Eingeschlossene Studie
Analysis of Total Productive Maintenance Using Overall Resource Effectiveness (ORE) Methods on Pellet Mill 3 Machine in PT. XYZ
1Bibliografische Angaben
- Autoren
- Tasya Az'zahra Puspita Wardhani, Endang Pudji Widjajati
- Jahr
- 2023
- Publikationsorgan
- IJIEM - Indonesian Journal of Industrial Engineering and Management
- Land
- Indonesia
- Segment
- Futtermittel und Heimtiernahrung
- Prozessfamilie
- Formen, Backen und Garen
- Studientyp
- Einzelfallstudie
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · — Linien · 1 Maschinen
- Beobachtungszeitraum
- 365 Tage
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
Pellet Mill is a critical machine in producing animal feed in pellets and crumbles at PT XYZ.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 14Geringes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Pellet Mill 3Wörtliches Zitat anzeigen (Section 4.1.G / Table 8)the quality rate value of the pellet mill 3 machine shows a value of 100% which means that no defects or process deviations are found in the production results | none | Qualität | 100 % | Beide Extraktionen übereinstimmend |
—Pellet Mill 3Wörtliches Zitat anzeigen (Table 6)Average of Performance Efficiency 81,71% | none | Leistung | 81,7 % | Beide Extraktionen übereinstimmend |
—Pellet Mill 3Wörtliches Zitat anzeigen (Table 5)Average of Availability of Manpower 100% | none | Verfügbarkeit | 100 % | Beide Extraktionen übereinstimmend |
—Pellet Mill 3Wörtliches Zitat anzeigen (Table 4)Average of Availability of Material 96,87% | none | Verfügbarkeit | 96,9 % | Beide Extraktionen übereinstimmend |
—Pellet Mill 3Wörtliches Zitat anzeigen (Table 3)Average of Changeover Efficiency 96,32% | none | Verfügbarkeit | 96,3 % | Beide Extraktionen übereinstimmend |
—Pellet Mill 3Wörtliches Zitat anzeigen (Table 2)Average of Availability of Facility 95,35% | none | Verfügbarkeit | 95,4 % | Beide Extraktionen übereinstimmend |
—Pellet Mill 3Wörtliches Zitat anzeigen (Table 1)Average of Readiness 98,22% | none | Verfügbarkeit | 98,2 % | Beide Extraktionen übereinstimmend |
—Pellet Mill 3Wörtliches Zitat anzeigen (Abstract / Table 8)the effectiveness value is 71.41%, below the Japan Institute of Plant Maintenance (JIPM) standard of 85%. | none | OEE | 71,4 % | Beide Extraktionen übereinstimmend |
Beobachtungseinheiten
- Pellet Mill 3 · Formen, Gießen und Dosieren · Ausgangslage

