foratvise
Comenzar
Estudio incluido

Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines

Abrir fuente

1Ficha bibliográfica

Autores
António Rocha Esteves
Año
2026
Publicación
Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
DOI
—
País
Portugal
Segmento
Cerveza, vino y destilados
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 4 líneas · 2 máquinas
Periodo de observación
731 días
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
This dissertation, developed at the Super Bock Group's plant in Leça do Balio, addresses these losses on the Kisters and Mead secondary-packaging machines by combining the Single-Minute Exchange of Die (SMED) methodology with formal machine design

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 12Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—
Ver cita textual (Section 1.1, Figure 1.2)
during 2025 production (annual OEE averaged 61.63%)
noneOEE61.6 %Ambos extractores coincidieron
—
Ver cita textual (Section 1.1, Figure 1.1)
with an overall average of 58.8% (Figure 1.1)
noneOEE58.8 %Ambos extractores coincidieron
proactive retrieval of Format PartsKisters
Ver cita textual (Table 6.2)
Line 6 8 1.0/1.5 0.0 1.0/1.5
Setups y ajustesTiempo perdido0 minAmbos extractores coincidieron
Breakdowns and Malfunctions Time (BMT)
Ver cita textual (Section 1.2)
Although breakdown and malfunction losses (18.04%) are greater in aggregate than changeover and ramp-up losses (≈7.2%), they are not the focus of this study.
Fallas de equipo (averías)Proporción del tiempo planificado18.0 %Un solo extractor
Changeover Time (COT) and Ramp-Up Time (RUT)
Ver cita textual (Section 1.2)
Although breakdown and malfunction losses (18.04%) are greater in aggregate than changeover and ramp-up losses (≈7.2%), they are not the focus of this study.
Setups y ajustesProporción del tiempo planificado7.20 %Un solo extractor
proactive retrieval of Format PartsKisters
Ver cita textual (Table 6.2)
Line 1 6 0.5 0.0 0.5
Setups y ajustesTiempo perdido0.500 minUn solo extractor
proactive retrieval of Format PartsKisters
Ver cita textual (Table 6.2)
Line 1 6 0.5 0.0 0.5
Setups y ajustesTiempo perdido0 minUn solo extractor
proactive retrieval of Format PartsKisters
Ver cita textual (Table 6.2)
Line 2 6 1.0 0.0 1.0
Setups y ajustesTiempo perdido1.00 minUn solo extractor
proactive retrieval of Format PartsKisters
Ver cita textual (Table 6.2)
Line 2 6 1.0 0.0 1.0
Setups y ajustesTiempo perdido0 minUn solo extractor
proactive retrieval of Format PartsKisters
Ver cita textual (Table 6.2)
Line 5 10 1.0 0.0 1.0
Setups y ajustesTiempo perdido1.00 minUn solo extractor
proactive retrieval of Format PartsKisters
Ver cita textual (Table 6.2)
Line 5 10 1.0 0.0 1.0
Setups y ajustesTiempo perdido0 minUn solo extractor
proactive retrieval of Format PartsKisters
Ver cita textual (Table 6.2)
Line 6 8 1.0/1.5 0.0 1.0/1.5
Setups y ajustesTiempo perdido1.00 minUn solo extractor
Type A changeoverKisters
Ver cita textual (Table 6.4)
Type A 30.0, 33.0 (µ = 31.5) 24.0, 26.0 (µ = 25.0) 6.5 min 20.6%
Setups y ajustesDuración media del evento31.5 minUn solo extractor
Type B changeoverKisters
Ver cita textual (Table 6.4)
Type B 35.0, 28.0 (µ = 31.5) 26.0, 27.0 (µ = 26.5) 5.0 min 15.9%
Setups y ajustesDuración media del evento31.5 minUn solo extractor
Type C changeoverKisters
Ver cita textual (Table 6.4)
Type C 38.0, 49.0 (µ = 43.5) 35.0, 37.0 (µ = 37.5) 6.0 min 13.8%
Setups y ajustesDuración media del evento43.5 minUn solo extractor
Type D changeoverKisters
Ver cita textual (Table 6.4)
Type D 39.0, 39.0, 48.0 (µ = 42.0) 35.0, 35.0 (µ = 35.0) 7.0 min 16.7%
Setups y ajustesDuración media del evento42.0 minUn solo extractor
pooled all changeover types (A, B, C, D)Kisters
Ver cita textual (Section 6.4.2)
The pooled analysis shows a mean reduction from 37.7 to 30.6 minutes (18.7%), with a large effect size (Hedges’ g = 1.04).
Setups y ajustesDuración media del evento37.7 minUn solo extractor
Type A changeoverKisters
Ver cita textual (Table 6.4)
Type A 30.0, 33.0 (µ = 31.5) 24.0, 26.0 (µ = 25.0) 6.5 min 20.6%
Setups y ajustesDuración media del evento25.0 minUn solo extractor
Type B changeoverKisters
Ver cita textual (Table 6.4)
Type B 35.0, 28.0 (µ = 31.5) 26.0, 27.0 (µ = 26.5) 5.0 min 15.9%
Setups y ajustesDuración media del evento26.5 minUn solo extractor
Type C changeoverKisters
Ver cita textual (Table 6.4)
Type C 38.0, 49.0 (µ = 43.5) 35.0, 37.0 (µ = 37.5) 6.0 min 13.8%
Setups y ajustesDuración media del evento37.5 minUn solo extractor
Type D changeoverKisters
Ver cita textual (Table 6.4)
Type D 39.0, 39.0, 48.0 (µ = 42.0) 35.0, 35.0 (µ = 35.0) 7.0 min 16.7%
Setups y ajustesDuración media del evento35.0 minUn solo extractor
pooled all changeover types (A, B, C, D)Kisters
Ver cita textual (Section 6.4.2)
The pooled analysis shows a mean reduction from 37.7 to 30.6 minutes (18.7%), with a large effect size (Hedges’ g = 1.04).
Setups y ajustesDuración media del evento30.6 minUn solo extractor
Cardboard Module tuning stoppagesCardboard Cutout Feeding Module
Ver cita textual (Section 7.2, Figure 7.3)
Among the 29 changeovers interrupted for these reasons, 24 experienced multiple stoppages.
Setups y ajustesNúmero de eventos29.0 changeoversUn solo extractor
Cardboard Module tuning stoppages (multiple stoppages)Cardboard Cutout Feeding Module
Ver cita textual (Section 7.2, Figure 7.3)
Among the 29 changeovers interrupted for these reasons, 24 experienced multiple stoppages.
Setups y ajustesNúmero de eventos24.0 changeoversUn solo extractor
Cardboard Module fine-tuning (single stoppage)Cardboard Cutout Feeding Module
Ver cita textual (Section 7.2, Figure 7.4)
The median fine-tuning duration is 6 minutes for changeovers with a single stoppage, rising to 14 minutes for changeovers with two or more stoppages.
Setups y ajustesDuración media del evento6.00 minUn solo extractor
Cardboard Module fine-tuning (two or more stoppages)Cardboard Cutout Feeding Module
Ver cita textual (Section 7.2, Figure 7.4)
The median fine-tuning duration is 6 minutes for changeovers with a single stoppage, rising to 14 minutes for changeovers with two or more stoppages.
Setups y ajustesDuración media del evento14.0 minUn solo extractor
Folding Bracket Assembly Task (Redesigned Component)Kisters Folding Bracket Module
Ver cita textual (Abstract, page ii)
A redesigned tool-less folding bracket reduced its adjustment task time by 78.5% and its variance by 99.3% under statistically conclusive testing.
Setups y ajustesDuración media del evento78.5 % reductionUn solo extractor

Unidades de observación

  • Lines 1, 2, 5 and 6 (whole plant, SBG Leça do Balio) · Línea completa o equipo sin especificar · Línea base
  • Kisters - Line 6 (Format Parts Retrieval task) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención
  • Kisters - Line 1 (Format Parts Retrieval task) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Kisters - Line 1 (Format Parts Retrieval task) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención
  • Kisters - Line 2 (Format Parts Retrieval task) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Kisters - Line 2 (Format Parts Retrieval task) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención
  • Kisters - Line 5 (Format Parts Retrieval task) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Kisters - Line 5 (Format Parts Retrieval task) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención
  • Kisters - Line 6 (Format Parts Retrieval task) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Kisters - Line 1 (Adjustment Values / Slider Optimisation) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Kisters - Line 1 (Adjustment Values / Slider Optimisation) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención
  • Kisters - Cardboard Cutout Feeding Module (observed changeovers, Feb-May 2026, all lines) · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base
  • Line 1 Kisters · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención