foratvise
Loslegen
Eingeschlossene Studie

Applying Lean Manufacturing tools to minimize waste in a mass consumption food company

Quelle öffnen

1Bibliografische Angaben

Autoren
Lagos, Maricielo, Luis, Katsuhiro Nishizawa, Ramos, Edgar
Jahr
2022
Publikationsorgan
—
DOI
—
Land
Peru
Segment
Backwaren und Teigwaren
Prozessfamilie
Formen, Backen und Garen
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · — Maschinen
Beobachtungszeitraum
—
Datenerhebung
not_reported
Intervention
Umfeld laut Studie anzeigen
For the case study, a line is chosen where 4 types of crackers or salty cookies are produced, which we will call cookies type A, type B, type C and type D.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 10Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—
Wörtliches Zitat anzeigen (Stage IV: Analysis after improvement / Fig. 8)
In the graph, the material yield of the type D biscuit had an increase from 96.7 percent to 98.9 percent.
noneAusbeute98,9 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Stage IV: Analysis after improvement / Fig. 7)
The results indicate that the OEE of the type D cookie had an increase from 83.2 percent to 86.7 percent.
noneOEE86,7 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Stage IV: Analysis after improvement / Fig. 8)
In the graph, the material yield of the type D biscuit had an increase from 96.7 percent to 98.9 percent.
noneAusbeute96,7 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Stage IV: Analysis after improvement / Fig. 7)
The results indicate that the OEE of the type D cookie had an increase from 83.2 percent to 86.7 percent.
noneOEE83,2 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section IV.A Main Problem)
Likewise, according to the OEE, the internal target of 86.9% having an average of 84%.
noneOEE84,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Section IV.A Main Problem)
The material performance indicator reflects that the internal objective of 99% in production during 2021 was not achieved, having an average of 97% in the production of type D biscuits.
noneAusbeute97,0 %Einfache Extraktion
downtime
Wörtliches Zitat anzeigen (Section IV.B Model and tools)
For the downtime that generates 35% of the waste in the production of type D biscuits, the TPM tool will be used since these downtimes are reflected in machine breakdowns, unplanned stops and minor stoppages.
Aus dem Bericht nicht klassifizierbarAnteil an der Verlustzeit35,0 %Einfache Extraktion
shrinkage
Wörtliches Zitat anzeigen (Stage III: Proposal for improvement and implementation)
The second main cause of waste is shrinkage, which represents 65% of losses.
Aus dem Bericht nicht klassifizierbarAnteil an der Verlustzeit65,0 %Einfache Extraktion
poorly sealed packagesprimary packing machine
Wörtliches Zitat anzeigen (Stage III: Proposal for improvement and implementation / Fig. 6)
as a result there were poorly sealed packages, generating defective products, approximately 23% of the total loss in the production of type D biscuits.
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit23,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Page 4, Main Problem section)
The material performance indicator reflects that the internal objective of 99% in production during 2021 was not achieved, having an average of 97% in the production of type D biscuits.
noneVerfügbarkeit97,0 %Einfache Extraktion

Beobachtungseinheiten

  • Type D cookie production line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Type D cookie production line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage