Eingeschlossene Studie
Robust DMAIC-Driven Optimization of Expansion Index in Cereal Extrusion Using DOE and SHAP-Based Factor Screening
1Bibliografische Angaben
- Autoren
- Ángel Geovanny Guamán Lozano, Julio César Moyano Alulema, Jhofre Ramiro Guamán Quishpi
- Jahr
- 2026
- Publikationsorgan
- Industrial Engineering & Management Systems
- Land
- —
- Segment
- Snacks, Kaffee, Tee und sonstige Lebensmittel
- Prozessfamilie
- Formen, Backen und Garen
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Nur Abstract
- Umfang
- 1 Werke · 1 Linien · — Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
This study presents a DMAIC-driven framework to reduce variability and improve control of the Expansion Index(EI) in an industrial cereal extrusion line by integrating statistical experimentation with SHAP-based factor screening.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 5Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—cereal extrusion lineWörtliches Zitat anzeigen (abstract)A baseline diagnosis from 203 EI observations showed an incapable process, with 597545.45 PPM out of specification, Ppk = 0.13, and instability in X̄ –S control charts. | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 597.545 PPM | Einfache Extraktion |
unplanned downtimecereal extrusion lineWörtliches Zitat anzeigen (abstract)unplanned downtime decreasing from 600 to 300 min/week | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 600 min/week | Einfache Extraktion |
—cereal extrusion lineWörtliches Zitat anzeigen (abstract)Post-improvement verification confirmed reduced variability, with standard deviation decreasing from 0.3544 to 0.06126, nonconformities falling to 17699.86 PPM, and unplanned downtime decreasing from 600 to 300 min/week. | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 17.700 PPM | Einfache Extraktion |
unplanned downtimecereal extrusion lineWörtliches Zitat anzeigen (abstract)unplanned downtime decreasing from 600 to 300 min/week | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 300 min/week | Einfache Extraktion |
Beobachtungseinheiten
- Industrial cereal extrusion line · Extrudieren · Ausgangslage
- Industrial cereal extrusion line · Extrudieren · Nach der Intervention

