Eingeschlossene Studie
Continuous Improvement Using the DMAIC Method to Reduce Technical Breakdown in a Conveyor Tilting Machine
1Bibliografische Angaben
- Autoren
- Andri Setio, Sunyoto, Sarbini
- Jahr
- 2026
- Publikationsorgan
- International Journal of Research and Innovation in Social Science
- Land
- Indonesia
- Segment
- Erfrischungsgetränke, abgefülltes Wasser und Säfte
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 2 Linien · 1 Maschinen
- Beobachtungszeitraum
- 365 Tage
- Datenerhebung
- maintenance_records
- Intervention
Umfeld laut Studie anzeigen
PT. ABC is a packaged-beverage company located in Pasuruan, East Java, Indonesia, established in 2012, with Teh Pucuk Harum (TPH) as its flagship product and a production capacity of up to 90,000 boxes per day.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 12Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
top-chain derailment without detectiontop chainWörtliches Zitat anzeigen (Section 4.3 Analyze / Figure 1)top-chain derailment without detection was dominant, with five incidents (41.67% of frequency) and a loss contribution of 317 minutes, or 77.32% of total loss, far exceeding other types of failure. | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 77,3 % | Beide Extraktionen übereinstimmend |
top-chain derailment without detectiontop chainWörtliches Zitat anzeigen (Section 4.3 Analyze / Figure 1)top-chain derailment without detection was dominant, with five incidents (41.67% of frequency) and a loss contribution of 317 minutes, or 77.32% of total loss, far exceeding other types of failure. | Anlagenausfall (Störungen) | Verlustzeit | 317 min | Beide Extraktionen übereinstimmend |
top-chain derailment without detectiontop chainWörtliches Zitat anzeigen (Section 4.3 Analyze / Figure 1)top-chain derailment without detection was dominant, with five incidents (41.67% of frequency) and a loss contribution of 317 minutes, or 77.32% of total loss, far exceeding other types of failure. | Anlagenausfall (Störungen) | Anteil an den Verlustereignissen | 41,7 % | Beide Extraktionen übereinstimmend |
—conveyor tilting machineWörtliches Zitat anzeigen (Table 6)Machine Availability 99.92% (8,753.17 ÷ 8,760) × 100% | none | Verfügbarkeit | 99,9 % | Beide Extraktionen übereinstimmend |
—conveyor tilting machineWörtliches Zitat anzeigen (Table 6)MTTR 34.17 minutes/incident 410 min ÷ 12 incidents | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 34,2 minutes/incident | Durch Schiedsentscheid |
—conveyor tilting machineWörtliches Zitat anzeigen (Section 4.5 Control)Total production loss decreased by 93.41% (from 410 to 27 minutes), MTBF increased by 148.38%, MTTR decreased by 60.49%, and Machine Availability rose from 99.92% to 99.99%. | Anlagenausfall (Störungen) | Verlustzeit | 27,0 min | Beide Extraktionen übereinstimmend |
—conveyor tilting machineWörtliches Zitat anzeigen (Section 4.5 Control)MTBF = total uptime (3,623.55 hours) ÷ 2 incidents = 1,811.78 hours/failure; MTTR = 27 minutes ÷ 2 incidents = 13.5 minutes/incident; and Machine Availability = (3,623.55 ÷ 3,624) × 100% = 99.99% | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 13,5 minutes/incident | Durch Schiedsentscheid |
—conveyor tilting machineWörtliches Zitat anzeigen (Section 4.5 Control)MTBF = total uptime (3,623.55 hours) ÷ 2 incidents = 1,811.78 hours/failure; MTTR = 27 minutes ÷ 2 incidents = 13.5 minutes/incident; and Machine Availability = (3,623.55 ÷ 3,624) × 100% = 99.99% | none | Verfügbarkeit | 100,0 % | Beide Extraktionen übereinstimmend |
—conveyor tilting machineWörtliches Zitat anzeigen (Section 4.5 Control)MTBF = total uptime (3,623.55 hours) ÷ 2 incidents = 1,811.78 hours/failure; MTTR = 27 minutes ÷ 2 incidents = 13.5 minutes/incident; and Machine Availability = (3,623.55 ÷ 3,624) × 100% = 99.99% | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 1.812 hours/failure | Durch Schiedsentscheid |
—conveyor tilting machineWörtliches Zitat anzeigen (Abstract)resulting in a total production loss of 410 minutes across 12 incidents during January–December 2025, mainly caused by the absence of an automatic detection system for top-chain derailment. | Anlagenausfall (Störungen) | Verlustzeit | 410 min | Einfache Extraktion |
—conveyor tilting machineWörtliches Zitat anzeigen (Table 6)Number of TB incidents 12 incidents Historical data, Jan–Dec 2025 | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 12,0 incidents | Einfache Extraktion |
—conveyor tilting machineWörtliches Zitat anzeigen (Table 6)MTBF 729.43 hours/failure 8,753.17 ÷ 12 incidents | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 729 hours/failure | Einfache Extraktion |
Top-chain derailmenttop chainWörtliches Zitat anzeigen (Table 5)Top-chain derailment (13 min downtime, Shift 3) Detection response < 1 ms via proximity sensor | Anlagenausfall (Störungen) | Verlustzeit | 13,0 min | Einfache Extraktion |
Structural damage to support railsupport railWörtliches Zitat anzeigen (Table 5)Structural damage to support rail (180 min loss) Downtime from structural damage < 30 minutes | Anlagenausfall (Störungen) | Verlustzeit | 180 min | Einfache Extraktion |
Tilting chain repairtilting chainWörtliches Zitat anzeigen (Table 5)Tilting chain repair (41 min MTTR) MTTR reduced through faster response time | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 41,0 min | Einfache Extraktion |
Guider-out tilting damageguiderWörtliches Zitat anzeigen (Table 5)Guider-out tilting damage (29 min) Guider service life monitored via checklist | Anlagenausfall (Störungen) | Verlustzeit | 29,0 min | Einfache Extraktion |
Combined tilting & top-chain failureWörtliches Zitat anzeigen (Table 5)Combined tilting & top-chain failure (100 min) Total production loss reduced from the 410-min baseline | Anlagenausfall (Störungen) | Verlustzeit | 100 min | Einfache Extraktion |
—conveyor tilting machineWörtliches Zitat anzeigen (Table 9)Number of TB incidents 12 incidents 2 incidents ↓ 83.33% | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 2,00 incidents | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.1 Define)far exceeding Line 1, which recorded only 132 minutes over the same period. | Anlagenausfall (Störungen) | Verlustzeit | 132 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Abstract and Measure phase, page 6)a DPMO of 83,333 | none | Fehlerquote | 83.333 DPMO | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Abstract and Measure phase, page 6)a Sigma Level of 2.88σ | none | Qualität | 2,88 σ | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Abstract and Measure phase, page 6)a process capability index (Cp) of 0.96 | none | Qualität | 0,960 index | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Abstract and Table 9, page 9)DPMO 83,333 33,333 ↓ 60% | none | Fehlerquote | 33.333 DPMO | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 9, page 9)Sigma Level 2.88 σ 3.33 σ ↑ 0.45 σ | none | Qualität | 3,33 σ | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 9, page 9)Capability Index (Cp) 0.96 (poor) 1.11 (good) ↑ 0.15 | none | Qualität | 1,11 index | Einfache Extraktion |
Beobachtungseinheiten
- Line 2 tilting machine · Sterilisieren (Autoklav, UHT) · Ausgangslage
- Line 2 tilting machine · Sterilisieren (Autoklav, UHT) · Nach der Intervention
- Line 1 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Line 2 Tilting Machine · Fördern und Puffern · Ausgangslage
- Line 2 Tilting Machine · Fördern und Puffern · Nach der Intervention

