Tiempo de cambio de formato / setup
En resumen
Aparece en cerca de 11 de cada 100 líneas estudiadas.
Cuando aparece, se lleva en promedio cerca del 66 % del tiempo perdido de la línea. La reportan 33 de los 127 estudios que podían observarla (evidencia sólida).
Qué pasa
Se pierde tiempo entre la última unidad buena de una corrida y la primera unidad buena de la siguiente mientras la línea se detiene o funciona fuera de producción para cambiar producto, formato, utillaje o receta, incluyendo limpieza, calentamiento y la rampa de reinicio tras un arranque en frío. La duración depende de la complejidad de los ajustes mecánicos, eléctricos y de proceso requeridos y de cuán estandarizado o manual sea el procedimiento de cambio.
Qué se hace
Aplicar la metodología SMED para separar las tareas de setup internas de las externas, estandarizar y preparar con anticipación herramientas, piezas y recetas, y usar dispositivos de cambio rápido o piezas de formato para reducir el ajuste manual. Capacitar a los operadores en secuencias estándar documentadas de cambio y monitorear la duración del cambio como indicador clave para impulsar la mejora continua.
Orientación práctica basada en conocimiento de ingeniería; no es una estimación estadística.
1Probabilidad y evidencia
- Probabilidad de presencia
- 11 % [6–17 %]
- Proporción esperada del tiempo perdido
- 7.0 % [3.7–11.6 %]
- Proporción del tiempo perdido cuando está presente
- 66 % [58–74 %]
- Estudios / unidades
- 127 / 161
- Grado de evidencia
- A
Grado A: 10 o más estudios y 10 o más líneas distintas, con un intervalo de credibilidad del 95 % de ancho menor a 0,20.
2Probabilidad por segmento
- Productos lácteos24 % [10–43 %]13 estudios
- Refrescos, agua embotellada y jugos11 % [5–20 %]26 estudios
- Cerveza, vino y destilados14 % [5–29 %]11 estudios
- Panadería y pastas11 % [4–21 %]24 estudios
- Carne, aves y pescado10 % [3–23 %]9 estudios
- Procesamiento de frutas y vegetales15 % [4–33 %]7 estudios
- Molienda de granos y oleaginosas8.8 % [2.2–21.7 %]6 estudios
- Azúcar y confitería16 % [5–31 %]9 estudios
- Snacks, café, té y otros alimentos11 % [3–26 %]5 estudios
- Alimento animal y para mascotas11 % [3–24 %]7 estudios
- Manufactura de alimentos (sin especificar o mixta)15 % [4–32 %]10 estudios
3Mecanismo, firma en SCADA y contramedida
Mecanismo
Guía de ingenieríaSe pierde tiempo entre la última unidad buena de una corrida y la primera unidad buena de la siguiente mientras la línea se detiene o funciona fuera de producción para cambiar producto, formato, utillaje o receta, incluyendo limpieza, calentamiento y la rampa de reinicio tras un arranque en frío. La duración depende de la complejidad de los ajustes mecánicos, eléctricos y de proceso requeridos y de cuán estandarizado o manual sea el procedimiento de cambio.
Cómo se ve en los datos de SCADA
Guía de ingenieríaIntervalos prolongados en estado de máquina no productivo o en modo manual/setup entre el último ciclo de un SKU y el primer ciclo del siguiente, delimitados por eventos de cambio de orden o receta, contadores de producción estancados y ausencia de alarmas de falla que lo distingan de un paro no planificado. Los eventos repetidos de cambio se correlacionan con las transiciones de código de producto o formato registradas en el MES.
Contramedida
Guía de ingenieríaAplicar la metodología SMED para separar las tareas de setup internas de las externas, estandarizar y preparar con anticipación herramientas, piezas y recetas, y usar dispositivos de cambio rápido o piezas de formato para reducir el ajuste manual. Capacitar a los operadores en secuencias estándar documentadas de cambio y monitorear la duración del cambio como indicador clave para impulsar la mejora continua.
4Fuentes
- Analisis Efektivitas Mesin pada Divisi Pengalengan Jamur Di PT XYZ Menggunakan Metode Overall Equipment Effectiveness (2019)Abrir fuenteProporción del tiempo planificado: 9.30 % · según el reporte: “Setup & Adjustment Losses”
Ver cita textual
Rata-Rata 0,099271 9,29814 30,74813 0,00000 0,00000 0,13414
- Analisis Efektivitas Mesin pada Divisi Pengalengan Jamur Di PT XYZ Menggunakan Metode Overall Equipment Effectiveness (2019)Abrir fuenteProporción del tiempo perdido: 23.1 % · según el reporte: “Setup & Adjustment Losses”
Ver cita textual
Dapat dilihat di grafik bahwa nilai losses terbesar ada pada idle & minor stoppages losses dan setup & adjustment losses yang mewakili 76,34% dan 23,08% dari total losses perusahaan, hal ini tentu saja harus diperbaiki.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Abrir fuenteTiempo perdido: 34.0 min · según el reporte: “cambio de formato”
Ver cita textual
el tiempo total empleado fue de 34 minutos 0 segundos, realizándose un total de 36 actividades, las actividades que se realizan respecto a esta máquina son principalmente del tipo Operación.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Abrir fuenteNúmero de eventos: 36.0 activities · según el reporte: “cambio de formato”
Ver cita textual
el tiempo total empleado fue de 34 minutos 0 segundos, realizándose un total de 36 actividades, las actividades que se realizan respecto a esta máquina son principalmente del tipo Operación.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Abrir fuenteTiempo perdido: 54.0 min · según el reporte: “cambio de formato”
Ver cita textual
El tiempo total empleado para la realización de todas las actividades que comprenden el cambio de formato fue de 54 minutos 0 segundos, realizándose un total de 65 actividades, siendo la máquina con la mayor cantidad de actividades realizadas en comparación con la Fogg, Karlville y Edos.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Abrir fuenteNúmero de eventos: 65.0 activities · según el reporte: “cambio de formato”
Ver cita textual
El tiempo total empleado para la realización de todas las actividades que comprenden el cambio de formato fue de 54 minutos 0 segundos, realizándose un total de 65 actividades, siendo la máquina con la mayor cantidad de actividades realizadas en comparación con la Fogg, Karlville y Edos.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Abrir fuenteTiempo perdido: 21.0 min · según el reporte: “cambio de formato”
Ver cita textual
El tiempo total propuesto para el cambio de formato se acortó en un 4,76%, de 21 a 20 minutos, respecto al de las videograbaciones.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Abrir fuenteNúmero de eventos: 37.0 activities · según el reporte: “cambio de formato”
Ver cita textual
en el cual se disminuyeron las actividades en gran medida, de 37 a 7, la mayoría operativa.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Abrir fuenteTiempo perdido: 20.0 min · según el reporte: “cambio de formato”
Ver cita textual
El tiempo total propuesto para el cambio de formato se acortó en un 4,76%, de 21 a 20 minutos, respecto al de las videograbaciones.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Abrir fuenteNúmero de eventos: 7.00 activities · según el reporte: “cambio de formato”
Ver cita textual
en el cual se disminuyeron las actividades en gran medida, de 37 a 7, la mayoría operativa.
- Optimizing beverage manufacturing: integrating lean manufacturing and machine learning to enhance efficiency and reduce waste (2025)Abrir fuenteTiempo perdido: 42.0 min · según el reporte: “Line changeover”
Ver cita textual
Line change time | Average | 42 | 16
- Optimizing beverage manufacturing: integrating lean manufacturing and machine learning to enhance efficiency and reduce waste (2025)Abrir fuenteTiempo perdido: 16.0 min · según el reporte: “Line changeover”
Ver cita textual
Line change time | Average | 42 | 16
- Enhancing operational efficiency in craft beer production: implementation of lean manufacturing and TPM methodologies in SMES (2025)Abrir fuenteTiempo perdido: 41.0 min · según el reporte: “Setup time”
Ver cita textual
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
- Enhancing operational efficiency in craft beer production: implementation of lean manufacturing and TPM methodologies in SMES (2025)Abrir fuenteTiempo perdido: 29.0 min · según el reporte: “Setup time”
Ver cita textual
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
- Investigation on a multiscale sustainable manufacturing approach to production changeover complexity reduction and its implementation through smart surfaces and process optimization (2022)Abrir fuenteProporción del tiempo perdido: 16.5 % · según el reporte: “Change Over”
Ver cita textual
Change Over 55 16.50%
- Investigation on a multiscale sustainable manufacturing approach to production changeover complexity reduction and its implementation through smart surfaces and process optimization (2022)Abrir fuenteTiempo perdido: 55.0 min · según el reporte: “Set up and Change Over”
Ver cita textual
Set up and Change Over 27 28 55
- Proporción del tiempo planificado: 20.0 % · según el reporte: “Tip dönüşüm süreleri”
Ver cita textual
Tip dönüşüm sürelerinin tüm üretim zamanının %20’sini oluşturduğu gözlemlenmiştir.
- Tiempo perdido: 300 dk · según el reporte: “Toplam Tip Dönüş Süresi”
Ver cita textual
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Tiempo perdido: 325 dk · según el reporte: “Toplam Tip Dönüş Süresi”
Ver cita textual
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Tiempo perdido: 120 dk · según el reporte: “Toplam Tip Dönüş Süresi”
Ver cita textual
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Tiempo perdido: 460 dk · según el reporte: “Toplam Tip Dönüş Süresi”
Ver cita textual
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Tiempo perdido: 400 dk · según el reporte: “Toplam Tip Dönüş Süresi”
Ver cita textual
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Tiempo perdido: 540 dk · según el reporte: “Toplam Tip Dönüş Süresi”
Ver cita textual
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Tiempo perdido: 1,230 dk · según el reporte: “Toplam tip dönüştürme süresi”
Ver cita textual
Toplam tip dönüştürme süresi 1230 dk
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 25.6 min · según el reporte: “Internal activities time (final)”
Ver cita textual
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 148 min · según el reporte: “Total production time of changeover activities”
Ver cita textual
147.54 15 23 63.22 84.32
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Abrir fuenteNúmero de eventos: 15.0 events · según el reporte: “Internal activities”
Ver cita textual
147.54 15 23 63.22 84.32
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Abrir fuenteNúmero de eventos: 23.0 events · según el reporte: “External activities”
Ver cita textual
147.54 15 23 63.22 84.32
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 63.2 min · según el reporte: “Internal activities time”
Ver cita textual
147.54 15 23 63.22 84.32
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 84.3 min · según el reporte: “External activities time”
Ver cita textual
147.54 15 23 63.22 84.32
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 106 min · según el reporte: “Final process time after SMED implementation”
Ver cita textual
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Abrir fuenteNúmero de eventos: 25.0 events · según el reporte: “External activities (final)”
Ver cita textual
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 80.1 min · según el reporte: “External activities time (final)”
Ver cita textual
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Número de eventos: 15.0 changeovers/month · según el reporte: “changeover”
Ver cita textual
Machines operating the line had, on average, 15 changeovers/month, each taking significant times.
- Número de eventos: 19.0 changeovers/month · según el reporte: “changeover”
Ver cita textual
The number of machines in lines 1, 2, 3 and 4/5 was respectively 5, 10, 9 and 12, while changeovers per month in the same lines were on average 19, 28, 22 and 35.
- Número de eventos: 28.0 changeovers/month · según el reporte: “changeover”
Ver cita textual
The number of machines in lines 1, 2, 3 and 4/5 was respectively 5, 10, 9 and 12, while changeovers per month in the same lines were on average 19, 28, 22 and 35.
- Número de eventos: 22.0 changeovers/month · según el reporte: “changeover”
Ver cita textual
The number of machines in lines 1, 2, 3 and 4/5 was respectively 5, 10, 9 and 12, while changeovers per month in the same lines were on average 19, 28, 22 and 35.
- Número de eventos: 35.0 changeovers/month · según el reporte: “changeover”
Ver cita textual
The number of machines in lines 1, 2, 3 and 4/5 was respectively 5, 10, 9 and 12, while changeovers per month in the same lines were on average 19, 28, 22 and 35.
- Proporción del tiempo perdido: 7.60 % · según el reporte: “SMED (changeover) time reduction”
Ver cita textual
Latest fine-tuning in 2012 decreased SMED time for 7.6% or 3473 minutes
- Proporción del tiempo perdido: 36.0 % · según el reporte: “Setup”
Ver cita textual
verificou-se que as paradas do equipamento Klockner representa 30% de todos estes desperdício e que 36 % estão relacionadas com set ups e 34% são relativas a outro problemas.
- Tiempo perdido: 2.00 min · según el reporte: “Separate necessary keys for setup”
Ver cita textual
1 Separar as chaves necessárias para setup 00:00:00 00:02:00 00:02:00 00:02:00 -
- Tiempo perdido: 2.00 min · según el reporte: “Fetch test bottles”
Ver cita textual
2 Buscar garrafas testes 00:02:00 00:04:00 00:02:00 00:02:00 -
- Tiempo perdido: 13.0 min · según el reporte: “Adjust flaps”
Ver cita textual
5 Ajuste das aletas 00:45:00 00:58:00 00:13:00 00:13:00 -
- Tiempo perdido: 18.0 min · según el reporte: “Adjust pneumatic classifier”
Ver cita textual
6 Ajuste no classificador pneumáti co 00:58:00 01:16:00 00:18:00 00:18:00 -
- Tiempo perdido: 6.00 min · según el reporte: “Adjust film reading sensor”
Ver cita textual
8 Ajuste no sensor de leitura do filme 01:23:00 01:29:00 00:06:00 00:06:00 -
- Tiempo perdido: 5.00 min · según el reporte: “Set pusher chain to zero point”
Ver cita textual
11 Colocar a cadeia empurradora no ponto zero 01:35:00 01:40:00 00:05:00 00:05:00 -
- Tiempo perdido: 2.00 min · según el reporte: “Disengage table regulator”
Ver cita textual
12 Desacoplar regulador da mesa 01:40:00 01:42:00 00:02:00 00:02:00 -
- Tiempo perdido: 6.00 min · según el reporte: “Set wrapping chain to zero point”
Ver cita textual
13 Colocar cadeia de envolvimento ponto zero 01:42:00 01:48:00 00:06:00 00:06:00 -
- Tiempo perdido: 2.00 min · según el reporte: “Get 250 ml dividers (verandas)”
Ver cita textual
14 Pegar varandas de 250 ml 01:48:00 01:50:00 00:02:00 00:02:00 -
- Tiempo perdido: 4.00 min · según el reporte: “Change dividers position”
Ver cita textual
15 Trocar posição de varandas 01:50:00 01:54:00 00:04:00 00:04:00 -
- Tiempo perdido: 10.0 min · según el reporte: “Get film for 250 ml”
Ver cita textual
16 Pegar filme para 250 ml 01:54:00 02:04:00 00:10:00 00:10:00 -
- Tiempo perdido: 4.00 min · según el reporte: “Change film from 2 liters to 250 ml”
Ver cita textual
17 Trocar filme de 2 litros para 250 ml 02:04:00 02:08:00 00:04:00 00:04:00 -
- Tiempo perdido: 4.00 min · según el reporte: “Test machine”
Ver cita textual
18 Testar máquina 02:08:00 02:12:00 00:04:00 00:04:00 -
- Tiempo perdido: 3.00 min · según el reporte: “Organize tools used in setup”
Ver cita textual
19 Organizar chaves usadas no set up 02:12:00 02:15:00 00:03:00 00:03:00 -
- Tiempo perdido: 3.00 min · según el reporte: “Adjust flaps”
Ver cita textual
4 Ajuste das aletas 00:07:00 00:10:00 00:03:00 00:03:00 -
- Tiempo perdido: 4.00 min · según el reporte: “Adjust pneumatic classifier”
Ver cita textual
5 Ajuste no classificador pneumático 00:10:00 00:14:00 00:04:00 00:04:00 -
- Tiempo perdido: 1.00 min · según el reporte: “Adjust film reading sensor”
Ver cita textual
7 Ajuste no sensor de leitura do filme 00:15:00 00:16:00 00:01:00 00:01:00 -
- Tiempo perdido: 2.00 min · según el reporte: “Set pusher chain to zero point”
Ver cita textual
9 Colocar a cadeia empurradora no ponto zero 00:17:00 00:19:00 00:02:00 00:02:00 -
- Tiempo perdido: 1.00 min · según el reporte: “Disengage wrapping table regulator”
Ver cita textual
10 Desacoplar regulador mesa de envolvi mento 00:19:00 00:20:00 00:01:00 00:01:00 -
- Tiempo perdido: 1.00 min · según el reporte: “Set wrapping chain to zero point”
Ver cita textual
11 Colocar cadeia envolvimento no ponto zero 00:20:00 00:21:00 00:01:00 00:01:00 -
- Tiempo perdido: 1.00 min · según el reporte: “Get 250 ml dividers (verandas)”
Ver cita textual
12 Pegar varandas de 250 ml 00:21:00 00:22:00 00:01:00 - 00:01:00
- Tiempo perdido: 1.00 min · según el reporte: “Change dividers position”
Ver cita textual
13 Trocar posição de varandas 00:22:00 00:23:00 00:01:00 00:01:00 -
- Tiempo perdido: 2.00 min · según el reporte: “Get film for 250 ml”
Ver cita textual
14 Pegar filme para 250 ml 00:23:00 00:25:00 00:02:00 - 00:02:00
- Tiempo perdido: 4.00 min · según el reporte: “Change film from 2 liters to 250 ml”
Ver cita textual
15 Trocar filme de 2 litros para 250 ml 00:25:00 00:29:00 00:04:00 00:04:00 -
- Tiempo perdido: 8.00 min · según el reporte: “Clean the equipment”
Ver cita textual
17 Limpeza do equipamento 00:32:00 00:40:00 00:08:00 00:08:00 -
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 992 menit · según el reporte: “Set up”
Ver cita textual
Juni 992 2.171 6.164
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 980 menit · según el reporte: “Set up”
Ver cita textual
Mei 980 6.341 4.452
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 1,599 menit · según el reporte: “Set up”
Ver cita textual
April 1.599 8.680 5.376
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 1,957 menit · según el reporte: “Set up”
Ver cita textual
Maret 1.957 14.278 1.707
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 2,051 menit · según el reporte: “Set up”
Ver cita textual
Februari 2.051 10.424 1.098
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 1,278 menit · según el reporte: “Set up”
Ver cita textual
Januari 1.278 13.731 929
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 986 menit · según el reporte: “Set up”
Ver cita textual
Desember 986 9.274 9.307
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 1,687 menit · según el reporte: “Set up”
Ver cita textual
Oktober 1.687 8.213 15.131
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 1,120 menit · según el reporte: “Set up”
Ver cita textual
Agustus 1.120 6.057 16.715
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 1,025 menit · según el reporte: “Set up”
Ver cita textual
Juli 1.025 8.963 14.174
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 1,768 menit · según el reporte: “Set up”
Ver cita textual
September 1.768 12.412 9.943
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Abrir fuenteTiempo perdido: 788 menit · según el reporte: “Set up”
Ver cita textual
November 788 12.512 9.670
- Tiempo perdido: 103 min · según el reporte: “Bottle size changeover”
Ver cita textual
Entre 2015 e 2017, a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula duravam em média 102,5 minutos, 119,4 minutos e 151,8 minutos respetivamente
- Tiempo perdido: 119 min · según el reporte: “Capsule type changeover”
Ver cita textual
Entre 2015 e 2017, a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula duravam em média 102,5 minutos, 119,4 minutos e 151,8 minutos respetivamente
- Tiempo perdido: 152 min · según el reporte: “Bottle size and capsule type changeover”
Ver cita textual
Entre 2015 e 2017, a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula duravam em média 102,5 minutos, 119,4 minutos e 151,8 minutos respetivamente
- Proporción del tiempo perdido: 23.8 % · según el reporte: “Bottle size changeover”
Ver cita textual
as mudanças que resultam na maior percentagem de tempo improdutivo são as mudanças de tara, de cápsula e de ambas em simultâneo, sem que haja mudança de cerveja, representando um peso percentual de 23,8%, 23,7% e 16,7% respetivamente
- Proporción del tiempo perdido: 23.7 % · según el reporte: “Capsule type changeover”
Ver cita textual
as mudanças que resultam na maior percentagem de tempo improdutivo são as mudanças de tara, de cápsula e de ambas em simultâneo, sem que haja mudança de cerveja, representando um peso percentual de 23,8%, 23,7% e 16,7% respetivamente
- Proporción del tiempo perdido: 16.7 % · según el reporte: “Bottle size and capsule type changeover”
Ver cita textual
as mudanças que resultam na maior percentagem de tempo improdutivo são as mudanças de tara, de cápsula e de ambas em simultâneo, sem que haja mudança de cerveja, representando um peso percentual de 23,8%, 23,7% e 16,7% respetivamente
- Tiempo perdido: 42.0 min · según el reporte: “Bottle size changeover”
Ver cita textual
Considera-se que a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula, após as melhorias desenvolvidas no projeto, passam a durar em média 42, 55 e 84 minutos (ver secção 4.6)
- Tiempo perdido: 55.0 min · según el reporte: “Capsule type changeover”
Ver cita textual
Considera-se que a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula, após as melhorias desenvolvidas no projeto, passam a durar em média 42, 55 e 84 minutos (ver secção 4.6)
- Tiempo perdido: 84.0 min · según el reporte: “Bottle size and capsule type changeover”
Ver cita textual
Considera-se que a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula, após as melhorias desenvolvidas no projeto, passam a durar em média 42, 55 e 84 minutos (ver secção 4.6)
- CHANGEOVER TIME REDUCTION THROUGH LEAN TOOL “SMED” – A CASE STUDY FROM FOOD SECTOR (2018)Abrir fuenteProporción del tiempo perdido: 83.0 % · según el reporte: “Internal activities”
Ver cita textual
Internal activities occupied 83% of the total time.
- CHANGEOVER TIME REDUCTION THROUGH LEAN TOOL “SMED” – A CASE STUDY FROM FOOD SECTOR (2018)Abrir fuenteProporción del tiempo perdido: 77.0 % · según el reporte: “Changeovers”
Ver cita textual
Changeovers on a particular selected line then account for a total of 77% of all planned stoppages on this line.
- CHANGEOVER TIME REDUCTION THROUGH LEAN TOOL “SMED” – A CASE STUDY FROM FOOD SECTOR (2018)Abrir fuenteProporción del tiempo perdido: 17.0 % · según el reporte: “External activities”
Ver cita textual
internal; 83% external; 17% breakdown; 6% Figure 9 Internal vs external activities. Source: own
- Perancangan Ulang Mesin Pengaduk Sari Pati dengan Metode Reverse Engineering(Studi Kasus: UKM Pembuat Mie Soun Cap “Burung Sriti” Tulung, Klaten) (2017)Abrir fuenteTiempo perdido: 7.00 min · según el reporte: “set up time”
Ver cita textual
The result of the old machine indicate the set up time consuming about 7 minutes
- Aplicación de metodología SMED para reducir tiempos de cambio en formato de la línea de embotellado Grupo Bebidas Refrigerantes S.A. (2018)Abrir fuenteDuración media del evento: 0.870 h · según el reporte: “format change”
Ver cita textual
reducing the time in change from 1.5 hours to 0.87 hours
- Aplicación de metodología SMED para reducir tiempos de cambio en formato de la línea de embotellado Grupo Bebidas Refrigerantes S.A. (2018)Abrir fuenteDuración media del evento: 1.50 h · según el reporte: “format change”
Ver cita textual
reducing the time in change from 1.5 hours to 0.87 hours
- Aplicación de metodología SMED para reducir tiempos de cambio en formato de la línea de embotellado Grupo Bebidas Refrigerantes S.A. (2018)Abrir fuenteProporción del tiempo perdido: 42.2 % · según el reporte: “format change”
Ver cita textual
reduction in the times of the format change up to 42.22%
- Aplicación de metodología SMED para reducir tiempos de cambio en formato de la línea de embotellado Grupo Bebidas Refrigerantes S.A. (2018)Abrir fuenteTiempo perdido: 84.7 hours · según el reporte: “format change”
Ver cita textual
When implementing the SMED methodology in the months of July to December, a time of 84.7 hours was increased
- Implantación de Herramientas Industriales para la Optimización del Proceso Industrial Lácteo-Fermentado (2019)Abrir fuenteTiempo perdido: 16.1 Ton · según el reporte: “Cambio de Sabor”
Ver cita textual
reducir de 22.9 a 16.1 toneladas un 30.2% por las causas de cambios de sabor, plásticos equivocados y falta de material en línea
- Implantación de Herramientas Industriales para la Optimización del Proceso Industrial Lácteo-Fermentado (2019)Abrir fuenteTiempo perdido: 22.9 Ton · según el reporte: “Cambio de Sabor”
Ver cita textual
reducir de 22.9 a 16.1 toneladas un 30.2% por las causas de cambios de sabor, plásticos equivocados y falta de material en línea
- Proporción del tiempo planificado: 28.0 % · según el reporte: “changeovers”
Ver cita textual
Changeovers consumed 536 hours (28%), while machine breakdowns totalled 485 hours (25%).
- Tiempo perdido: 536 h · según el reporte: “changeovers”
Ver cita textual
Changeovers consumed 536 hours (28%), while machine breakdowns totalled 485 hours (25%).
- Duración media del evento: 66.1 min · según el reporte: “Product Exchange (Refrigerant)”
Ver cita textual
Product Exchange (Refrigerant) 66.1 27.0 59.1
- Duración media del evento: 19.7 min · según el reporte: “Product Exchange (Beer)”
Ver cita textual
Product Exchange (Beer) 19.7 6.0 69.5
- Duración media del evento: 89.3 min · según el reporte: “Format Exchange (Hs Mp For P12p)”
Ver cita textual
Format Exchange (Hs Mp For P12p) 89.3 35.9 59.8
- Duración media del evento: 27.0 min · según el reporte: “Product Exchange (Refrigerant)”
Ver cita textual
Product Exchange (Refrigerant) 66.1 27.0 59.1
- Duración media del evento: 6.00 min · según el reporte: “Product Exchange (Beer)”
Ver cita textual
Product Exchange (Beer) 19.7 6.0 69.5
- Duración media del evento: 35.9 min · según el reporte: “Format Exchange (Hs Mp For P12p)”
Ver cita textual
Format Exchange (Hs Mp For P12p) 89.3 35.9 59.8
- Analisis Efektivitas Mesin pada Divisi Pengalengan Jamur Di PT. Suryajaya Abadiperkasa Menggunakan Metode Overall Equipment Effectiveness (2020)Abrir fuenteProporción del tiempo perdido: 9.30 % · según el reporte: “Setup & Adjustment Losses”
Ver cita textual
Rata-Rata 0,099271 9,29814 30,74813 0,00000 0,00000 0,13414
- Analisis Efektivitas Mesin pada Divisi Pengalengan Jamur Di PT. Suryajaya Abadiperkasa Menggunakan Metode Overall Equipment Effectiveness (2020)Abrir fuenteProporción del tiempo perdido: 23.1 % · según el reporte: “Setup & Adjustment Losses”
Ver cita textual
nilai losses terbesar ada pada idle & minor stoppages losses dan setup & adjustment losses yang mewakili 76,34% dan 23,08% dari total losses perusahaan
- Analisis Total Productive Maintenance Mesin Wrapping Line 4 Menggunkan Overall Equipment Effectiveness dan Six Big Losses di PT XY, Cirebon - Jawa Barat (2020)Abrir fuenteProporción del tiempo perdido: 0 % · según el reporte: “Setup and Adjustment Losses”
Ver cita textual
Setup and Adjustment Losses 0% 0% 100%
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Abrir fuenteTiempo perdido: 1,797 min · según el reporte: “Miscellaneous activities”
Ver cita textual
Miscellaneous activities 1797 1.71 100.00
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Abrir fuenteProporción del tiempo perdido: 1.71 % · según el reporte: “Miscellaneous activities”
Ver cita textual
Miscellaneous activities 1797 1.71 100.00
- Duración media del evento: 156 min · según el reporte: “setup operation”
Ver cita textual
Before the intervention, the time to conclude a setup operation was approximately 156 minutes. After the intervention, it was reduced to approximately 104 minutes.
- Duración media del evento: 104 min · según el reporte: “setup operation”
Ver cita textual
Before the intervention, the time to conclude a setup operation was approximately 156 minutes. After the intervention, it was reduced to approximately 104 minutes.
- Duración media del evento: 45.0 s · según el reporte: “Changeover for new batch”
Ver cita textual
The changeover time reduced from 94 second to 45 second per changeover.
- Número de eventos: 15.0 changeover/Month · según el reporte: “Changeover for new batch”
Ver cita textual
Number of changeover per month = 15 changeover/Month.
- Duración media del evento: 94.0 min · según el reporte: “Changeover for new batch”
Ver cita textual
Changeover time is calculated with 94 min.
- Tiempo perdido: 1,410 Minutes · según el reporte: “Changeover for new batch”
Ver cita textual
Changeover for new batch 1410 Waiting
- Tiempo perdido: 45.0 ton · según el reporte: “Changeover for new batch”
Ver cita textual
Average waste Per Month (Ton/Month) 45
- Peningkatan Overall Equipment Effectiveness (OEE) dengan Pendekatan Total Productive Maintenance (TPM) di Line X PT Kraft Ultrajaya Indonesia (2023)Abrir fuenteProporción del tiempo perdido: 5.00 % · según el reporte: “Setup and Adjustment”
Ver cita textual
the loss factors that affect the OEE line X value are Idling and Minor Stoppage with a percentage of 8%, Setup and Adjustment with a percentage of 5%, Defect Amount with a percentage of 4%.
- Application of Lean-Total Productive Maintenance Tools to Reduce Setup Times and Machine Stoppages on the Molding Line of an SME in the Food Industry (2023)Abrir fuenteTiempo perdido: 254 min · según el reporte: “Duration of internal activities”
Ver cita textual
From the data collection of the total duration of mold change times, a total of 280 minutes on average was obtained, and the times of internal activities, 254 min, and external activities, 26 min.
- Application of Lean-Total Productive Maintenance Tools to Reduce Setup Times and Machine Stoppages on the Molding Line of an SME in the Food Industry (2023)Abrir fuenteTiempo perdido: 26.0 min · según el reporte: “Duration of external activities”
Ver cita textual
From the data collection of the total duration of mold change times, a total of 280 minutes on average was obtained, and the times of internal activities, 254 min, and external activities, 26 min.
- Application of Lean-Total Productive Maintenance Tools to Reduce Setup Times and Machine Stoppages on the Molding Line of an SME in the Food Industry (2023)Abrir fuenteDuración media del evento: 280 min · según el reporte: “mold change”
Ver cita textual
From the data collection of the total duration of mold change times, a total of 280 minutes on average was obtained
- Application of Lean-Total Productive Maintenance Tools to Reduce Setup Times and Machine Stoppages on the Molding Line of an SME in the Food Industry (2023)Abrir fuenteDuración media del evento: 254 min · según el reporte: “internal activities”
Ver cita textual
the times of internal activities, 254 min, and external activities, 26 min
- Application of Lean-Total Productive Maintenance Tools to Reduce Setup Times and Machine Stoppages on the Molding Line of an SME in the Food Industry (2023)Abrir fuenteDuración media del evento: 26.0 min · según el reporte: “external activities”
Ver cita textual
the times of internal activities, 254 min, and external activities, 26 min
- Analisis Pengukuran Nilai Overall Equipment Effectiveness (OEE) Pada Mesin Rice Milling Unit (RMU) di PT. FSTJ (2023)Abrir fuenteProporción del tiempo planificado: 2.87 % · según el reporte: “Setup”
Ver cita textual
Jika kita lihat total waktu Preventive Maintenance (PM) selama 1.905 menit terhadap waktu operasional yang 65.880 menit atau 2,89% dari waktu operasional dan waktu setup 1,890 menit atau 2,87% dari waktu operasional
- Analisis Pengukuran Nilai Overall Equipment Effectiveness (OEE) Pada Mesin Rice Milling Unit (RMU) di PT. FSTJ (2023)Abrir fuenteTiempo perdido: 1,890 min · según el reporte: “Setup”
Ver cita textual
Selama rentang waktu tersebut waktu operasional adalah 65.880 menit, preventive maintenance 1.905 menit, setup 1.890 menit dan breakdown 960 menit , maka persen availabilitynya adalah
- Enhancing sustainability in manufacturing: A case study on reducing changeover time through single minute exchange of dies and risk analysis (2024)Abrir fuenteProporción del tiempo perdido: 35.5 % · según el reporte: “changeover”
Ver cita textual
At stations A and B, the results of a post-SMED time analysis showed a reduction in changeover time of 35.54% and 49.94%, respectively.
- Enhancing sustainability in manufacturing: A case study on reducing changeover time through single minute exchange of dies and risk analysis (2024)Abrir fuenteProporción del tiempo perdido: 49.9 % · según el reporte: “changeover”
Ver cita textual
At stations A and B, the results of a post-SMED time analysis showed a reduction in changeover time of 35.54% and 49.94%, respectively.
- Proporción del tiempo planificado: 0 % · según el reporte: “Setup and adjustment losses”
Ver cita textual
𝑆𝑒𝑡𝑢𝑝 𝑎𝑛𝑑 𝑎𝑑𝑗𝑢𝑠𝑚𝑒𝑛𝑡 𝑙𝑜𝑠𝑠𝑒𝑠= 0 %
- Mejora de la Eficiencia General de los Equipos (EGE) en la etapa de prensado: Un estudio de caso en la industria de harina de pescado (2024)Abrir fuenteTiempo perdido: 112 min · según el reporte: “cambio de formato”
Ver cita textual
La duración promedio de un cambio es de 111,9 minutos, lo que representa aproximadamente el 7.79% del tiempo total de producción disponible en un día y puede ocurrir diariamente.
- Mejora de la Eficiencia General de los Equipos (EGE) en la etapa de prensado: Un estudio de caso en la industria de harina de pescado (2024)Abrir fuenteProporción del tiempo planificado: 7.79 % · según el reporte: “cambio de formato”
Ver cita textual
La duración promedio de un cambio es de 111,9 minutos, lo que representa aproximadamente el 7.79% del tiempo total de producción disponible en un día y puede ocurrir diariamente.
- Optimizing Productivity in the Animal Feed Industry: A Lean Approach for Enhanced Efficiency and Quality Assurance (2024)Abrir fuenteTiempo perdido: 525 seconds · según el reporte: “Line preparation time (changeover)”
Ver cita textual
Line preparation time (seconds) SMED 524.92 140 140.36 -73%
- Optimizing Productivity in the Animal Feed Industry: A Lean Approach for Enhanced Efficiency and Quality Assurance (2024)Abrir fuenteTiempo perdido: 140 seconds · según el reporte: “Line preparation time (changeover)”
Ver cita textual
Line preparation time (seconds) SMED 524.92 140 140.36 -73%
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteNúmero de eventos: 15.0 events · según el reporte: “Internal activities”
Ver cita textual
147.54 15 23 63.22 84.32
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteNúmero de eventos: 23.0 events · según el reporte: “External activities”
Ver cita textual
147.54 15 23 63.22 84.32
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 63.2 min · según el reporte: “Internal activities”
Ver cita textual
147.54 15 23 63.22 84.32
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 84.3 min · según el reporte: “External activities”
Ver cita textual
147.54 15 23 63.22 84.32
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteNúmero de eventos: 9.00 events · según el reporte: “Internal activities”
Ver cita textual
138.14 9 29 40.72 97.42
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteNúmero de eventos: 29.0 events · según el reporte: “External activities”
Ver cita textual
138.14 9 29 40.72 97.42
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 40.7 min · según el reporte: “Internal activities”
Ver cita textual
138.14 9 29 40.72 97.42
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 97.4 min · según el reporte: “External activities”
Ver cita textual
138.14 9 29 40.72 97.42
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteNúmero de eventos: 25.0 events · según el reporte: “External activities”
Ver cita textual
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 25.6 min · según el reporte: “Internal activities”
Ver cita textual
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Abrir fuenteTiempo perdido: 80.1 min · según el reporte: “External activities”
Ver cita textual
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Enhancing Operational Efficiency in Craft Beer Production: Implementation of Lean Manufacturing and TPM Methodologies in SMEs (2024)Abrir fuenteDuración media del evento: 41.0 min · según el reporte: “setup time”
Ver cita textual
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
- Enhancing Operational Efficiency in Craft Beer Production: Implementation of Lean Manufacturing and TPM Methodologies in SMEs (2024)Abrir fuenteDuración media del evento: 29.0 min · según el reporte: “setup time”
Ver cita textual
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
- The implementation of an integrated Lean Management-HACCP model: application in the food industry in Casablanca,Morocco (2025)Abrir fuenteDuración media del evento: 20.0 min · según el reporte: “series changeover”
Ver cita textual
The series changeover time is 20 min .
- The implementation of an integrated Lean Management-HACCP model: application in the food industry in Casablanca,Morocco (2025)Abrir fuenteDuración media del evento: 10.0 min · según el reporte: “series changeover”
Ver cita textual
Series changeover time reduced from 20 min to 10 min
- The implementation of an integrated Lean Management-HACCP model: application in the food industry in Casablanca,Morocco (2025)Abrir fuenteTiempo perdido: 20.0 min · según el reporte: “series changeover”
Ver cita textual
The series changeover time is 20 min.
- A Lean Manufacturing Case Study: Enhancing Efficiency and Reducing Waste in Latin American Food Production (2024)Abrir fuenteProporción del tiempo perdido: 13.5 % · según el reporte: “product fragility”
Ver cita textual
At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%).
- Proporción del tiempo perdido: 8.90 % · según el reporte: “size changeovers”
Ver cita textual
Specifically,label changeovers account for a 16% loss,followed closely by CIP processes at 15% and size changeovers at 8.9%.
- Proporción del tiempo perdido: 40.0 % · según el reporte: “changeovers”
Ver cita textual
A notable finding is that changeovers contribute to 40% of the total losses,emphasising the impact of equipment and process adjustments on operational performance.
- Proporción del tiempo perdido: 16.0 % · según el reporte: “label changeovers”
Ver cita textual
Specifically,label changeovers account for a 16% loss,followed closely by CIP processes at 15% and size changeovers at 8.9%.
- Número de eventos: 7,121 events · según el reporte: “changeovers during liquid filling operations (2017)”
Ver cita textual
Starting from 7121 changeovers in 2017,there was a steady annual increase,culminating in 15 388 changeovers projected for 2023.
- Número de eventos: 15,388 events · según el reporte: “changeovers during liquid filling operations (2023, projected)”
Ver cita textual
Starting from 7121 changeovers in 2017,there was a steady annual increase,culminating in 15 388 changeovers projected for 2023.
- Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study (2025)Abrir fuenteDuración media del evento: 41.0 min · según el reporte: “setup time”
Ver cita textual
Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency.
- Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study (2025)Abrir fuenteProporción del tiempo perdido: 19.8 % · según el reporte: “extended equipment setup times”
Ver cita textual
Lastly, process stoppages due to machinery were the most significant factor, with an impact of 46.85%, stemming from extended equipment setup times, which represented 19.84%, suggesting the implementation of the SMED methodology to reduce these delays.
- Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study (2025)Abrir fuenteDuración media del evento: 29.0 min · según el reporte: “setup time”
Ver cita textual
Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency.
- Performance Improvement Model Integrating Lean and Internet of things: AFoodProductionCase (2024)Abrir fuenteTiempo perdido: 35.0 % · según el reporte: “setup time”
Ver cita textual
a 35% decrease in setup time
- Lean Manufacturing: effective tools to optimize dairy beverage production. Evidence based on a statistical analysis. (2025)Abrir fuenteDuración media del evento: 42.6 min · según el reporte: “Shift changeover time without Kanban”
Ver cita textual
Tiempo de cambio sin KANBAN (min) 42,62 8,15 19 %
- Lean Manufacturing: effective tools to optimize dairy beverage production. Evidence based on a statistical analysis. (2025)Abrir fuenteDuración media del evento: 12.4 min · según el reporte: “Shift changeover time with Kanban”
Ver cita textual
Tiempo de cambio con KANBAN (min) 12,43 1,36 11 %
- Aggregate Analysis of Packaging Machine Effectiveness Using the OEE Method at PT. XYZ (2025)Abrir fuenteProporción del tiempo perdido: 6.00 % · según el reporte: “Setup and Adjusments Losses”
Ver cita textual
Setup and Adjusments Losses 2.425 40.410 6% 100%
- Aggregate Analysis of Packaging Machine Effectiveness Using the OEE Method at PT. XYZ (2025)Abrir fuenteTiempo perdido: 2,425 Minutes · según el reporte: “Setup and Adjusments Losses”
Ver cita textual
Setup and Adjusments Losses 2.425 40.410 6% 100%
- Tiempo perdido: 140 min · según el reporte: “breaks, reference change”
Ver cita textual
-Planned downtimes: 140 minutes, breaks, reference change, …
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Abrir fuenteNúmero de eventos: 731 events · según el reporte: “Elevados tiempos de setup”
Ver cita textual
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Abrir fuenteTiempo perdido: 22,606 min · según el reporte: “Elevados tiempos de setup”
Ver cita textual
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Abrir fuenteNúmero de eventos: 408 events · según el reporte: “Elevados tiempos de setup”
Ver cita textual
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Abrir fuenteDuración media del evento: 55.4 min · según el reporte: “Elevados tiempos de setup”
Ver cita textual
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Abrir fuenteTiempo perdido: 52,802 min · según el reporte: “Elevados tiempos de setup”
Ver cita textual
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Abrir fuenteDuración media del evento: 72.2 min · según el reporte: “Elevados tiempos de setup”
Ver cita textual
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Abrir fuenteTiempo perdido: 0 min · según el reporte: “Cambio de Programación”
Ver cita textual
Cambio de Programación 0 0.00% S/ -
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Abrir fuenteProporción del tiempo perdido: 185 % · según el reporte: “Elevados tiempos de setup”
Ver cita textual
Elevados tiempos de setup 52,802 184.900% S/2,375,887.99
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Abrir fuenteProporción del tiempo perdido: 23.3 % · según el reporte: “cambios de formato”
Ver cita textual
los motivos son las averías / reparaciones, reprocesos, cambios de formato y otros donde estas representan el 41.1%, 35.7% y 23.3% respectivamente
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Abrir fuenteDuración media del evento: 26.0 min · según el reporte: “cambio de formato”
Ver cita textual
La variación del tiempo del Set – up a lo largo del año es en promedio de 26 minutos siendo el objetivo de 19 minutos
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Abrir fuenteNúmero de eventos: 278 events · según el reporte: “cambio de formato”
Ver cita textual
con respecto a las 278 paradas de cambio de formato hace una demora anual de 1946 minutos
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Abrir fuenteProporción del tiempo planificado: 4.24 % · según el reporte: “Cambios de formato”
Ver cita textual
Cambios de formato 4,24%
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Abrir fuenteDuración media del evento: 19.5 min · según el reporte: “cambio de formato”
Ver cita textual
Tiempo de Set Up 26 min 19,5 min 19,00 min
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Abrir fuenteProporción del tiempo planificado: 1.50 % · según el reporte: “Cambios de formato”
Ver cita textual
Cambios de formato 1,50% REDUCIDO
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Abrir fuenteDuración media del evento: 19.5 min · según el reporte: “cambio de formato”
Ver cita textual
donde el promedio del cambio de formato es de 19.53 minutos
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Abrir fuenteTiempo perdido: 26.0 min · según el reporte: “Cambio de formato”
Ver cita textual
La variación del tiempo del Set – up a lo largo del año es en promedio de 26 minutos
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Abrir fuenteTiempo perdido: 19.5 min · según el reporte: “Cambio de formato”
Ver cita textual
Tiempo de Set Up 26 min → 19,5 min
- Proporción del tiempo perdido: 42.0 % · según el reporte: “setup and adjustment loss”
Ver cita textual
The Six Big Losses analysis showed that the largest losses came from setup and adjustment losses, accounting for 42%.
- Proporción del tiempo perdido: 42.0 % · según el reporte: “setup and adjustment loss”
Ver cita textual
The Six Big Losses analysis showed that the largest losses came from setup and adjustment losses, accounting for 42%
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Abrir fuenteProporción del tiempo perdido: 39.9 % · según el reporte: “Demoras por cambios de Formato”
Ver cita textual
Demoras por cambios de Formato 9262.27 39.85% 39.85%
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Abrir fuenteTiempo perdido: 9,262 min · según el reporte: “Demoras por cambios de Formato”
Ver cita textual
Demoras por cambios de Formato 9262.27 39.85% 39.85%
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Abrir fuenteDuración media del evento: 3.20 h · según el reporte: “cambio de producto”
Ver cita textual
Setup inicial (horas) 3.20 3.20 3.20 3.20 3.20 3.20
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Abrir fuenteDuración media del evento: 0.630 h · según el reporte: “cambio de presentación”
Ver cita textual
Setup inicial (horas) 0.63 0.63 0.63 0.63 0.63 0.63
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Abrir fuenteNúmero de eventos: 52.0 events/year · según el reporte: “cambio de producto”
Ver cita textual
Cambio de producto / año 52 55 57 60 63 66
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Abrir fuenteNúmero de eventos: 208 events/year · según el reporte: “cambio de presentación”
Ver cita textual
Cambio de presentación / año 208 218 229 241 253 265
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Abrir fuenteDuración media del evento: 1.99 h · según el reporte: “cambio de producto”
Ver cita textual
Tiempo setup logrado (horas) 1.99 1.99 1.92 1.92 1.92 1.92
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Abrir fuenteDuración media del evento: 0.440 h · según el reporte: “cambio de presentación”
Ver cita textual
Tiempo setup logrado (horas) 0.44 0.44 0.38 0.38 0.38 0.38
- Productivity Improvement Through the Application of Lean Six Sigma Tools in a Non-Alcoholic Beverage Company (2025)Abrir fuenteTiempo perdido: 16,800 min/year · según el reporte: “format changeover (Set Up)”
Ver cita textual
A total of 16,800 minutes per year associated with format changeover (Set Up) were identified, equivalent to 10.45% of productive time.
- Productivity Improvement Through the Application of Lean Six Sigma Tools in a Non-Alcoholic Beverage Company (2025)Abrir fuenteProporción del tiempo planificado: 10.5 % · según el reporte: “format changeover (Set Up)”
Ver cita textual
A total of 16,800 minutes per year associated with format changeover (Set Up) were identified, equivalent to 10.45% of productive time.
- Reducing Changeover Time Through SMED Methodology: A Review and Case Application in Beverage Bottling (2026)Abrir fuenteTiempo perdido: 28.0 min · según el reporte: “product changeover”
Ver cita textual
The intervention reduced average changeover time from 40 minutes to approximately 28 minutes - a 30% reduction
- Reducing Changeover Time Through SMED Methodology: A Review and Case Application in Beverage Bottling (2026)Abrir fuenteTiempo perdido: 40.0 min · según el reporte: “product changeover”
Ver cita textual
The intervention reduced average changeover time from 40 minutes to approximately 28 minutes - a 30% reduction
- Impact evaluation of operator training on the understanding of performance indicators (2025)Abrir fuenteDuración media del evento: 9.00 min · según el reporte: “setup time”
Ver cita textual
a 16.7% reduction in average setup time was observed (from 10.8 to 9.0 minutes)
- Impact evaluation of operator training on the understanding of performance indicators (2025)Abrir fuenteDuración media del evento: 10.8 min · según el reporte: “setup time”
Ver cita textual
a 16.7% reduction in average setup time was observed (from 10.8 to 9.0 minutes)
- Tiempo perdido: 360 min · según el reporte: “setup time”
Ver cita textual
The objective is to achieve a significant reduction in setup time, from 360 to 240 minutes, representing a decrease of approximately 33.33%.
- Proporción del tiempo perdido: 4.10 % · según el reporte: “setup time”
Ver cita textual
reducing the impact on production stoppages from 4.1% to 3%, as well as practical and applicable recommendations for managers and professionals in the chocolate industry.
- Tiempo perdido: 240 min · según el reporte: “setup time”
Ver cita textual
The objective is to achieve a significant reduction in setup time, from 360 to 240 minutes, representing a decrease of approximately 33.33%.
- Proporción del tiempo perdido: 3.00 % · según el reporte: “setup time”
Ver cita textual
reducing the impact on production stoppages from 4.1% to 3%, as well as practical and applicable recommendations for managers and professionals in the chocolate industry.
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Abrir fuenteDuración media del evento: 24.9 min · según el reporte: “Changeover (SKU average)”
Ver cita textual
1 - 5 24.91 16.66 33.1%
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Abrir fuenteDuración media del evento: 16.7 min · según el reporte: “Changeover (SKU average)”
Ver cita textual
1 - 5 24.91 16.66 33.1%
- Waste Management and Operational Efficiency Improvement in Cake and Pastry Factory Through Adapting DMAIC Methodology (2026)Abrir fuenteProporción del tiempo planificado: 9.77 % · según el reporte: “changeover time”
Ver cita textual
Changeover activities during January 2025 consumed 66.63 hours, which accounted for 9.77% of total production time, a relatively high percentage attributed to the product variety.
- Waste Management and Operational Efficiency Improvement in Cake and Pastry Factory Through Adapting DMAIC Methodology (2026)Abrir fuenteTiempo perdido: 66.6 h · según el reporte: “changeover time”
Ver cita textual
Changeover activities during January 2025 consumed 66.63 hours, which accounted for 9.77% of total production time, a relatively high percentage attributed to the product variety.
- Analisis Overall Equipment Effectiveness dan Six Big Losses pada Mesin Packaging Makanan di PT XYZ (2026)Abrir fuenteProporción del tiempo perdido: 11.8 % · según el reporte: “Setup and Adjustment Losses”
Ver cita textual
Kegagalan karena Setup and Adjustment Losses 31,20 11,82 Sedang
- Analisis Overall Equipment Effectiveness dan Six Big Losses pada Mesin Packaging Makanan di PT XYZ (2026)Abrir fuenteTiempo perdido: 31.2 Jam · según el reporte: “Setup and Adjustment Losses”
Ver cita textual
Kegagalan karena Setup and Adjustment Losses 31,20 11,82 Sedang
- Improvement proposal to increase machine availability in yogurt packaging by applying TPM tools autonomous, planned and SMED maintenance in a food industry company (2026)Abrir fuenteTiempo perdido: 90.0 min · según el reporte: “tiempo de cambio de formato”
Ver cita textual
el tiempo de cambio de formato disminuyó de 90 a 55 minutos (-38.89%) mediante la aplicación de SMED
- Improvement proposal to increase machine availability in yogurt packaging by applying TPM tools autonomous, planned and SMED maintenance in a food industry company (2026)Abrir fuenteDuración media del evento: 90.0 min · según el reporte: “format change”
Ver cita textual
el tiempo de cambio de formato disminuyó de 90 a 55 minutos
- Proposal for improving production efficiency in a food sector company, using SMED, Planned Maintenance and Poka-Yoke (2026)Abrir fuenteProporción del tiempo perdido: 17.4 % · según el reporte: “high setup times”
Ver cita textual
Esta situación fue originada por cuatro causas raíz: averías en equipos (35.41%), elevados tiempos de setup (17.38%), producto final golpeado (32.69%) y etiquetado incorrecto (14.52%)
- Proposal for improving production efficiency in a food sector company, using SMED, Planned Maintenance and Poka-Yoke (2026)Abrir fuenteProporción del tiempo perdido: 32.7 % · según el reporte: “damaged final product”
Ver cita textual
Esta situación fue originada por cuatro causas raíz: averías en equipos (35.41%), elevados tiempos de setup (17.38%), producto final golpeado (32.69%) y etiquetado incorrecto (14.52%)
- Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines (2026)Abrir fuenteProporción del tiempo planificado: 7.20 % · según el reporte: “Changeover Time (COT) and Ramp-Up Time (RUT)”
Ver cita textual
Although breakdown and malfunction losses (18.04%) are greater in aggregate than changeover and ramp-up losses (≈7.2%), they are not the focus of this study.
- Duración media del evento: 136 min · según el reporte: “cambio de formato (tiempo por ciclo)”
Ver cita textual
reduciendo, en promedio, los tiempos de parada rutinarias de 136 min por ciclo del proceso de llenado en el pretest a 21 min después de la implementación
- Duración media del evento: 22.0 min · según el reporte: “tiempo de cambio de setup (gráfica de control)”
Ver cita textual
El tiempo promedio de cambio de setup se estabilizó en un valor central de 21.988, manteniéndose alejado de los límites de control superior (36.056) e inferior (7.921).
- Tiempo perdido: 3,341 min · según el reporte: “cambio de formato”
Ver cita textual
La mejora buscó reducir las paradas asociados con los 59 cambios de formato en la presentación de 3,030 ml que totalizó 3,341 minutos el año 2023 equivalentes al 46.91% del porcentaje total de paradas
- Proporción del tiempo perdido: 46.9 % · según el reporte: “cambio de formato”
Ver cita textual
La mejora buscó reducir las paradas asociados con los 59 cambios de formato en la presentación de 3,030 ml que totalizó 3,341 minutos el año 2023 equivalentes al 46.91% del porcentaje total de paradas
- Número de eventos: 59.0 events · según el reporte: “cambio de formato”
Ver cita textual
La mejora buscó reducir las paradas asociados con los 59 cambios de formato en la presentación de 3,030 ml que totalizó 3,341 minutos el año 2023
- Duración media del evento: 64.0 min · según el reporte: “cambio de formato (llenadora)”
Ver cita textual
La toma de tiempos identificó a la llenadora como el equipo cuyo cambio de formato tomaba en promedio 64 minutos siendo el equipo crítico en la línea de producción
- Duración media del evento: 21.0 min · según el reporte: “cambio de formato (tiempo por ciclo)”
Ver cita textual
reduciendo, en promedio, los tiempos de parada rutinarias de 136 min por ciclo del proceso de llenado en el pretest a 21 min después de la implementación
- Proporción del tiempo planificado: 9.06 % · según el reporte: “cambios de formato”
Ver cita textual
los estimados porcentuales de tiempos estándar respecto al tiempo total del proceso fue de 9.06% para las paradas rutinarias y 90.94% para el proceso de embotellado
- Proporción del tiempo planificado: 6.90 % · según el reporte: “cambios de formato”
Ver cita textual
La reducción del tiempo estándar por la reducción en los tiempos de cambios de formato pasó a representar el 6.9%, del tiempo total
- Melhoria do Indicador OEE em Linhas de Enchimento e Embalamento de Óleos e Azeites (2025)Abrir fuenteTiempo perdido: 10.0 horas · según el reporte: “tempo de setup”
Ver cita textual
Numa linha automática aplica-se a metodologia SMED, que permitiu reduzir o tempo de setup em 50 por cento, correspondendo a cerca de 10 horas de capacidade libertada num único mês.
- Розроблення заходів операційного вдосконалення виробничих процесів виготовлення вермішелі швидкого приготування “Reeva зі смаком гострої курки” для оператора ринку ТОВ «Евро Фуд Сервіс» (2025)Abrir fuenteDuración media del evento: 2,100 с · según el reporte: “розгінна фаза (Setup Time) виробництва після зупинки та запуску із холодного старту”
Ver cita textual
Особливе значення має розгінна фаза (Setup Time) виробництва після зупинки та запуску із холодного старту, вона триває в середньому 2 100 секунд (35 хвилин) (Табл 3.3).
- Enterprise Resource Planning System Integrated with Overall Equipment Effectiveness for Enhanced Performance Tracking Metrics: Mixed-Methods Case Study of a Nigerian Feed Mill (2026)Abrir fuenteProporción del tiempo perdido: 2.59 % · según el reporte: “Production change”
Ver cita textual
5 Production change 34.76 2.59 100.00 Trivial many
- Enterprise Resource Planning System Integrated with Overall Equipment Effectiveness for Enhanced Performance Tracking Metrics: Mixed-Methods Case Study of a Nigerian Feed Mill (2026)Abrir fuenteTiempo perdido: 34.8 hrs · según el reporte: “Production change”
Ver cita textual
5 Production change 34.76 2.59 100.00 Trivial many
- Tiempo perdido: 2.43 hrs per production cycle · según el reporte: “set up time”
Ver cita textual
the improved processes can reduce set up time from 6.90 hrs per production cycle to 2.43 hrs per production cycle or about 64.78%
- Tiempo perdido: 6.90 hrs per production cycle · según el reporte: “set up time”
Ver cita textual
the improved processes can reduce set up time from 6.90 hrs per production cycle to 2.43 hrs per production cycle or about 64.78%
- Integrasi OEE–Pareto–FMEA–Ishikawa untuk Peningkatan Efektivitas Mesin dan Mutu Kemasan Kecap Pouch 550 mL: Integrated OEE–Pareto–FMEA–Ishikawa Approach for Improving Machine Effectiveness and Packaging Quality of 550 mL Soy Sauce Pouch (2026)Abrir fuenteProporción del tiempo perdido: 19.0 % · según el reporte: “Setup and adjustment loss”
Ver cita textual
Setup and adjustment loss 19

