foratvise
Loslegen
Eingeschlossene Studie

Proposal to reduce material and product waste in a manufacturing process

Quelle öffnen

1Bibliografische Angaben

Autoren
Vinicius Croque
Jahr
2021
Publikationsorgan
Institutional Repository of the Federal Technological University of Paraná (RIUT) (Federal University of Technology – Paraná)
DOI
—
Land
—
Segment
Milchprodukte
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Nur Abstract
Umfang
1 Werke · 1 Linien · — Maschinen
Beobachtungszeitraum
—
Datenerhebung
not_reported
Intervention
Umfeld laut Studie anzeigen
used to analyze all losses related to plastic sheet and product of a yogurt filling process

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 5Hohes Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
mechanical maintenance failures
Wörtliches Zitat anzeigen (abstract)
view the decrease in machine downtime due to mechanical maintenance failures, which was 54 hours approximately, reducing to 20 hours, in a period of next comparison.
Anlagenausfall (Störungen)Verlustzeit20,0 hBeide Extraktionen übereinstimmend
mechanical maintenance failures
Wörtliches Zitat anzeigen (abstract)
view the decrease in machine downtime due to mechanical maintenance failures, which was 54 hours approximately, reducing to 20 hours, in a period of next comparison.
Anlagenausfall (Störungen)Verlustzeit54,0 hBeide Extraktionen übereinstimmend

Beobachtungseinheiten

  • Yogurt filling line · Abfüllen · Nach der Intervention
  • Yogurt filling line · Abfüllen · Ausgangslage