Eingeschlossene Studie
ANALISIS KERUSAKAN BEARING MAIN SHAFT PADA MESIN SCREW PRESS MSB 15 DENGAN METODE TOTAL PRODUCTIVE MAINTENANCE (TPM) DI PABRIK KELAPA SAWIT PT. XYZ
1Bibliografische Angaben
- Autoren
- Nina Hairiyah, Imron Musthofa, Aminah Aminah
- Jahr
- 2024
- Publikationsorgan
- Jurnal Teknologi Pertanian Andalas
- Land
- Indonesia
- Segment
- Getreide- und Ölsaatenmüllerei
- Prozessfamilie
- Schlachtung, Zerlegung und Primärverarbeitung
- Studientyp
- Einzelfallstudie
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 3 Maschinen
- Beobachtungszeitraum
- 61 Tage
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
Mesin press di PT. XYZ berjumlah 3 (tiga) unit dengan kapasitas produksi yang sama yaitu 15 ton/jam.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 14Geringes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
Human error (Tidak mengikuti SOP) dalam pengoperasianbearing main shaftWörtliches Zitat anzeigen (Table 1)Man (manusia) 24% Human error (Tidak mengikuti SOP) dalam pengoperasian | Anlagenausfall (Störungen) | Anteil an den Verlustereignissen | 24,0 % | Beide Extraktionen übereinstimmend |
Engine error (Tidak maksimal)bearing main shaftWörtliches Zitat anzeigen (Table 1)Machine (sistem operasi) 39% Engine error (Tidak maksimal) | Anlagenausfall (Störungen) | Anteil an den Verlustereignissen | 39,0 % | Beide Extraktionen übereinstimmend |
—screw pressWörtliches Zitat anzeigen (Table 5)Rata-rata 77% 89,57% 100% 68,5% | none | OEE | 68,5 % | Beide Extraktionen übereinstimmend |
—screw pressWörtliches Zitat anzeigen (Table 5)Rata-rata 77% 89,57% 100% 68,5% | none | Verfügbarkeit | 77,0 % | Beide Extraktionen übereinstimmend |
Kemasukan besi, kawat dll.bearing main shaftWörtliches Zitat anzeigen (Table 1)Materials (bahan baku) 37% Kemasukan besi, kawat dll. | Anlagenausfall (Störungen) | Anteil an den Verlustereignissen | 37,0 % | Beide Extraktionen übereinstimmend |
—screw pressWörtliches Zitat anzeigen (Table 2)Screw Press November 2022 34,17 105,83 140 75% | Anlagenausfall (Störungen) | Verlustzeit | 34,2 jam | Einfache Extraktion |
—screw pressWörtliches Zitat anzeigen (Table 2)Desember 2022 44,22 161,06 205,28 78% | Anlagenausfall (Störungen) | Verlustzeit | 44,2 jam | Einfache Extraktion |
—screw pressWörtliches Zitat anzeigen (Table 5)Rata-rata 77% 89,57% 100% 68,5% | none | Leistung | 89,6 % | Einfache Extraktion |
—screw pressWörtliches Zitat anzeigen (Table 5)Rata-rata 77% 89,57% 100% 68,5% | none | Qualität | 100 % | Einfache Extraktion |
Beobachtungseinheiten
- Screw Press (stasiun press, mesin MSB 15) · Trennen (Zentrifugieren, Filtrieren, Membranverfahren) · Ausgangslage

