foratvise
Loslegen
Eingeschlossene Studie

การเพิ่มผลผลิตด้วยวิธีการปรับปรุงประสิทธิผลโดยรวมของเครื่องจักร : กรณีศึกษา โรงงานผลิตอาหารสัตว์

Quelle öffnen

1Bibliografische Angaben

Autoren
วีรชัย มัฎฐารักษ์, วิมล จันนินวงศ์
Jahr
2010
Publikationsorgan
The Journal Of Industrial Technology
DOI
—
Land
Thailand
Segment
Futtermittel und Heimtiernahrung
Prozessfamilie
Formen, Backen und Garen
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · 2 Linien · 3 Maschinen
Beobachtungszeitraum
90 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
การศึกษาครั้งนี้มีวัตถุประสงคเพื่อตองการเพิ่มผลผลิตดวยวิธีการ OEE หรือการปรับปรุงคาประสิทธิผลโดยรวมของเครื่องจักรอัดเม็ดในโรงงานผลิตอาหารสัตวน้ํา

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 9Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—MP30
Wörtliches Zitat anzeigen (Table 6)
MP 30 75.42 93.72 18.31%
noneOEE75,4 %Beide Extraktionen übereinstimmend
—C07
Wörtliches Zitat anzeigen (Table 6)
C07 73.88 85.97 12.09%
noneOEE73,9 %Beide Extraktionen übereinstimmend
Waiting Time for raw material (รอวัตถุดิบ)C06
Wörtliches Zitat anzeigen (Table 4)
รอวัตถุดิบ(Waiting Time) 10.08
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Verlustzeit10,1 hBeide Extraktionen übereinstimmend
Machine Adjustment (ปรับตั้งเครื่องจักร)C06
Wörtliches Zitat anzeigen (Table 4)
ปรับตั้งเครื่องจักร 15.83
Rüsten und EinstellenVerlustzeit15,8 hBeide Extraktionen übereinstimmend
Die Change (เปลี่ยน DIE)C06
Wörtliches Zitat anzeigen (Table 4)
เปลี่ยน DIE 12.17
Rüsten und EinstellenVerlustzeit12,2 hBeide Extraktionen übereinstimmend
Break Down (เสียรอซอม)C06
Wörtliches Zitat anzeigen (Table 4)
เสียรอซอม(Break Down) 5.33
Anlagenausfall (Störungen)Verlustzeit5,33 hBeide Extraktionen übereinstimmend
—C06
Wörtliches Zitat anzeigen (Table 6)
C06 74.59 83.22 8.63%
noneOEE74,6 %Beide Extraktionen übereinstimmend
Clear line / recipe change (Clear line เปลี่ยนสูตร)C06
Wörtliches Zitat anzeigen (Table 4)
Clear line เปลี่ยนสูตร 25.4
Rüsten und EinstellenVerlustzeit25,4 hBeide Extraktionen übereinstimmend
Production stop (หยุดผลิต)C06
Wörtliches Zitat anzeigen (Table 3)
หยุดผลิต 8
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit8,00 hEinfache Extraktion
Cleaning (ทําความสะอาด)C06
Wörtliches Zitat anzeigen (Table 3)
ทําความสะอาด 0
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit0 hEinfache Extraktion
Short pellet size (ขนาดเม็ดสั้น)C06
Wörtliches Zitat anzeigen (Table 5)
ขนาดเม็ดสั้น 0.60
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote0,600 ตันEinfache Extraktion
Two colors (สองสี)C06
Wörtliches Zitat anzeigen (Table 5)
สองสี 1.20
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote1,20 ตันEinfache Extraktion
Wet lump (กอนเปยกปน)C06
Wörtliches Zitat anzeigen (Table 5)
กอนเปยกปน 0.00
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote0 ตันEinfache Extraktion
Excess dust (ฝุนเกินมาตรฐาน)C06
Wörtliches Zitat anzeigen (Table 5)
ฝุนเกินมาตรฐาน 0.00
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote0 ตันEinfache Extraktion
Burnt pellet (เม็ดไหม)C06
Wörtliches Zitat anzeigen (Table 5)
เม็ดไหม 0.50
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote0,500 ตันEinfache Extraktion
Durability test failure (คาความคงทนไมผาน)C06
Wörtliches Zitat anzeigen (Table 5)
คาความคงทนไมผาน 0.00
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote0 ตันEinfache Extraktion
ReprocessC06
Wörtliches Zitat anzeigen (Table 5)
Reprocess 59.37
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote59,4 ตันEinfache Extraktion
—C06
Wörtliches Zitat anzeigen (Table 6)
C06 74.59 83.22 8.63%
noneOEE83,2 %Einfache Extraktion
—C07
Wörtliches Zitat anzeigen (Table 6)
C07 73.88 85.97 12.09%
noneOEE86,0 %Einfache Extraktion
—MP30
Wörtliches Zitat anzeigen (Table 6)
MP 30 75.42 93.72 18.31%
noneOEE93,7 %Einfache Extraktion
Break Down
Wörtliches Zitat anzeigen (Figure 3 Pareto Chart for Cause)
Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9
Anlagenausfall (Störungen)Verlustzeit38,3 hEinfache Extraktion
Break Down
Wörtliches Zitat anzeigen (Figure 3 Pareto Chart for Cause)
Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9
Anlagenausfall (Störungen)Anteil an der Verlustzeit6,50 %Einfache Extraktion
Machine Adjustment
Wörtliches Zitat anzeigen (Figure 3 Pareto Chart for Cause)
Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9
Rüsten und EinstellenVerlustzeit105 hEinfache Extraktion
Machine Adjustment
Wörtliches Zitat anzeigen (Figure 3 Pareto Chart for Cause)
Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9
Rüsten und EinstellenAnteil an der Verlustzeit17,9 %Einfache Extraktion
Die Change
Wörtliches Zitat anzeigen (Figure 3 Pareto Chart for Cause)
Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9
Rüsten und EinstellenVerlustzeit112 hEinfache Extraktion
Die Change
Wörtliches Zitat anzeigen (Figure 3 Pareto Chart for Cause)
Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9
Rüsten und EinstellenAnteil an der Verlustzeit19,1 %Einfache Extraktion
Waiting Time
Wörtliches Zitat anzeigen (Figure 3 Pareto Chart for Cause)
Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Verlustzeit150 hEinfache Extraktion
Waiting Time
Wörtliches Zitat anzeigen (Figure 3 Pareto Chart for Cause)
Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an der Verlustzeit25,5 %Einfache Extraktion
Clearline
Wörtliches Zitat anzeigen (Figure 3 Pareto Chart for Cause)
Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9
Rüsten und EinstellenVerlustzeit182 hEinfache Extraktion
Clearline
Wörtliches Zitat anzeigen (Figure 3 Pareto Chart for Cause)
Bre ak D ow n Machine Adjus tme nt Die Ch an ge Waiting Time C lea rline 38.33 105.00 112.17 149.83 181.67 6.5 17.9 19.1 25.5 30.9 100.0 93.5 75.6 56.5 30.9
Rüsten und EinstellenAnteil an der Verlustzeit30,9 %Einfache Extraktion

Beobachtungseinheiten

  • MP30 · Extrudieren · Ausgangslage
  • C07 · Extrudieren · Ausgangslage
  • C06 · Extrudieren · Ausgangslage
  • C06 · Extrudieren · Nach der Intervention
  • C07 · Extrudieren · Nach der Intervention
  • MP30 · Extrudieren · Nach der Intervention
  • Pelleting machines C06+C07+MP30 (combined, pre-improvement Pareto) · Extrudieren · Ausgangslage