Eingeschlossene Studie
Impact of welding steel rod rotor bars on ripple mill efficiency and cost-effectiveness at Sumatera Jaya Agro Lestari Sawit Coconut Plant
1Bibliografische Angaben
- Autoren
- Sudirman Lubis, Rafsanzani Pane, Irpansyah Siregar
- Jahr
- 2023
- Publikationsorgan
- Jurnal POLIMESIN
- Land
- Indonesia
- Segment
- Getreide- und Ölsaatenmüllerei
- Prozessfamilie
- Mahlen, Extrahieren und Trennen
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 1 Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
at PT. Sumatera Jaya Agro Lestari Palm Oil Mill Tayan Kalimantan West, it can be concluded that the results of the welding against the steel rood ripple mill process can increase the efficiency of the kernel
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 6Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
whole nut (Wn)ripple mill rotor bar / steel rodWörtliches Zitat anzeigen (Table 1)Wn 20.1 g 1.95 | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 1,95 % | Einfache Extraktion |
broke nut (Bn)ripple mill rotor bar / steel rodWörtliches Zitat anzeigen (Table 1)Bn 106.7 g 8.73 | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 8,73 % | Einfache Extraktion |
—ripple millWörtliches Zitat anzeigen (Table 1)Eff. RM 89.32 | none | Ausbeute | 89,3 % | Einfache Extraktion |
whole nut (Wn)ripple mill rotor bar / steel rodWörtliches Zitat anzeigen (Table 2)Wn 15. 6 g 1.48 | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 1,48 % | Einfache Extraktion |
broke nut (Bn)ripple mill rotor bar / steel rodWörtliches Zitat anzeigen (Table 2)Bn 89.7 g 10.14 | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 10,1 % | Einfache Extraktion |
—ripple millWörtliches Zitat anzeigen (Table 2)Eff. RM 88.38 | none | Ausbeute | 88,4 % | Einfache Extraktion |
whole nut (Wn)ripple mill rotor bar / steel rodWörtliches Zitat anzeigen (Table 3)Wn 9.4 g 0.89 | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 0,890 % | Einfache Extraktion |
broke nut (Bn)ripple mill rotor bar / steel rodWörtliches Zitat anzeigen (Table 3)Bn 53.6 g 5.09 | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 5,09 % | Einfache Extraktion |
—ripple millWörtliches Zitat anzeigen (Table 3)Eff.RM 94.02 | none | Ausbeute | 94,0 % | Einfache Extraktion |
whole nut (Wn)ripple mill rotor bar / steel rodWörtliches Zitat anzeigen (Table 4)Wn 12.8 g 1.23 | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 1,23 % | Einfache Extraktion |
broke nut (Bn)ripple mill rotor bar / steel rodWörtliches Zitat anzeigen (Table 4)Bn 54.7 g 5.29 | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 5,29 % | Einfache Extraktion |
—ripple millWörtliches Zitat anzeigen (Table 4)Eff.RM 93.48 | none | Ausbeute | 93,5 % | Einfache Extraktion |
—ripple millWörtliches Zitat anzeigen (Abstract)the efficiency of the impact of welding steel rod averages 93.38% achieving a very high efficiency | none | Ausbeute | 93,4 % | Einfache Extraktion |
Beobachtungseinheiten
- Ripple mill (worn-out steel rod) · Mahlen und Zerkleinern · Ausgangslage
- Ripple mill (welded/repaired steel rod) · Mahlen und Zerkleinern · Nach der Intervention

