU) 2020/692 of 30 January 2020 (rules for entry into the Union of consignments of certain animals, germinal products and products of animal origin) (öffnet in neuem Tab). Publications Office of the European Union, 2020. S. 138. CELEX 32020R0692; OJ L 174, 3.6.2020, p. 379
  6. Best Available Techniques (BAT) Reference Document for the Food, Drink and Milk Industries (öffnet in neuem Tab). European Commission, Joint Research Centre; Publications Office of the European Union, 2019. S. 416. EUR 29978 EN; JRC118627; doi:10.2760/243911
  7. Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Food and Beverage Manufacturing (öffnet in neuem Tab). U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office, 2017. S. 39. DOE/EE-1571; OSTI ID 1512366
  8. doi:10.1021/ie4033999 — Thermophysical property library (water conductivity).

Prozesse mit dieser Operation