foratvise
Comenzar
Estudio incluido

Maximizing Machine Efficiency in Indonesia's Noodle Industry

Abrir fuente

1Ficha bibliográfica

Autores
Mohammad Andi Rasyid, Tedjo Sukmono
Año
2024
Publicación
Procedia of Engineering and Life Science
País
Indonesia
Segmento
Panadería y pastas
Familia de procesos
Formado, horneado y cocción
Tipo de estudio
Estudio de caso único
Alcance de la extracción
Texto completo
Tamaño
1 plantas · — líneas · — máquinas
Periodo de observación
30 días
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
Perusahaan yang bergerak dalam sektor manufaktur makanan dengan hasil produksi berupa produk mi kering, mi instan dan mi bihun.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 12Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—
Ver cita textual (Table 4)
November 98,30 87,40 97,44 83,70
noneOEE83.7 %Un solo extractor
—
Ver cita textual (Table 4)
November 98,30 87,40 97,44 83,70
noneDisponibilidad98.3 %Un solo extractor
—
Ver cita textual (Table 4)
November 98,30 87,40 97,44 83,70
noneRendimiento87.4 %Un solo extractor
—
Ver cita textual (Table 4)
November 98,30 87,40 97,44 83,70
noneCalidad97.4 %Un solo extractor
Breakdown Losses
Ver cita textual (Section III.E.1)
𝐵𝑟𝑒𝑎𝑘𝑑𝑜𝑤𝑛 𝐿𝑜𝑠𝑠𝑒𝑠= 1,704 %
Fallas de equipo (averías)Proporción del tiempo planificado1.70 %Un solo extractor
Setup and adjustment losses
Ver cita textual (Section III.E.2)
𝑆𝑒𝑡𝑢𝑝 𝑎𝑛𝑑 𝑎𝑑𝑗𝑢𝑠𝑚𝑒𝑛𝑡 𝑙𝑜𝑠𝑠𝑒𝑠= 0 %
Setups y ajustesProporción del tiempo planificado0 %Un solo extractor
Reduced speed losses
Ver cita textual (Section III.E.3)
𝑅𝑒𝑑𝑢𝑐𝑒𝑑 𝑠𝑝𝑒𝑒𝑑 𝑙𝑜𝑠𝑠𝑒𝑠𝑠= 12,386 %
Velocidad reducidaProporción del tiempo planificado12.4 %Un solo extractor
Idling minor stoppage losses
Ver cita textual (Section III.E.4)
𝐼𝑑𝑙𝑖𝑛𝑔 𝑚𝑖𝑛𝑜𝑟 𝑠𝑡𝑜𝑝𝑎𝑔𝑒 𝑙𝑜𝑠𝑠𝑒𝑠= 2,353 %
Microparos y esperasProporción del tiempo planificado2.35 %Un solo extractor
Defect in process
Ver cita textual (Section III.E.5)
𝐷𝑒𝑓𝑒𝑐𝑡 𝑖𝑛 𝑝𝑟𝑜𝑐𝑒𝑠𝑠= 2,202 %
Defectos de proceso (desecho y reproceso)Proporción del tiempo planificado2.20 %Un solo extractor
Reduced yield losses
Ver cita textual (Section III.E.6)
𝑅𝑒𝑑𝑢𝑐𝑒𝑑 𝑦𝑖𝑒𝑙𝑑 𝑙𝑜𝑠𝑠𝑒𝑠= 0 %
Pérdidas de arranque (rendimiento reducido)Proporción del tiempo planificado0 %Un solo extractor

Unidades de observación

  • Mesin produksi (production machine, November) · Línea completa o equipo sin especificar · Línea base