foratvise
Loslegen
Rüsten und Einstellen

Changeover retooling and team briefing downtime

Rüsten und EinstellenVerfügbarkeitGesamte Linie oder nicht spezifizierte Anlage

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Production stops while operators dismantle, exchange and refit tooling, guides, moulds or format parts to prepare the line for a different product or package, and while the shift or changeover team gathers for a briefing to align on the plan, safety points and roles before restarting. Both activities are scheduled, non-failure interruptions tied to the organisation of work around a changeover or shift start rather than to a breakdown of equipment.

Was man dagegen tut

Standardise and pre-stage changeover kits and tooling, use quick-change or tool-less fixtures, and apply SMED-style parallel task splitting to shorten retooling; schedule briefings to overlap with other unavoidable stoppages (such as warm-up or cleaning) rather than adding dedicated line-down time, and keep briefings short and structured with a fixed agenda.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,5 % [0,1–1,4 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,8 %]
Anteil an der Verlustzeit bei Auftreten
57 % [46–67 %]
Studien / Einheiten
127 / 161
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,6 % [0,1–2,1 %]13 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,5 % [0,1–1,8 %]26 Studien
  • Bier, Wein und Spirituosen
    0,6 % [0,1–2,1 %]11 Studien
  • Backwaren und Teigwaren
    0,5 % [0,1–1,9 %]24 Studien
  • Fleisch, Geflügel und Fisch
    0,8 % [0,1–3,0 %]9 Studien
  • Obst- und Gemüseverarbeitung
    0,6 % [0,1–2,3 %]7 Studien
  • Getreide- und Ölsaatenmüllerei
    0,6 % [0,1–2,2 %]6 Studien
  • Zucker und Süßwaren
    0,6 % [0,1–2,2 %]9 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,6 % [0,1–2,2 %]5 Studien
  • Futtermittel und Heimtiernahrung
    0,6 % [0,1–2,1 %]7 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,6 % [0,1–2,2 %]10 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Production stops while operators dismantle, exchange and refit tooling, guides, moulds or format parts to prepare the line for a different product or package, and while the shift or changeover team gathers for a briefing to align on the plan, safety points and roles before restarting. Both activities are scheduled, non-failure interruptions tied to the organisation of work around a changeover or shift start rather than to a breakdown of equipment.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

MES/SCADA shows the line in a changeover or stopped state with no fault alarm active, a logged changeover or downtime reason code of retooling or meeting type, and a flat production counter for the duration of the event; the state typically starts at a scheduled time such as shift start or a planned format switch and ends when the first unit after restart is logged.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Standardise and pre-stage changeover kits and tooling, use quick-change or tool-less fixtures, and apply SMED-style parallel task splitting to shorten retooling; schedule briefings to overlap with other unavoidable stoppages (such as warm-up or cleaning) rather than adding dedicated line-down time, and keep briefings short and structured with a fixed agenda.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 14,0 min · laut Bericht: “Team Briefing”
    Wörtliches Zitat anzeigen
    Team Briefing 4 10 14
  2. Verlustzeit: 5.602 h · laut Bericht: “retooling”
    Wörtliches Zitat anzeigen
    A look at Fig. 6 revelas that retooling consumed up to 23% of the overall working hours adding up to 5602 hours in 2014.
  3. Anteil an der geplanten Zeit: 23,0 % · laut Bericht: “retooling”
    Wörtliches Zitat anzeigen
    A look at Fig. 6 revelas that retooling consumed up to 23% of the overall working hours adding up to 5602 hours in 2014.