Eingeschlossene Studie
Improving Production Efficiency in a Quinoa Exporting Company through an Integrated FEFO, Standardized Work, and TPM Approach
1Bibliografische Angaben
- Autoren
- Mario Alberto Chumbe-Sausa, Arelys Karen Casas-Apolinario, Gino Viacava-Campos, Jorge Antonio Corzo-Chávez
- Jahr
- 2025
- Publikationsorgan
- International Conference on Industrial Engineering and Operations Management (IEOM)
- Land
- Peru
- Segment
- Getreide- und Ölsaatenmüllerei
- Prozessfamilie
- Schlachtung, Zerlegung und Primärverarbeitung
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 1 Maschinen
- Beobachtungszeitraum
- 60 Tage
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
The company analyzed in this study reports a production yield of 84.13%, which is significantly below the sector benchmark of 93.8%, resulting in a technical gap of 9.7%.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 10Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
excessive machine pressurepolishing machineWörtliches Zitat anzeigen (Table 1)Waste Rate (%) – Excessive Machine Pressure TPM 15% 5% – 11% 7% (Pilot Est.) | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 15,0 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 1)Production Yield (%) — 84.13% ≥ 90% 88.5% (Pilot Est.) | none | Ausbeute | 84,1 % | Beide Extraktionen übereinstimmend |
inadequate inventory rotationWörtliches Zitat anzeigen (Table 1)Reprocessing Rate – Inventory Rotation (%) FEFO 37% (311.52 tons/year) 15% (126.3 tons/year) 12% (40 tons/year) | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 37,0 % | Einfache Extraktion |
microbiological non-conformities during raw material conditioning (initial control failures)Wörtliches Zitat anzeigen (Table 1)Reprocessing Rate – Initial Control Failures (%) Standardized Work 63% (530 tons/year) 25% (210 tons/year) 24% (126 tons/year) | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 63,0 % | Einfache Extraktion |
improper speed settingspolishing machineWörtliches Zitat anzeigen (Table 1)Broken Grain Rate (%) – Improper Speed Settings TPM 9% 3% 4.1% (Pilot Est.) | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 9,00 % | Einfache Extraktion |
inadequate inventory rotationWörtliches Zitat anzeigen (Table 1)Reprocessing Rate – Inventory Rotation (%) FEFO 37% (311.52 tons/year) 15% (126.3 tons/year) 12% (40 tons/year) | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 12,0 % | Einfache Extraktion |
microbiological non-conformities during raw material conditioning (initial control failures)Wörtliches Zitat anzeigen (Table 1)Reprocessing Rate – Initial Control Failures (%) Standardized Work 63% (530 tons/year) 25% (210 tons/year) 24% (126 tons/year) | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 24,0 % | Einfache Extraktion |
inadequate inventory rotationWörtliches Zitat anzeigen (Page 2)37% of reprocessing is associated with inadequate inventory rotation | Prozessfehler (Ausschuss und Nacharbeit) | Anteil an der Verlustzeit | 37,0 % | Einfache Extraktion |
inadequate inventory rotationWörtliches Zitat anzeigen (Table 1)311.52 tons/year | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 312 tons/year | Einfache Extraktion |
microbiological non-conformities during raw material conditioningWörtliches Zitat anzeigen (Page 2)63% is linked to microbiological non-conformities during raw material conditioning | Prozessfehler (Ausschuss und Nacharbeit) | Anteil an der Verlustzeit | 63,0 % | Einfache Extraktion |
microbiological non-conformities during raw material conditioningWörtliches Zitat anzeigen (Table 1)530 tons/year | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 530 tons/year | Einfache Extraktion |
grain breakage during polishingpolishing machineWörtliches Zitat anzeigen (Page 2)21.8 tons of grain breakage occur during the polishing stage | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 21,8 tons/year | Einfache Extraktion |
sack processing cycle timepolishing machineWörtliches Zitat anzeigen (Page 8)The AS IS scenario exhibited an average system time of 7.8 minutes, with a confidence interval of (7.55; 8.05) | none | Mittlere Ereignisdauer | 7,80 min | Einfache Extraktion |
system loss (composition unspecified)polishing machineWörtliches Zitat anzeigen (Page 8)the system exhibited a mean loss rate of 15% with a wide interval of (10%; 20%) | Aus dem Bericht nicht klassifizierbar | Anteil an der geplanten Zeit | 15,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 1)88.5% (Pilot Est.) | none | Ausbeute | 88,5 % | Einfache Extraktion |
inadequate inventory rotationWörtliches Zitat anzeigen (Table 1)12% (40 tons/year) | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 40,0 tons/year | Einfache Extraktion |
microbiological non-conformities during raw material conditioningWörtliches Zitat anzeigen (Table 1)24% (126 tons/year) | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 126 tons/year | Einfache Extraktion |
excessive machine pressurepolishing machineWörtliches Zitat anzeigen (Table 1)7% (Pilot Est.) | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 7,00 % | Einfache Extraktion |
improper speed settingspolishing machineWörtliches Zitat anzeigen (Table 1)4.1% (Pilot Est.) | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 4,10 % | Einfache Extraktion |
Beobachtungseinheiten
- Quinoa processing line (AS-IS baseline) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Quinoa processing line (pilot, post-intervention) · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
- Production line (AS-IS baseline) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Production line (Post-intervention pilot) · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention

