foratvise
Comenzar
Estudio incluido

Using Lean Manufacturing Approach for Improvement in Food Manufacturing: Case Study from Egypt

Abrir fuente

1Ficha bibliográfica

Autores
Noha A. Mostafa, Karim Ahmed
Año
2024
Publicación
International Conference on Industrial Engineering and Operations Management (IEOM)
País
Egypt
Segmento
Carne, aves y pescado
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · — máquinas
Periodo de observación
—
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
The processed meat production line was selected for the study as it has the largest market share.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 7Riesgo alto
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
Install new plastic packagesfiller machine
Ver cita textual (Table 1)
Install new plastic packages 2 min 17 min Internal
Setups y ajustesTiempo perdido2.00 minAmbos extractores coincidieron
Transport die to the machinefiller machine
Ver cita textual (Table 1)
Transport die to the machine 2 min 4 min External
Setups y ajustesTiempo perdido2.00 minAmbos extractores coincidieron
Check on first piecefiller machine
Ver cita textual (Table 1)
Check on first piece 0.5 min 17.5 min External
Setups y ajustesTiempo perdido0.500 minAmbos extractores coincidieron
Program the machinefiller machine
Ver cita textual (Table 1)
Program the machine 5 min 15 min Internal
Setups y ajustesTiempo perdido5.00 minAmbos extractores coincidieron
Change machine diefiller machine
Ver cita textual (Table 1)
Change machine die 6 min 10 min Internal
Setups y ajustesTiempo perdido6.00 minAmbos extractores coincidieron
Search for new diefiller machine
Ver cita textual (Table 1)
Search for new die 2 min 2 min External
Setups y ajustesTiempo perdido2.00 minAmbos extractores coincidieron
Documentationfiller machine
Ver cita textual (Table 1)
Documentation 0.5 min 18 min External
Setups y ajustesTiempo perdido0.500 minAmbos extractores coincidieron
Total waiting time
Ver cita textual (Section 4.1)
The total processing time was 1619 minutes, the total waiting time was 53 minutes, and the total lead time was 1672 minutes.
No clasificable a partir del reporteTiempo perdido53.0 minAmbos extractores coincidieron
Total time of setupfiller machine
Ver cita textual (Table 3)
Initial 18 11
Setups y ajustesTiempo perdido18.0 minUn solo extractor
Internal tasks timefiller machine
Ver cita textual (Table 3)
Initial 18 11
Setups y ajustesTiempo perdido11.0 minUn solo extractor
Change machine diefiller machine
Ver cita textual (Section 4.2.1)
The total changeover time is 18 min and changing the die takes almost 33% of this time while programming the machine takes 27%.
Setups y ajustesProporción del tiempo perdido33.0 %Un solo extractor
Program the machinefiller machine
Ver cita textual (Section 4.2.1)
The total changeover time is 18 min and changing the die takes almost 33% of this time while programming the machine takes 27%.
Setups y ajustesProporción del tiempo perdido27.0 %Un solo extractor
Transportation time
Ver cita textual (Abstract)
For the automated line, a reduction from 10 to 5 min was achieved which represents improvement by 50% in the transportation time.
No clasificable a partir del reporteTiempo perdido10.0 minUn solo extractor
Unpacking cycle time
Ver cita textual (Section 4.3)
This led to reduce the unpacking cycle time to 8 min instead of 12 min.
No clasificable a partir del reporteTiempo perdido12.0 minUn solo extractor
—filling machine
Ver cita textual (Page 7, Section 4.2.1)
The total changeover time is 18 min and changing the die takes almost 33% of this time while programming the machine takes 27%.
Setups y ajustesTiempo perdido18.0 minUn solo extractor
—
Ver cita textual (Section 4.1 Current state VSM, Page 5)
the total lead time was 1672 minutes
noneCapacidad de producción1,672 minUn solo extractor
—
Ver cita textual (Section 4.1 Current state VSM, Page 5)
The total processing time was 1619 minutes
noneCapacidad de producción1,619 minUn solo extractor
—unpacking
Ver cita textual (Section 4.3 Mapping Future State, Page 10)
This led to reducing the unpacking cycle time to 8 min instead of 12 min.
noneCapacidad de producción12.0 minUn solo extractor
—automated conveyor transport
Ver cita textual (Abstract, Page 1)
For the automated line, a reduction from 10 to 5 min was achieved which represents improvement by 50% in the transportation time.
noneCapacidad de producción10.0 minUn solo extractor
—filling machine
Ver cita textual (Abstract, Page 1)
After applying Single Minute Exchange of die, it was found that changeover time was reduced from 18 to 11 min
Setups y ajustesTiempo perdido11.0 minUn solo extractor
Search for new diefilling machine
Ver cita textual (Table 2, Page 8)
Search for new die | 2 min | 2 min | External
Setups y ajustesTiempo perdido2.00 minUn solo extractor
Transport die to the machinefilling machine
Ver cita textual (Table 2, Page 8)
Transport die to the machine | 2 min | 4 min | External
Setups y ajustesTiempo perdido2.00 minUn solo extractor
Change machine diefilling machine
Ver cita textual (Table 2, Page 8)
Change machine die | 2 min | 6 min | Internal
Setups y ajustesTiempo perdido2.00 minUn solo extractor
Programming machinefilling machine
Ver cita textual (Table 2, Page 8)
Programming machine | 1 min | 8 min | Internal
Setups y ajustesTiempo perdido1.00 minUn solo extractor
Install new plastic packagesfilling machine
Ver cita textual (Table 2, Page 8)
Install new plastic packages | 2 min | 10 min | Internal
Setups y ajustesTiempo perdido2.00 minUn solo extractor
Check on first piecefilling machine
Ver cita textual (Table 2, Page 8)
Check on first piece | 0.5 min | 10.5 min | External
Setups y ajustesTiempo perdido0.500 minUn solo extractor
Documentation papersfilling machine
Ver cita textual (Table 2, Page 8)
Documentation papers | 0.5 min | 11 min | External
Setups y ajustesTiempo perdido0.500 minUn solo extractor
—
Ver cita textual (Section 4.3 Mapping Future State, Page 10)
The new total processing time is 1615 minutes, the new total waiting time is 48 minutes, and the new total lead time was 1663 minutes.
No clasificable a partir del reporteTiempo perdido48.0 minUn solo extractor
—
Ver cita textual (Section 4.3 Mapping Future State, Page 10)
the new total lead time was 1663 minutes
noneCapacidad de producción1,663 minUn solo extractor
—
Ver cita textual (Section 4.3 Mapping Future State, Page 10)
The new total processing time is 1615 minutes
noneCapacidad de producción1,615 minUn solo extractor
—unpacking
Ver cita textual (Section 4.3 Mapping Future State, Page 10)
This led to reducing the unpacking cycle time to 8 min instead of 12 min.
noneCapacidad de producción8.00 minUn solo extractor
—automated conveyor transport
Ver cita textual (Abstract, Page 1)
For the automated line, a reduction from 10 to 5 min was achieved which represents improvement by 50% in the transportation time.
noneCapacidad de producción5.00 minUn solo extractor

Unidades de observación

  • Filler machine · Llenado · Línea base
  • Processed meat production line · Línea completa o equipo sin especificar · Línea base
  • Automated material handling line · Transporte y acumulación · Línea base
  • Raw meat unpacking area · Línea completa o equipo sin especificar · Línea base
  • Processed meat production line · Línea completa o equipo sin especificar · Después de la intervención