foratvise
Loslegen
Eingeschlossene Studie

Determining Mocaf Production Quantity Using Sugeno's Fuzzy Model: Analyzing Slicing Machine Effectiveness and Raw Material Forecasting in SMEs

Quelle öffnen

1Bibliografische Angaben

Autoren
Sesar Husen Santosa, Agung Prayudha Hidayat, Ridwan Siskandar Siskandar
Jahr
2025
Publikationsorgan
JURNAL TEKNIK INDUSTRI
Land
Indonesia
Segment
Obst- und Gemüseverarbeitung
Prozessfamilie
Mahlen, Extrahieren und Trennen
Studientyp
Einzelfallstudie
Extraktionsumfang
Volltext
Umfang
1 Werke · — Linien · 1 Maschinen
Beobachtungszeitraum
84 Tage
Datenerhebung
not_reported
Intervention
Umfeld laut Studie anzeigen
The Mocaf flour SME has three machines in the production process: a cassava slicing machine, a smoothing machine, and a flour filtering machine.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 14Geringes Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—cassava slicing machine
Wörtliches Zitat anzeigen (Results section, after Table 3)
Based on the results of the Availability, Performance, and Quality yield analysis, it was found that the OEE value of the cassava slicing machine was 0.71 (71%).
noneOEE71,0 %Beide Extraktionen übereinstimmend
—cassava slicing machine
Wörtliches Zitat anzeigen (Results section, Quality Yield calculation)
Qy = 0,99 (99%)
noneQualität99,0 %Beide Extraktionen übereinstimmend
—cassava slicing machine
Wörtliches Zitat anzeigen (Results section, Availability calculation)
Av = 0,91 (91%)
noneVerfügbarkeit91,0 %Beide Extraktionen übereinstimmend
—cassava slicing machine
Wörtliches Zitat anzeigen (Results section, Performance calculation)
Pf = 0,78 (78 %)
noneLeistung78,0 %Beide Extraktionen übereinstimmend
Planned Downtimecassava slicing machine
Wörtliches Zitat anzeigen (Table 1)
Total 17507,14 2880 180,00 237 1,32 1,98 2700 2463
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit180 MinutesEinfache Extraktion
Unplanned Downtimecassava slicing machine
Wörtliches Zitat anzeigen (Table 1)
Total 17507,14 2880 180,00 237 1,32 1,98 2700 2463
Anlagenausfall (Störungen)Verlustzeit237 MinutesEinfache Extraktion
—cassava slicing machine
Wörtliches Zitat anzeigen (Table 1, Page 5)
Loading Time = Production Time – Planned Dt = 2880 – 180 = 2700 Minutes
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit180 minEinfache Extraktion
—cassava slicing machine
Wörtliches Zitat anzeigen (Page 6)
Operating time decreased due to unplanned downtime of 237 minutes in 12 production periods.
Aus dem Bericht nicht klassifizierbarVerlustzeit237 minEinfache Extraktion

Beobachtungseinheiten

  • Cassava slicing machine · Schneiden, Aufschneiden und Entbeinen · Ausgangslage