foratvise
Loslegen
Leerlauf und Kurzstillstände

Improper bag attachment to filling/packaging spout

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 53 % der Verlustzeit der Linie. Berichtet von 0 der 112 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

The bag or pouch is not correctly clipped, clamped or seated onto the filling spout or forming jaws, so it slips, misaligns or fails to open fully during the packaging cycle. This is usually caused by operator handling error, worn or misadjusted clamping/gripper hardware, or inconsistent bag dimensions, and forces the machine to stop before the cycle can continue.

Was man dagegen tut

Standardize operator training and visual aids for correct bag loading, and inspect or redesign clamps, grippers and spout guides to ensure consistent, repeatable attachment regardless of minor bag variability. Add sensor confirmation of proper bag seating before the cycle proceeds, with an interlock that halts the station and alerts the operator if attachment is not detected.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,4 % [0,1–1,1 %]
Erwarteter Anteil an der Verlustzeit
0,2 % [0,0–0,6 %]
Anteil an der Verlustzeit bei Auftreten
53 % [40–64 %]
Studien / Einheiten
112 / 155
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,4 % [0,0–1,7 %]14 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,4 % [0,0–1,3 %]33 Studien
  • Bier, Wein und Spirituosen
    0,4 % [0,0–1,5 %]14 Studien
  • Backwaren und Teigwaren
    0,4 % [0,0–1,6 %]6 Studien
  • Fleisch, Geflügel und Fisch
    0,4 % [0,0–1,7 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,4 % [0,0–1,8 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,4 % [0,0–1,8 %]4 Studien
  • Zucker und Süßwaren
    0,4 % [0,0–1,7 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,4 % [0,0–1,6 %]8 Studien
  • Futtermittel und Heimtiernahrung
    0,4 % [0,0–1,7 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,4 % [0,0–1,6 %]14 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The bag or pouch is not correctly clipped, clamped or seated onto the filling spout or forming jaws, so it slips, misaligns or fails to open fully during the packaging cycle. This is usually caused by operator handling error, worn or misadjusted clamping/gripper hardware, or inconsistent bag dimensions, and forces the machine to stop before the cycle can continue.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES logs show short machine-state stops at the bagging or filling station, often with a bag-detection or jaw-closed sensor fault flag, accompanied by low-duration downtime events clustered at that station without any maintenance work order. Counters for minor stops or jams at the packaging module rise while upstream conveying shows intermittent blocking.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Standardize operator training and visual aids for correct bag loading, and inspect or redesign clamps, grippers and spout guides to ensure consistent, repeatable attachment regardless of minor bag variability. Add sensor confirmation of proper bag seating before the cycle proceeds, with an interlock that halts the station and alerts the operator if attachment is not detected.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 16,0 h · laut Bericht: “Improper bag attachment”
    Wörtliches Zitat anzeigen
    bags stuck on conveyor Before packaging. Bags falling in machinery. Pallet flow issues. lmoroper bag attachment. Frequent stitching adjiustments. Hour 180 40 23 16 11 Cum % 67% 82% 90% 96% 100% 180 40 23 16 11