foratvise
Comenzar
Estudio incluido

Reducing Changeover Time Through SMED Methodology: A Review and Case Application in Beverage Bottling

Abrir fuente

1Ficha bibliográfica

Autores
Nishchay Selot -
Año
2026
Publicación
International Scientific Journal of Engineering and Management
País
—
Segmento
Productos lácteos
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Solo resumen
Tamaño
1 plantas · 1 líneas · — máquinas
Periodo de observación
—
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
A primary case study applies SMED to a product changeover at a milk beverage bottling plant using Tetra Pak aseptic filling equipment.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 6Riesgo alto
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
product changeoverTetra Pak aseptic filling equipment
Ver cita textual (Abstract)
The intervention reduced average changeover time from 40 minutes to approximately 28 minutes - a 30% reduction
Setups y ajustesTiempo perdido28.0 minAmbos extractores coincidieron
product changeoverTetra Pak aseptic filling equipment
Ver cita textual (Abstract)
The intervention reduced average changeover time from 40 minutes to approximately 28 minutes - a 30% reduction
Setups y ajustesTiempo perdido40.0 minAmbos extractores coincidieron

Unidades de observación

  • milk beverage bottling line (Tetra Pak aseptic filling) · Llenado · Después de la intervención
  • milk beverage bottling line (Tetra Pak aseptic filling) · Llenado · Línea base