Eingeschlossene Studie
Proposal to Enhance Productivity by Applying Lean Manufacturing Tools in a Fish Canning Company
1Bibliografische Angaben
- Autoren
- Flavia Espinoza-Montero, Rodrigo R. Quintanilla-Chalan, Jorge Antonio Corzo-Chávez, Gino Viacava-Campos
- Jahr
- 2026
- Publikationsorgan
- Congreso Internacional de Ingeniería Industrial de la Universidad de Lima
- Land
- Peru
- Segment
- Fleisch, Geflügel und Fisch
- Prozessfamilie
- Schlachtung, Zerlegung und Primärverarbeitung
- Studientyp
- Simulation (nur Eingangsdaten)
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 2 Maschinen
- Beobachtungszeitraum
- 30 Tage
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
the studied company is a medium-sized fish canning processor operating two 8-hour shifts with an installed capacity of 180 tons per shift.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 9Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%. | 0 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
Overheating due to filter cloggingAutoclaveWörtliches Zitat anzeigen (Table III)Overheating due to filter clogging 4 30 2.1 | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 4,00 occurrences/month | Beide Extraktionen übereinstimmend |
Control instrument misalignmentAutoclaveWörtliches Zitat anzeigen (Table III)Control instrument misalignment 5 40 3.2 | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 5,00 occurrences/month | Beide Extraktionen übereinstimmend |
Sealing mechanism malfunctionAutoclaveWörtliches Zitat anzeigen (Table III)Sealing mechanism malfunction 9 28 3.8 | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 9,00 occurrences/month | Beide Extraktionen übereinstimmend |
Pressure calibration failureAutoclaveWörtliches Zitat anzeigen (Table III)Pressure calibration failure 12 35 4.5 | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 12,0 occurrences/month | Beide Extraktionen übereinstimmend |
Gasket wear and replacementAutoclaveWörtliches Zitat anzeigen (Table III)Gasket wear and replacement 7 22 2.7 | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 7,00 occurrences/month | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table IV)Defect rate 13% 4.3% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 13,0 % | Durch Schiedsentscheid |
Overheating due to filter cloggingAutoclaveWörtliches Zitat anzeigen (Table III)Overheating due to filter clogging 4 30 2.1 | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 2,10 % | Beide Extraktionen übereinstimmend |
Overheating due to filter cloggingAutoclaveWörtliches Zitat anzeigen (Table III)Overheating due to filter clogging 4 30 2.1 | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 30,0 min | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Abstract)Labor productivity increased from 6 to 7 units/h | none | Durchsatz | 6,00 units/h | Beide Extraktionen übereinstimmend |
Control instrument misalignmentAutoclaveWörtliches Zitat anzeigen (Table III)Control instrument misalignment 5 40 3.2 | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 3,20 % | Beide Extraktionen übereinstimmend |
Control instrument misalignmentAutoclaveWörtliches Zitat anzeigen (Table III)Control instrument misalignment 5 40 3.2 | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 40,0 min | Beide Extraktionen übereinstimmend |
Sealing mechanism malfunctionAutoclaveWörtliches Zitat anzeigen (Table III)Sealing mechanism malfunction 9 28 3.8 | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 3,80 % | Beide Extraktionen übereinstimmend |
Sealing mechanism malfunctionAutoclaveWörtliches Zitat anzeigen (Table III)Sealing mechanism malfunction 9 28 3.8 | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 28,0 min | Beide Extraktionen übereinstimmend |
Pressure calibration failureAutoclaveWörtliches Zitat anzeigen (Table III)Pressure calibration failure 12 35 4.5 | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 4,50 % | Beide Extraktionen übereinstimmend |
Pressure calibration failureAutoclaveWörtliches Zitat anzeigen (Table III)Pressure calibration failure 12 35 4.5 | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 35,0 min | Beide Extraktionen übereinstimmend |
Gasket wear and replacementAutoclaveWörtliches Zitat anzeigen (Table III)Gasket wear and replacement 7 22 2.7 | Anlagenausfall (Störungen) | Anteil an der geplanten Zeit | 2,70 % | Beide Extraktionen übereinstimmend |
Gasket wear and replacementAutoclaveWörtliches Zitat anzeigen (Table III)Gasket wear and replacement 7 22 2.7 | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 22,0 min | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section III Results, Fig. 10)the OEE indicator initially stood at 63.2%, with a target of 85%. | none | OEE | 63,2 % | Beide Extraktionen übereinstimmend |
Calibration verificationSealing machineWörtliches Zitat anzeigen (Table I)Calibration verification 85 min X | Rüsten und Einstellen | Verlustzeit | 85,0 min | Einfache Extraktion |
Daily cleaning of sealing headsSealing machineWörtliches Zitat anzeigen (Table I)Daily cleaning of sealing heads 65 s X | Rüsten und Einstellen | Verlustzeit | 65,0 s | Einfache Extraktion |
Pressure adjustmentSealing machineWörtliches Zitat anzeigen (Table I)Pressure adjustment 60 s X | Rüsten und Einstellen | Verlustzeit | 60,0 s | Einfache Extraktion |
Seal replacementSealing machineWörtliches Zitat anzeigen (Table I)Seal replacement 85 s X | Rüsten und Einstellen | Verlustzeit | 85,0 s | Einfache Extraktion |
Inspection of worn partsSealing machineWörtliches Zitat anzeigen (Table I)Inspection of worn parts 60 s X | Rüsten und Einstellen | Verlustzeit | 60,0 s | Einfache Extraktion |
Roller inspectionSealing machineWörtliches Zitat anzeigen (Table I)Roller inspection 70 s X | Rüsten und Einstellen | Verlustzeit | 70,0 s | Einfache Extraktion |
Sealing mechanism adjustmentSealing machineWörtliches Zitat anzeigen (Table I)Sealing mechanism adjust- ment 90 s X | Rüsten und Einstellen | Verlustzeit | 90,0 s | Einfache Extraktion |
Inspection and lubrication of moving partsSealing machineWörtliches Zitat anzeigen (Table I)Inspection and lubrication of moving parts 80 s X | Rüsten und Einstellen | Verlustzeit | 80,0 s | Einfache Extraktion |
General equipment cleaningSealing machineWörtliches Zitat anzeigen (Table I)General equipment cleaning 120 s X | Rüsten und Einstellen | Verlustzeit | 120 s | Einfache Extraktion |
Gasket replacementSealing machineWörtliches Zitat anzeigen (Table I)Gasket replacement 80 s X | Rüsten und Einstellen | Verlustzeit | 80,0 s | Einfache Extraktion |
—AutoclaveWörtliches Zitat anzeigen (Section IV Discussion)MTBF improved from 3.2 to 6.8 h, and MTTR decreased from 28 to 15 min, confirming increased equipment reliability and faster recovery. | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 3,20 h | Einfache Extraktion |
—AutoclaveWörtliches Zitat anzeigen (Section IV Discussion)MTBF improved from 3.2 to 6.8 h, and MTTR decreased from 28 to 15 min, confirming increased equipment reliability and faster recovery. | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 28,0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section IV Discussion)The availability rate increased from 70.4% to 85.2%, closing 91.7% of the performance gap toward the 90% target. | none | Verfügbarkeit | 70,4 % | Einfache Extraktion |
equipment failure rateWörtliches Zitat anzeigen (Abstract)equipment failure rates declined from 13.67% to 4.59% | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 13,7 % | Einfache Extraktion |
—Sealing machineWörtliches Zitat anzeigen (Results section, page 58)the setup time of the sealing machine was reduced from 12.9 to 5.3 min | Rüsten und Einstellen | Verlustzeit | 12,9 min | Einfache Extraktion |
Beobachtungseinheiten
- Autoclave · Sterilisieren (Autoklav, UHT) · Ausgangslage
- Whole plant · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Sealing machine · Verschließen und Falzen · Ausgangslage

