foratvise
Comenzar
Estudio incluido

Improving Production Efficiency in a Chocolate SME through Continuous Flow, SMED and Poka-Yoke

Abrir fuente

1Ficha bibliográfica

Autores
Camila Panta-Mejia, Katya Pino-Ore, Gino Viacava-Campos, Jorge Antonio Corzo-Chávez
Año
2026
Publicación
International Conference on Industrial Engineering and Operations Management (IEOM)
País
Peru
Segmento
Azúcar y confitería
Familia de procesos
Formado, horneado y cocción
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · — máquinas
Periodo de observación
35 días
Recolección de datos
manual_logs
Intervención
Ver el contexto tal como lo describe el estudio
Artisanal plants continue to face recurring failures such as thermal variability during tempering, inaccurate filling of buffer tanks, reprocessing in molding, and excessive changeover times that compromise product quality and restrict productive capacity.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 7Riesgo alto
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
operational interruptions during mold changeovermold
Ver cita textual (Section 5.1, Improvement 1)
As-Is interruptions: 10 per week → 1 per week
Setups y ajustesNúmero de eventos10.0 events/weekAmbos extractores coincidieron
manual chocolate transferbuffer tank / transfer line
Ver cita textual (Section 5.1, Improvement 2)
Problem addressed: 180-minute manual transfer, temperature fluctuations, risk of spills, and WIP accumulation.
No clasificable a partir del reporteTiempo perdido180 minAdjudicado
—
Ver cita textual (Abstract)
The plant analyzed in this study operates at only 39.28% real efficiency, evidencing structural gaps in flow synchronization, standardization, and control of critical variables.
noneOEE39.3 %Ambos extractores coincidieron
operational interruptions during mold changeovermold
Ver cita textual (Section 5.2 (Operational records and timing, 5 weeks))
Week 5: 1 interruption
Setups y ajustesNúmero de eventos1.00 events/weekAmbos extractores coincidieron
overfillingbuffer tank
Ver cita textual (Section 5.1, Improvement 3)
Overfilling: 40% → 6%
Defectos de proceso (desecho y reproceso)Tasa de defectos40.0 %Ambos extractores coincidieron
operational interruptions during mold changeovermold
Ver cita textual (Section 5.2 (Operational records and timing, 5 weeks))
Week 1: 5 interruptions
Setups y ajustesNúmero de eventos5.00 events/weekUn solo extractor
operational interruptions during mold changeovermold
Ver cita textual (Figure 8 caption)
Weeks 2, 3, and 4 stabilized at three interruptions each, showing improved workflow continuity and reduced operational stops.
Setups y ajustesNúmero de eventos3.00 events/weekUn solo extractor
reprocessingbuffer tank / molding
Ver cita textual (Section 5.1, Improvement 3)
Reprocessing: 25% → 5%
Defectos de proceso (desecho y reproceso)Tasa de defectos25.0 %Un solo extractor
overfillingbuffer tank
Ver cita textual (Section 5.1, Improvement 3)
Overfilling: 40% → 6%
Defectos de proceso (desecho y reproceso)Tasa de defectos6.00 %Un solo extractor
reprocessingbuffer tank / molding
Ver cita textual (Section 5.1, Improvement 3)
Reprocessing: 25% → 5%
Defectos de proceso (desecho y reproceso)Tasa de defectos5.00 %Un solo extractor
thermal variability during tempering, inaccurate filling
Ver cita textual (Table 2, page 217)
Reprocessing overall | 25%
Defectos de proceso (desecho y reproceso)Tasa de defectos25.0 %Un solo extractor
reduced thermal variability, improved filling control
Ver cita textual (Table 2, page 217)
Reprocessing overall | 5%
Defectos de proceso (desecho y reproceso)Tasa de defectos5.00 %Un solo extractor

Unidades de observación

  • Mold changeover (SMED) · Formado, moldeado y dosificado · Línea base
  • Chocolate production line (whole process) · Línea completa o equipo sin especificar · Línea base
  • Mold changeover (SMED) · Formado, moldeado y dosificado · Después de la intervención
  • Buffer tank (tempering buffer) · Línea completa o equipo sin especificar · Línea base
  • Buffer tank (tempering buffer) · Línea completa o equipo sin especificar · Después de la intervención
  • Chocolate Production Plant · Línea completa o equipo sin especificar · Línea base
  • Chocolate Production Plant · Línea completa o equipo sin especificar · Después de la intervención