Eingeschlossene Studie
PERENCANAAN TOTAL PRODUCTIVE MAINTENANCE(TPM) UNTUK MENINGKATKAN PRODUKTIVITAS STASIUN GILINGAN PADA PG KEBON AGUNG
1Bibliografische Angaben
- Autoren
- Mochammad Harits Trysnawan Amaanullah, Rina Sandora, Pranowo Sidi
- Jahr
- 2017
- Publikationsorgan
- Seminar K3
- DOI
- —
- Land
- Indonesia
- Segment
- Zucker und Süßwaren
- Prozessfamilie
- Mahlen, Extrahieren und Trennen
- Studientyp
- Einzelfallstudie
- Extraktionsumfang
- Nur Abstract
- Umfang
- 1 Werke · 1 Linien · — Maschinen
- Beobachtungszeitraum
- 510 Tage
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
PG Kebon Agung has 15.000 TCD set milling capacity and 12.500 TCD effective milling capacity.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 7Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
machinery damage (breakdown)milling stationWörtliches Zitat anzeigen (abstract)machinery damage leads to milling stops for about 766.61 hours which affect to a not optimum production process. | Anlagenausfall (Störungen) | Verlustzeit | 767 hours | Beide Extraktionen übereinstimmend |
—milling stationWörtliches Zitat anzeigen (abstract)OEE number on 2014-2016 ranged on 78.15% until 83.18%. | none | OEE | 78,2 % | Einfache Extraktion |
—milling stationWörtliches Zitat anzeigen (abstract)OEE number on 2014-2016 ranged on 78.15% until 83.18%. | none | OEE | 83,2 % | Einfache Extraktion |
Beobachtungseinheiten
- Stasiun Gilingan (milling station) · Mahlen und Zerkleinern · Ausgangslage

