foratvise
Loslegen
Anlagenausfall (Störungen)

Carton Erector Equipment Failure

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 112 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Mechanical, pneumatic or electrical components of the carton erector, such as vacuum cups, grippers, flap-folding arms, glue heads or servo drives, wear, misalign or break, so the machine can no longer pick up a blank and fold it into a square carton. Because the fault requires manual intervention or parts replacement rather than a simple reset, the erector stops producing erected cartons until maintenance restores the function.

Was man dagegen tut

Apply preventive maintenance schedules covering vacuum cup and gripper condition, pneumatic circuit integrity, glue application system cleaning, and servo drive calibration, supported by spare-parts availability for fast-wear components. Install sensors for vacuum level, air pressure and glue temperature with early-warning alarms, and perform periodic alignment checks on the folding and gluing mechanisms to prevent the failure from recurring.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,6 % [0,1–1,5 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,9 %]
Anteil an der Verlustzeit bei Auftreten
57 % [45–68 %]
Studien / Einheiten
112 / 155
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,6 % [0,1–2,3 %]14 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,8 % [0,1–2,5 %]33 Studien
  • Bier, Wein und Spirituosen
    0,6 % [0,1–2,2 %]14 Studien
  • Backwaren und Teigwaren
    0,7 % [0,1–2,4 %]6 Studien
  • Fleisch, Geflügel und Fisch
    0,7 % [0,1–2,5 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,7 % [0,1–2,3 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,7 % [0,1–2,4 %]4 Studien
  • Zucker und Süßwaren
    0,7 % [0,1–2,5 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,6 % [0,1–2,4 %]8 Studien
  • Futtermittel und Heimtiernahrung
    0,7 % [0,1–2,5 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,6 % [0,1–2,3 %]14 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Mechanical, pneumatic or electrical components of the carton erector, such as vacuum cups, grippers, flap-folding arms, glue heads or servo drives, wear, misalign or break, so the machine can no longer pick up a blank and fold it into a square carton. Because the fault requires manual intervention or parts replacement rather than a simple reset, the erector stops producing erected cartons until maintenance restores the function.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

The erector transitions to a fault or down machine state with an equipment-specific alarm code (vacuum loss, servo overload, glue temperature, carton jam detected by a photoeye), and the stop duration exceeds the short-stop threshold logged by the MES. Downstream filling, capping or case-packing stations show starvation of erected cartons, while upstream flat-blank feeding accumulates or stalls, and the event is recorded under a maintenance work order rather than being auto-cleared by the operator.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Apply preventive maintenance schedules covering vacuum cup and gripper condition, pneumatic circuit integrity, glue application system cleaning, and servo drive calibration, supported by spare-parts availability for fast-wear components. Install sensors for vacuum level, air pressure and glue temperature with early-warning alarms, and perform periodic alignment checks on the folding and gluing mechanisms to prevent the failure from recurring.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 27,0 min · laut Bericht: “Carton Erector”
    Wörtliches Zitat anzeigen
    3 Carton Erector 27 8%
  2. Anteil an der Verlustzeit: 8,00 % · laut Bericht: “Carton Erector”
    Wörtliches Zitat anzeigen
    3 Carton Erector 27 8%