foratvise
Comenzar
Estudio incluido

Aplicación de metodología SMED para reducir tiempos de cambio en formato de la línea de embotellado Grupo Bebidas Refrigerantes S.A.

Abrir fuente

1Ficha bibliográfica

Autores
Díaz Esquivel, Carlos Alberto
Año
2018
Publicación
renati
DOI
—
País
Peru
Segmento
Refrescos, agua embotellada y jugos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Solo resumen
Tamaño
1 plantas · 1 líneas · 1 máquinas
Periodo de observación
180 días
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
the purpose of reducing the time in change of format in the filler model H & K VF 72/14, of the bottling line L-822.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 8Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
format changefiller H & K VF 72/14
Ver cita textual (abstract)
reducing the time in change from 1.5 hours to 0.87 hours
Setups y ajustesDuración media del evento0.870 hAmbos extractores coincidieron
format changefiller H & K VF 72/14
Ver cita textual (abstract)
reducing the time in change from 1.5 hours to 0.87 hours
Setups y ajustesDuración media del evento1.50 hAmbos extractores coincidieron
—filler H & K VF 72/14
Ver cita textual (abstract)
comparing with the productivity in the months of January to June before the implementation of the SMED by an average of 95.44%
noneRendimiento95.4 %Un solo extractor
—filler H & K VF 72/14
Ver cita textual (abstract)
Significantly increase the productivity of the filler in the months of July to December by an average of 97.47%
noneRendimiento97.5 %Un solo extractor
—filler H&K VF 72/14
Ver cita textual (ABSTRACT)
productivity in the months of January to June before the implementation of the SMED by an average of 95.44%
noneOEE95.4 %Un solo extractor
format changefiller H&K VF 72/14
Ver cita textual (ABSTRACT)
reduction in the times of the format change up to 42.22%
Setups y ajustesProporción del tiempo perdido42.2 %Un solo extractor
format changefiller H&K VF 72/14
Ver cita textual (ABSTRACT)
When implementing the SMED methodology in the months of July to December, a time of 84.7 hours was increased
Setups y ajustesTiempo perdido84.7 hoursUn solo extractor
—filler H&K VF 72/14
Ver cita textual (ABSTRACT)
producing 2,541,000 bottles
noneCapacidad de producción2,541,000 bottlesUn solo extractor
—filler H&K VF 72/14
Ver cita textual (ABSTRACT)
productivity of the filler in the months of July to December by an average of 97.47%
noneOEE97.5 %Un solo extractor

Unidades de observación

  • Filler H&K VF 72/14 - Line L-822 · Llenado · Después de la intervención
  • Filler H&K VF 72/14 - Line L-822 · Llenado · Línea base
  • Bottling line L-822, filler H&K VF 72/14 · Llenado · Línea base
  • Bottling line L-822, filler H&K VF 72/14 · Llenado · Después de la intervención