foratvise
Loslegen
Eingeschlossene Studie

Optimizing Side Guard Angles on Multi-to-Single Conveyors to Minimize Infeed Stuck and Increase Overall Equipment Effectiveness

Quelle öffnen

1Bibliografische Angaben

Autoren
Lusianawati, Muchamad Malik, Wardatul Jannah
Jahr
2026
Publikationsorgan
JURUTERA - Jurnal Umum Teknik Terapan
Land
Indonesia
Segment
Erfrischungsgetränke, abgefülltes Wasser und Säfte
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · 1 Maschinen
Beobachtungszeitraum
5 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
At PT XYZ, frequent empty-can jamming (infeed stuck) in the multi-to-single conveyor section caused significant filler machine downtime and reduced production efficiency.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 14Geringes Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—filler machine
Wörtliches Zitat anzeigen (Tabel 2)
Kecepatan Aktual (kaleng/jam) 36.300 47.760 +11.460 kaleng/jam
noneDurchsatz47.760 kaleng/jamBeide Extraktionen übereinstimmend
Infeed Stuckmulti-to-single conveyor / side guard (combiner plow)
Wörtliches Zitat anzeigen (Tabel 2)
Infeed Stuck (menit) 128,0 73,1 -54,9 menit
Leerlauf und KurzstillständeVerlustzeit73,1 menitBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Tabel 2)
Overall Equipment Effectiveness (OEE) 55,36% 83,92% +28,56%
noneOEE55,4 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Tabel 2)
Quality (Tingkat Kualitas) 99,82% 99,98% +0,16%
noneQualität99,8 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Tabel 2)
Performance (Efisiensi Kinerja) 75,63% 99,50% +23,87%
noneLeistung75,6 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Tabel 2)
Availability (Ketersediaan) 73,33% 84,77% +11,44%
noneVerfügbarkeit73,3 %Beide Extraktionen übereinstimmend
—filler machine
Wörtliches Zitat anzeigen (Tabel 2)
Kecepatan Aktual (kaleng/jam) 36.300 47.760 +11.460 kaleng/jam
noneDurchsatz36.300 kaleng/jamBeide Extraktionen übereinstimmend
Infeed Stuckmulti-to-single conveyor / side guard (combiner plow)
Wörtliches Zitat anzeigen (Tabel 2)
Infeed Stuck (menit) 128,0 73,1 -54,9 menit
Leerlauf und KurzstillständeVerlustzeit128 menitBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Tabel 2)
Quality (Tingkat Kualitas) 99,82% 99,98% +0,16%
noneQualität100,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Tabel 2)
Overall Equipment Effectiveness (OEE) 55,36% 83,92% +28,56%
noneOEE83,9 %Beide Extraktionen übereinstimmend
Produk Cacat / Rejectmulti-to-single conveyor / filler
Wörtliches Zitat anzeigen (Tabel 2)
Produk Cacat / Reject (kaleng) 65 9 -56 kaleng
Prozessfehler (Ausschuss und Nacharbeit)Anzahl der Ereignisse9,00 kalengBeide Extraktionen übereinstimmend
Produk Cacat / Rejectmulti-to-single conveyor / filler
Wörtliches Zitat anzeigen (Tabel 2)
Produk Cacat / Reject (kaleng) 65 9 -56 kaleng
Prozessfehler (Ausschuss und Nacharbeit)Anzahl der Ereignisse65,0 kalengBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Tabel 2)
Availability (Ketersediaan) 73,33% 84,77% +11,44%
noneVerfügbarkeit84,8 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Tabel 2)
Performance (Efisiensi Kinerja) 75,63% 99,50% +23,87%
noneLeistung99,5 %Einfache Extraktion

Beobachtungseinheiten

  • Multi-to-single conveyor / filler line (PT XYZ), side guard 2° · Fördern und Puffern · Nach der Intervention
  • Multi-to-single conveyor / filler line (PT XYZ), side guard 3° · Fördern und Puffern · Ausgangslage