Estudio incluido
A Lean Manufacturing Case Study: Enhancing Efficiency and Reducing Waste in Latin American Food Production
1Ficha bibliográfica
- Autores
- Alexandra Katherine Rojas-Valverde, Claudia Alexandra Muñoz-Briceño
- Año
- 2024
- Publicación
- International Conference on Industrial Engineering and Operations Management (IEOM)
- País
- Peru
- Segmento
- Panadería y pastas
- Familia de procesos
- Formado, horneado y cocción
- Tipo de estudio
- Intervención antes/después
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 1 líneas · — máquinas
- Periodo de observación
- —
- Recolección de datos
- not_reported
- Intervención
Ver el contexto tal como lo describe el estudio
Figure 1 shows the production model based on Lean Manufacturing philosophy, applied to the cookie production line.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 10Riesgo moderado
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—Ver cita textual (Table 2)Centerlining Quality rate of finished products 91% 95% 95.90% 5.38% | none | Calidad | 91.0 % | Ambos extractores coincidieron |
—Ver cita textual (Table 2)TPM Rate of performance of machines 89% 95% 95.00% 6.74% | none | Rendimiento | 89.0 % | Ambos extractores coincidieron |
—Ver cita textual (Table 2)Centerlining Quality rate of finished products 91% 95% 95.90% 5.38% | none | Calidad | 95.9 % | Ambos extractores coincidieron |
—Ver cita textual (Table 2)TPM Rate of availability of machines 91% 95% 95.10% 4.51% | none | Disponibilidad | 91.0 % | Ambos extractores coincidieron |
—Ver cita textual (Section 4.2, Figure 5)In the first quarter of the following year, the OEE further increased to 86.7%. | none | OEE | 86.7 % | Ambos extractores coincidieron |
—Ver cita textual (Table 2)TPM Rate of availability of machines 91% 95% 95.10% 4.51% | none | Disponibilidad | 95.1 % | Ambos extractores coincidieron |
—Ver cita textual (Table 2)TPM Rate of performance of machines 89% 95% 95.00% 6.74% | none | Rendimiento | 95.0 % | Ambos extractores coincidieron |
—Ver cita textual (Table 2)TPM OEE 83% 95% 86.70% 4.46% | none | OEE | 83.0 % | Ambos extractores coincidieron |
Scrap rateVer cita textual (Table 2)PokaYoke Scrap rate 15% 5% 4.00% -73.33% | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 15.0 % | Un solo extractor |
high rate of declineVer cita textual (Section 4.1, Figure 2)At the first level, three main reasons were identified: a high rate of decline (55%), a high rate of defective products (25%), and elevated unproductive times (20%). | Defectos de proceso (desecho y reproceso) | Proporción del tiempo perdido | 55.0 % | Un solo extractor |
high rate of defective productsVer cita textual (Section 4.1, Figure 2)At the first level, three main reasons were identified: a high rate of decline (55%), a high rate of defective products (25%), and elevated unproductive times (20%). | Defectos de proceso (desecho y reproceso) | Proporción del tiempo perdido | 25.0 % | Un solo extractor |
elevated unproductive timesVer cita textual (Section 4.1, Figure 2)At the first level, three main reasons were identified: a high rate of decline (55%), a high rate of defective products (25%), and elevated unproductive times (20%). | Fallas de equipo (averías) | Proporción del tiempo perdido | 20.0 % | Un solo extractor |
clogging of cookies in conveyor belt chutesconveyor belt chutesVer cita textual (Section 4.1, Figure 2)At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%). | Microparos y esperas | Proporción del tiempo perdido | 55.0 % | Un solo extractor |
product fragilityVer cita textual (Section 4.1, Figure 2)At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%). | Defectos de proceso (desecho y reproceso) | Proporción del tiempo perdido | 13.5 % | Un solo extractor |
inadequate sealing of packagingprimary packaging machineVer cita textual (Section 4.1, Figure 2)At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%). | Defectos de proceso (desecho y reproceso) | Proporción del tiempo perdido | 11.5 % | Un solo extractor |
conveyor belt failuresconveyor beltVer cita textual (Section 4.1, Figure 2)At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%). | Fallas de equipo (averías) | Proporción del tiempo perdido | 20.0 % | Un solo extractor |
Scrap rateVer cita textual (Table 2)PokaYoke Scrap rate 15% 5% 4.00% -73.33% | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 4.00 % | Un solo extractor |
—Ver cita textual (Section 4.2, Figure 5)In the first quarter, the OEE was 79.6%, increasing to 83.1% in the second quarter and 83.4% in the third quarter. | none | OEE | 79.6 % | Un solo extractor |
—Ver cita textual (Section 4.2, Figure 5)In the first quarter, the OEE was 79.6%, increasing to 83.1% in the second quarter and 83.4% in the third quarter. | none | OEE | 83.1 % | Un solo extractor |
—Ver cita textual (Section 4.2, Figure 5)In the first quarter, the OEE was 79.6%, increasing to 83.1% in the second quarter and 83.4% in the third quarter. | none | OEE | 83.4 % | Un solo extractor |
—Ver cita textual (Section 4.2, Figure 5)In the fourth quarter, the OEE reached 85.7%, surpassing the 85% target. | none | OEE | 85.7 % | Un solo extractor |
—Ver cita textual (page 9, section 5 Results)Additionally, the quality rate of finished products increased from 91% to 95.90%, and the scrap rate decreased from 15% to 4.00%. | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 15.0 % | Un solo extractor |
—Ver cita textual (page 9, section 5 Results)Additionally, the quality rate of finished products increased from 91% to 95.90%, and the scrap rate decreased from 15% to 4.00%. | Defectos de proceso (desecho y reproceso) | Tasa de defectos | 4.00 % | Un solo extractor |
Unidades de observación
- Biscuit Type D production line · Línea completa o equipo sin especificar · Línea base
- Biscuit Type D production line · Línea completa o equipo sin especificar · Después de la intervención

