foratvise
Comenzar
Estudio incluido

Enhancing Operational Efficiency in Craft Beer Production: Implementation of Lean Manufacturing and TPM Methodologies in SMEs

Abrir fuente

1Ficha bibliográfica

Autores
Ronald Wilmer Perez-Peralta, Adonis Meza-Estrada, Martin Fidel Collao-Diaz
Año
2024
Publicación
International Conference on Industrial Engineering and Operations Management (IEOM)
País
Peru
Segmento
Cerveza, vino y destilados
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · 1 máquinas
Periodo de observación
—
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
The set-up and format change time in the packaging machine to produce beer cans should be reduced with the help of distance optimization in relation to the components for changing the format and configuration of the equipment.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 8Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—
Ver cita textual (Section 4.1 Initial Diagnosis)
The operational efficiency of the case study stood at 78.10% during 2022, in contrast to the industry standard of 85% (Danlyan et al., 2020).
noneOEE78.1 %Un solo extractor
errors in the conduct of operations
Ver cita textual (Section 4.1 Initial Diagnosis)
errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.
No clasificable a partir del reporteProporción del tiempo perdido39.2 %Un solo extractor
reprocessing
Ver cita textual (Section 4.1 Initial Diagnosis)
errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.
Defectos de proceso (desecho y reproceso)Proporción del tiempo perdido14.0 %Un solo extractor
process shutdowns due to machine failures
Ver cita textual (Section 4.1 Initial Diagnosis)
errors in the conduct of operations accounted for 39.20%, reprocessing constituted 13.95%, and process shutdowns due to machine failures covered 46.85%.
Fallas de equipo (averías)Proporción del tiempo perdido46.9 %Un solo extractor
setup timepacker (filler)
Ver cita textual (Table 1 / Section 5 Results)
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
Setups y ajustesDuración media del evento41.0 minUn solo extractor
downtime of the processpacker (filler)
Ver cita textual (Table 1 / Section 5 Results)
Process downtime decreased from 74 to 22.75 minutes, a 69% reduction.
No clasificable a partir del reporteTiempo perdido74.0 minUn solo extractor
rate of defective productspacker (filler)
Ver cita textual (Table 1 / Section 5 Results)
The rate of defective products was reduced from 2.97% to 1.30%, which is equivalent to a 56% decrease.
Defectos de proceso (desecho y reproceso)Tasa de defectos2.97 %Un solo extractor
setup timepacker (filler)
Ver cita textual (Table 1 / Section 5 Results)
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
Setups y ajustesDuración media del evento29.0 minUn solo extractor
downtime of the processpacker (filler)
Ver cita textual (Table 1 / Section 5 Results)
Process downtime decreased from 74 to 22.75 minutes, a 69% reduction.
No clasificable a partir del reporteTiempo perdido22.8 minUn solo extractor
rate of defective productspacker (filler)
Ver cita textual (Table 1 / Section 5 Results)
The rate of defective products was reduced from 2.97% to 1.30%, which is equivalent to a 56% decrease.
Defectos de proceso (desecho y reproceso)Tasa de defectos1.30 %Un solo extractor
—Filler/packer
Ver cita textual (Table 1, Section 5. Results)
SETUP Time (min) | 41 | 30 | 29 | -29%
Setups y ajustesTiempo perdido41.0 minUn solo extractor
—Filler/packer
Ver cita textual (Table 1, Section 5. Results)
Downtime of the process (min) | 74 | 45 | 22.75 | -69%
No clasificable a partir del reporteTiempo perdido74.0 minUn solo extractor
—
Ver cita textual (Table 1, Section 5. Results)
Rate of defective products (%) | 2.97% | 1.50% | 1.30% | -56%
Defectos de proceso (desecho y reproceso)Tasa de defectos2.97 %Un solo extractor
—Filler/packer
Ver cita textual (Table 1, Section 5. Results)
SETUP Time (min) | 41 | 30 | 29 | -29%
Setups y ajustesTiempo perdido29.0 minUn solo extractor
—Filler/packer
Ver cita textual (Table 1, Section 5. Results)
Downtime of the process (min) | 74 | 45 | 22.75 | -69%
No clasificable a partir del reporteTiempo perdido22.8 minUn solo extractor
—
Ver cita textual (Table 1, Section 5. Results)
Rate of defective products (%) | 2.97% | 1.50% | 1.30% | -56%
Defectos de proceso (desecho y reproceso)Tasa de defectos1.30 %Un solo extractor

Unidades de observación

  • Whole plant (2022 diagnosis) · Línea completa o equipo sin especificar · Línea base
  • Packaging line (filler) · Llenado · Línea base
  • Packaging line (filler) · Llenado · Después de la intervención
  • Filler · Llenado · Línea base
  • Filler · Llenado · Después de la intervención