foratvise
Comenzar
Estudio incluido

Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies

Abrir fuente

1Ficha bibliográfica

Autores
Sair Castañeda, Sharon Rodriguez, Orkun Yıldız, Duilio Aranda, José C. Álvarez
Año
2024
Publicación
International Journal of Engineering Trends and Technology
País
Peru
Segmento
Azúcar y confitería
Familia de procesos
Formado, horneado y cocción
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · 2 máquinas
Periodo de observación
60 días
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
The company under study belongs to the food industry in Lima, Peru. It has five production lines: Chocolate Line, Confectionery, Instant Products, Cereals and Milling.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 9Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—
Ver cita textual (Discussion)
availability increases by 12.10%; initially, this parameter presented a percentage of 79.06%, and after the implementation, a value equal to 89.37% was obtained.
noneDisponibilidad89.4 %Ambos extractores coincidieron
—
Ver cita textual (Section 3.3.3)
Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%)
noneCalidad95.2 %Ambos extractores coincidieron
—
Ver cita textual (Section 3.3.3)
Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%)
noneRendimiento94.9 %Ambos extractores coincidieron
—
Ver cita textual (Section 3.3.3)
Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%)
noneDisponibilidad78.1 %Ambos extractores coincidieron
—
Ver cita textual (Section 3.3.3)
Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%)
noneOEE70.5 %Ambos extractores coincidieron
—
Ver cita textual (Table 1)
OEE 78.05% 90.00% 11.95 pp
noneOEE78.1 %Un solo extractor
—
Ver cita textual (Section 4.1)
a gap in machinery availability has been identified, with the company under study reporting a value of 79.06%; however, the industry reflects that the value is acceptable greater than 90%.
noneDisponibilidad79.1 %Un solo extractor
—Doser/Cutter and Packer
Ver cita textual (Conclusion)
The number of stops due to machinery breakdowns and human errors was reduced, resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance).
Fallas de equipo (averías)Tiempo entre eventos29.2 hUn solo extractor
—Doser/Cutter and Packer
Ver cita textual (Conclusion)
The number of stops due to machinery breakdowns and human errors was reduced, resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance).
Fallas de equipo (averías)Duración media del evento7.72 hUn solo extractor
—Doser/Cutter and Packer
Ver cita textual (Conclusion)
The number of stops due to machinery breakdowns and human errors was reduced, resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance).
Fallas de equipo (averías)Tiempo entre eventos34.9 hUn solo extractor
—Doser/Cutter and Packer
Ver cita textual (Conclusion)
The number of stops due to machinery breakdowns and human errors was reduced, resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance).
Fallas de equipo (averías)Duración media del evento8.72 hUn solo extractor
—
Ver cita textual (Table 4)
147.54 15 23 63.22 84.32
Setups y ajustesTiempo perdido148 minUn solo extractor
Internal activities
Ver cita textual (Table 4)
147.54 15 23 63.22 84.32
Setups y ajustesNúmero de eventos15.0 eventsUn solo extractor
External activities
Ver cita textual (Table 4)
147.54 15 23 63.22 84.32
Setups y ajustesNúmero de eventos23.0 eventsUn solo extractor
Internal activities
Ver cita textual (Table 4)
147.54 15 23 63.22 84.32
Setups y ajustesTiempo perdido63.2 minUn solo extractor
External activities
Ver cita textual (Table 4)
147.54 15 23 63.22 84.32
Setups y ajustesTiempo perdido84.3 minUn solo extractor
—
Ver cita textual (Table 5)
138.14 9 29 40.72 97.42
Setups y ajustesTiempo perdido138 minUn solo extractor
Internal activities
Ver cita textual (Table 5)
138.14 9 29 40.72 97.42
Setups y ajustesNúmero de eventos9.00 eventsUn solo extractor
External activities
Ver cita textual (Table 5)
138.14 9 29 40.72 97.42
Setups y ajustesNúmero de eventos29.0 eventsUn solo extractor
Internal activities
Ver cita textual (Table 5)
138.14 9 29 40.72 97.42
Setups y ajustesTiempo perdido40.7 minUn solo extractor
External activities
Ver cita textual (Table 5)
138.14 9 29 40.72 97.42
Setups y ajustesTiempo perdido97.4 minUn solo extractor
—
Ver cita textual (Section 4.3.2 Phase 4)
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
Setups y ajustesTiempo perdido106 minUn solo extractor
External activities
Ver cita textual (Section 4.3.2 Phase 4)
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
Setups y ajustesNúmero de eventos25.0 eventsUn solo extractor
Internal activities
Ver cita textual (Section 4.3.2 Phase 4)
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
Setups y ajustesTiempo perdido25.6 minUn solo extractor
External activities
Ver cita textual (Section 4.3.2 Phase 4)
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
Setups y ajustesTiempo perdido80.1 minUn solo extractor
Hours of factual preventive maintenance - Month 1
Ver cita textual (Table 7)
Month 1 14.00 25.00 11.00
Paro planificado (mantenimiento programado, descansos, sin demanda)Tiempo perdido25.0 hUn solo extractor
Extra hours - Month 1
Ver cita textual (Table 7)
Month 1 14.00 25.00 11.00
Paro planificado (mantenimiento programado, descansos, sin demanda)Tiempo perdido11.0 hUn solo extractor
Hours of factual preventive maintenance - Month 2
Ver cita textual (Table 7)
Month 2 12.00 20.00 8.00
Paro planificado (mantenimiento programado, descansos, sin demanda)Tiempo perdido20.0 hUn solo extractor
Extra hours - Month 2
Ver cita textual (Table 7)
Month 2 12.00 20.00 8.00
Paro planificado (mantenimiento programado, descansos, sin demanda)Tiempo perdido8.00 hUn solo extractor
—
Ver cita textual (Section 3.3.3)
performance (94.86%) and quality (95.19%)
noneRendimiento94.9 %Un solo extractor
—
Ver cita textual (Section 3.3.3)
quality (95.19%)
noneCalidad95.2 %Un solo extractor
Breakdowns in the MachineryPacker, Doser/Cutter
Ver cita textual (Table 9, Pilot test on the leading causes of unplanned shutdowns)
Breakdowns in the Machinery 12.20%
Fallas de equipo (averías)Proporción de eventos de pérdida12.2 %Un solo extractor
Breakdowns due to human errors in calibration or operation
Ver cita textual (Table 9, Pilot test on the leading causes of unplanned shutdowns)
Breakdowns due to human errors in calibration or operation 8.47%
Fallas de equipo (averías)Proporción de eventos de pérdida8.47 %Un solo extractor

Unidades de observación

  • Confectionery line · Línea completa o equipo sin especificar · Después de la intervención
  • Confectionery line · Línea completa o equipo sin especificar · Línea base
  • Critical machines (Doser/Cutter and Packer) · Línea completa o equipo sin especificar · Línea base
  • Critical machines (Doser/Cutter and Packer) · Línea completa o equipo sin especificar · Después de la intervención
  • Confectionery line (SMED setup activities) · Línea completa o equipo sin especificar · Línea base
  • Confectionery line (SMED setup activities) · Línea completa o equipo sin especificar · Después de la intervención
  • Confectionery line (preventive maintenance, pilot test) · Línea completa o equipo sin especificar · Después de la intervención