foratvise
Comenzar
Estudio incluido

Productivity Improvement Through the Application of Lean Six Sigma Tools in a Non-Alcoholic Beverage Company

Abrir fuente

1Ficha bibliográfica

Autores
Stefanía Carolina Huerta Sánchez, Cesar David Mesia Perez, Rafael Mauricio Villanueva Flores, Jorge Alfredo Montoya Barragán
Año
2025
Publicación
International Conference on Industrial Engineering and Operations Management (IEOM)
País
Peru
Segmento
Refrescos, agua embotellada y jugos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · — máquinas
Periodo de observación
—
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
The study was conducted on a specific bottling line.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 5Riesgo alto
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
mechanical failures
Ver cita textual (Section 1 Introduction)
16,800 minutes/year lost to changeover times (setup), 1,120 minutes/year due to mechanical failures, 42,336 defective units/year, and 17,472 minutes/year spent searching for tools.
Fallas de equipo (averías)Tiempo perdido1,120 min/yearAmbos extractores coincidieron
format changeover (Set Up)
Ver cita textual (Section 4.2)
A total of 16,800 minutes per year associated with format changeover (Set Up) were identified, equivalent to 10.45% of productive time.
Setups y ajustesTiempo perdido16,800 min/yearAmbos extractores coincidieron
tool search
Ver cita textual (Section 4.1)
During the diagnostic phase, 17,472 annual minutes were identified as being associated with tool search activities, equivalent to 10.87% of total working time.
No clasificable a partir del reporteTiempo perdido17,472 min/yearAmbos extractores coincidieron
—
Ver cita textual (Abstract / Section 3)
an improvement of Overall Equipment Effectiveness (OEE) from 62% to 83%
noneOEE62.0 %Ambos extractores coincidieron
non-conformance
Ver cita textual (Table 1)
Defect rate (%) 9.62% 5.80 – 6.00 % – 40 %
Defectos de proceso (desecho y reproceso)Tasa de defectos9.62 %Un solo extractor
tool search
Ver cita textual (Section 4.1)
During the diagnostic phase, 17,472 annual minutes were identified as being associated with tool search activities, equivalent to 10.87% of total working time.
No clasificable a partir del reporteProporción del tiempo perdido10.9 %Un solo extractor
format changeover (Set Up)
Ver cita textual (Section 4.2)
A total of 16,800 minutes per year associated with format changeover (Set Up) were identified, equivalent to 10.45% of productive time.
Setups y ajustesProporción del tiempo planificado10.5 %Un solo extractor
mechanical failurereverse osmosis system
Ver cita textual (Section 4.3)
Mechanical failure downtime improved from 15.38% (73.83 min/shift) to 2.59% (12.44 min/shift) following implementation.
Fallas de equipo (averías)Tiempo perdido73.8 min/shiftUn solo extractor
mechanical failurereverse osmosis system
Ver cita textual (Section 4.3)
Mechanical failure downtime improved from 15.38% (73.83 min/shift) to 2.59% (12.44 min/shift) following implementation.
Fallas de equipo (averías)Proporción del tiempo planificado15.4 %Un solo extractor
—
Ver cita textual (Section 5 Testing and Results, page 5)
the initial non-conformance rate was 9.62%
Defectos de proceso (desecho y reproceso)Tasa de defectos9.62 %Un solo extractor
—
Ver cita textual (Introduction, page 2)
The technical diagnostic identified key causes, including 16,800 minutes/year lost to changeover times (setup), 1,120 minutes/year due to mechanical failures, 42,336 defective units/year, and 17,472 minutes/year spent searching for tools.
Defectos de proceso (desecho y reproceso)Número de eventos42,336 units/yearUn solo extractor
—
Ver cita textual (Section 5 Testing and Results, page 5)
The initial analysis revealed that the production line recorded a productivity level of 12.53 L/sol, representing a 34.7% deviation below the industry benchmark of 19.2 L/sol
noneCapacidad de producción12.5 L/solUn solo extractor

Unidades de observación

  • Water bottling line (As-Is diagnostic) · Línea completa o equipo sin especificar · Línea base
  • Production line · Línea completa o equipo sin especificar · Línea base