foratvise
Loslegen
Eingeschlossene Studie

Proposal for OEE (Overall Equipment Effectiveness) Indicator Deployment in a Beverage Plant

Quelle öffnen

1Bibliografische Angaben

Autoren
Fabiana Pereira Castro, Fernando Oliveira de Araújo
Jahr
2012
Publikationsorgan
Brazilian Journal of Operations & Production Management
Land
Brazil
Segment
Erfrischungsgetränke, abgefülltes Wasser und Säfte
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Einzelfallstudie
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · — Maschinen
Beobachtungszeitraum
11 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
The investigation is limited to monitoring the OEE indicator in a machine for filling beverage in PET bottles of 1500 mL, operating in a continuous regime of approximately 4,800 units per hour.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 11Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
Problem in the filler (code 6003)filler
Wörtliches Zitat anzeigen (Line Downtimes section / Figure 3)
The code 6003, referring to downtimes caused by problems with the filler, consumed 473 minutes, having occurred 44 times during the period assessed in this work (Figure 3).
Anlagenausfall (Störungen)Anzahl der Ereignisse44,0 eventsDurch Schiedsentscheid
Problem in the filler (code 6003)filler
Wörtliches Zitat anzeigen (Line Downtimes section / Figure 3)
The code 6003, referring to downtimes caused by problems with the filler, consumed 473 minutes, having occurred 44 times during the period assessed in this work (Figure 3).
Anlagenausfall (Störungen)Verlustzeit473 minDurch Schiedsentscheid
Problem in the inkjet printer (code 6004)inkjet printer
Wörtliches Zitat anzeigen (Line Downtimes section)
the company spent 245 and 273 minutes to repair the equipment between the studied days 04 and 05.
Anlagenausfall (Störungen)Verlustzeit273 minBeide Extraktionen übereinstimmend
Problem in the inkjet printer (code 6004)inkjet printer
Wörtliches Zitat anzeigen (Line Downtimes section)
the company spent 245 and 273 minutes to repair the equipment between the studied days 04 and 05.
Anlagenausfall (Störungen)Verlustzeit245 minBeide Extraktionen übereinstimmend
Discarded PET bottles (waste)filler
Wörtliches Zitat anzeigen (OEE section, text)
According to the history, the waste of these bottles was around 3%.
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote3,00 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Analysis and Result Discussion / Figure 4)
On day 09, the third figure below the expected (33%) was a result of successive electrical problems in the packing, inkjet printer and filler, respectively, compromising the final index.
noneOEE33,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Analysis and Result Discussion / Figure 4)
The days 04 and 05 show the smallest figures of the OEE, 8 and 11%, respectively.
noneOEE11,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Analysis and Result Discussion / Figure 4)
The days 04 and 05 show the smallest figures of the OEE, 8 and 11%, respectively.
noneOEE8,00 %Beide Extraktionen übereinstimmend
Return/reuse of after-filling PET bottlesfiller
Wörtliches Zitat anzeigen (Table 3)
According to Table 3, an average of 3.6% of the bottles in good conditions of use was reutilized for new bottling processes.
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote3,60 %Beide Extraktionen übereinstimmend
Short mechanical interventions in the filler for small adjustments (3-15 min interval)filler
Wörtliches Zitat anzeigen (Figure 3)
the major occurrences of line downtimes consumed between 3 and 15 minutes of production, in equivalent proportions, summing 287 minutes (61% of the whole time) and characterizing the effectuation of short mechanical interventions in the filler for small adjustments (Figure 3).
Anlagenausfall (Störungen)Anteil an der Verlustzeit61,0 %Durch Schiedsentscheid
Short mechanical interventions in the filler for small adjustments (3-15 min interval)filler
Wörtliches Zitat anzeigen (Figure 3)
the major occurrences of line downtimes consumed between 3 and 15 minutes of production, in equivalent proportions, summing 287 minutes (61% of the whole time) and characterizing the effectuation of short mechanical interventions in the filler for small adjustments (Figure 3).
Anlagenausfall (Störungen)Verlustzeit287 minDurch Schiedsentscheid
—
Wörtliches Zitat anzeigen (Page 11)
Even though the process shows expressive figures for the Quality indicator, between 93 and 98%
noneQualität93,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Page 11)
Even though the process shows expressive figures for the Quality indicator, between 93 and 98%
noneQualität98,0 %Einfache Extraktion

Beobachtungseinheiten

  • Beverage PET bottling production line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • PET bottle filling line · Abfüllen · Ausgangslage