Estudio incluido
Optimizing Productivity in the Animal Feed Industry: A Lean Approach for Enhanced Efficiency and Quality Assurance
1Ficha bibliográfica
- Autores
- Jenny Elizabeth Jaico-Carranza, Eduardo Manuel Olivos-Valdivia, Martin Fidel Collao-Diaz
- Año
- 2024
- Publicación
- International Conference on Industrial Engineering and Operations Management (IEOM)
- País
- Peru
- Segmento
- Alimento animal y para mascotas
- Familia de procesos
- Planta completa o sin especificar
- Tipo de estudio
- Intervención antes/después
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 1 líneas · — máquinas
- Periodo de observación
- —
- Recolección de datos
- not_reported
- Intervención
Ver el contexto tal como lo describe el estudio
The case study focused on a small and medium-sized enterprise dedicated to the production of balanced animal feed, located in southern Peru.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 8Riesgo moderado
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—Ver cita textual (Section 5, Results and Discussion)cycle time was reduced by 47%, from 76.45 minutes per kilo to 40.56 minutes per kilo | none | Capacidad de producción | 40.6 minutes/Kg | Ambos extractores coincidieron |
—Ver cita textual (Section 5, Results and Discussion)with an average production of 1.05 kg of animal feed per man-hour, compared to 0.78 kg per man-hour before the improvement was made | none | Capacidad de producción | 1.05 kg/man-h | Ambos extractores coincidieron |
—Ver cita textual (Section 5, Results and Discussion)cycle time was reduced by 47%, from 76.45 minutes per kilo to 40.56 minutes per kilo | none | Capacidad de producción | 76.5 minutes/Kg | Ambos extractores coincidieron |
—Ver cita textual (Section 5, Results and Discussion)with an average production of 1.05 kg of animal feed per man-hour, compared to 0.78 kg per man-hour before the improvement was made | none | Capacidad de producción | 0.780 kg/man-h | Ambos extractores coincidieron |
Line preparation time (changeover)Ver cita textual (Table 1)Line preparation time (seconds) SMED 524.92 140 140.36 -73% | Setups y ajustes | Tiempo perdido | 525 seconds | Un solo extractor |
Line preparation time (changeover)Ver cita textual (Table 1)Line preparation time (seconds) SMED 524.92 140 140.36 -73% | Setups y ajustes | Tiempo perdido | 140 seconds | Un solo extractor |
—Ver cita textual (Table 1, page 663)Line preparation time (seconds) | SMED | 524.92 | 140 | 140.36 | -73% | Setups y ajustes | Duración media del evento | 525 seconds | Un solo extractor |
—Ver cita textual (Table 1, page 663)Production program compliance rate (%) | Heijunka | 45.64% | 95% | 90.56% | 98% | none | Rendimiento | 45.6 % | Un solo extractor |
—Ver cita textual (Table 1, page 663)Line preparation time (seconds) | SMED | 524.92 | 140 | 140.36 | -73% | Setups y ajustes | Duración media del evento | 140 seconds | Un solo extractor |
—Ver cita textual (Table 1, page 663)Production program compliance rate (%) | Heijunka | 45.64% | 95% | 90.56% | 98% | none | Rendimiento | 90.6 % | Un solo extractor |
Unidades de observación
- Production line (Results / post-intervention) · Línea completa o equipo sin especificar · Después de la intervención
- Production line (As Is / baseline) · Línea completa o equipo sin especificar · Línea base
- Whole plant · Línea completa o equipo sin especificar · Línea base
- Whole plant · Línea completa o equipo sin especificar · Después de la intervención

