foratvise
Comenzar
Estudio incluido

Lean Six Sigma 4.0 Application in the Food and Beverage Industry: A Case Study

Abrir fuente

1Ficha bibliográfica

Autores
Wasley de Jesus Santos, Olivia McDermott, Anna Trubetskaya
Año
2025
Publicación
IEEE Engineering Management Review
País
Ireland
Segmento
Refrescos, agua embotellada y jugos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · — líneas · — máquinas
Periodo de observación
90 días
Recolección de datos
automatic_monitoring
Intervención
Ver el contexto tal como lo describe el estudio
This approach was tested in a case study conducted at a multinational food and beverage company that manufactures concentrates sent to bottling plants worldwide.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 11Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Automatic line monitoring, or systematic logs covering every stop in the period.2 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
size changeovers
Ver cita textual (Section 4.1 Define / Figure 3)
Specifically,label changeovers account for a 16% loss,followed closely by CIP processes at 15% and size changeovers at 8.9%.
Setups y ajustesProporción del tiempo perdido8.90 %Ambos extractores coincidieron
changeovers
Ver cita textual (Section 4.1 Define / Figure 3)
A notable finding is that changeovers contribute to 40% of the total losses,emphasising the impact of equipment and process adjustments on operational performance.
Setups y ajustesProporción del tiempo perdido40.0 %Ambos extractores coincidieron
label changeovers
Ver cita textual (Section 4.1 Define / Figure 3)
Specifically,label changeovers account for a 16% loss,followed closely by CIP processes at 15% and size changeovers at 8.9%.
Setups y ajustesProporción del tiempo perdido16.0 %Ambos extractores coincidieron
—
Ver cita textual (Abstract)
This leads to the improvement of OEE from 44.4% to 50%,which is partially supported by the integration of inline specific gravity meters and conductivity meters.
noneOEE50.0 %Ambos extractores coincidieron
—
Ver cita textual (Section 4.1 Define)
The current OEE of the Ireland Plant was 44.4%,which is noticeably below the established target.
noneOEE44.4 %Ambos extractores coincidieron
CIP conductivity meter - operational congestionconductivity meter
Ver cita textual (Section 4.4 Improve)
This enhancement reduced the overall CIP cycle time and decreased operational congestion by 2.6 h per week,showcasing a substantial increase in efficiency.
Setups y ajustesTiempo perdido2.60 hAmbos extractores coincidieron
CIP processes
Ver cita textual (Section 4.1 Define / Figure 3)
Specifically,label changeovers account for a 16% loss,followed closely by CIP processes at 15% and size changeovers at 8.9%.
Setups y ajustesProporción del tiempo perdido15.0 %Ambos extractores coincidieron
specific gravity meter (L-Dens 7400) implementationinline specific gravity meter L-Dens 7400
Ver cita textual (Section 4.4 Improve)
Adopting the L-Dens 7400 significantly reduced changeover times,shaving approximately 10 min off each transition.
Setups y ajustesTiempo perdido10.0 minAmbos extractores coincidieron
SMED and related improvements
Ver cita textual (Section 4.4 Improve)
Therefore,the total reduction in changeover time due to SMED and related improvements was 16 min.
Setups y ajustesTiempo perdido16.0 minAmbos extractores coincidieron
conductivity/temperature transmitters (CIP rinse)conductivity meter
Ver cita textual (Section 4.4 Improve)
This strategic placement allows for real-time,accurate measurements that speed up adjusting cleaning solutions,leading to a reduction of approximately 4 min per wash cycle.
Setups y ajustesTiempo perdido4.00 minAmbos extractores coincidieron
changeovers during liquid filling operations (2017)
Ver cita textual (Section 4.1 Define / Figure 4)
Starting from 7121 changeovers in 2017,there was a steady annual increase,culminating in 15 388 changeovers projected for 2023.
Setups y ajustesNúmero de eventos7,121 eventsUn solo extractor
changeovers during liquid filling operations (2023, projected)
Ver cita textual (Section 4.1 Define / Figure 4)
Starting from 7121 changeovers in 2017,there was a steady annual increase,culminating in 15 388 changeovers projected for 2023.
Setups y ajustesNúmero de eventos15,388 eventsUn solo extractor
5S tooling management
Ver cita textual (Section 4.4 Improve)
This organized approach has profoundly impacted changeover times,notably decreasing them by 6 min.
Setups y ajustesTiempo perdido6.00 minUn solo extractor

Unidades de observación

  • Ireland Plant - liquid filling line · Llenado · Línea base
  • Ireland Plant - liquid filling line · Llenado · Después de la intervención