foratvise
Loslegen
Eingeschlossene Studie

A case study of VSM and SMED in the food processing industry

Quelle öffnen

1Bibliografische Angaben

Autoren
Malek Miguel Maalouf, Magdalena Zaduminska
Jahr
2019
Publikationsorgan
Management and Production Engineering Review
Land
Denmark
Segment
Fleisch, Geflügel und Fisch
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Einzelfallstudie
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · 1 Maschinen
Beobachtungszeitraum
365 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
Line 1 produces a family of products called “herring salad” in jars and plastic buckets, of two ˛ avors and di´erent sizes.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 11Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
retooling (two workers, parallel operations)Multi-Weight machine
Wörtliches Zitat anzeigen (Outcomes of SMED implementation section / Fig. 9)
The time of retooling was reduced from 17.5 minutes to 11.5 minutes.
Rüsten und EinstellenMittlere Ereignisdauer11,5 minBeide Extraktionen übereinstimmend
retooling (one worker)Multi-Weight machine
Wörtliches Zitat anzeigen (Implementation (future state) section / Fig. 9)
The total time of retooling using one worker (Current state in Fig. 9) is 17.5 minutes involving 9 activities (A,B,C,D,E,F,G,H,I).
Rüsten und EinstellenMittlere Ereignisdauer17,5 minBeide Extraktionen übereinstimmend
machine breakdowns
Wörtliches Zitat anzeigen (Changeover data analysis section / Fig. 5)
Changeovers consumed 536 hours (28%), while machine breakdowns totalled 485 hours (25%).
Anlagenausfall (Störungen)Anteil an der geplanten Zeit25,0 %Beide Extraktionen übereinstimmend
machine breakdowns
Wörtliches Zitat anzeigen (Changeover data analysis section / Fig. 5)
Changeovers consumed 536 hours (28%), while machine breakdowns totalled 485 hours (25%).
Anlagenausfall (Störungen)Verlustzeit485 hBeide Extraktionen übereinstimmend
changeovers
Wörtliches Zitat anzeigen (Changeover data analysis section / Fig. 5)
Changeovers consumed 536 hours (28%), while machine breakdowns totalled 485 hours (25%).
Rüsten und EinstellenAnteil an der geplanten Zeit28,0 %Beide Extraktionen übereinstimmend
changeovers
Wörtliches Zitat anzeigen (Changeover data analysis section / Fig. 5)
Changeovers consumed 536 hours (28%), while machine breakdowns totalled 485 hours (25%).
Rüsten und EinstellenVerlustzeit536 hBeide Extraktionen übereinstimmend
retooling
Wörtliches Zitat anzeigen (Changeover data analysis section / Fig. 6)
A look at Fig. 6 revelas that retooling consumed up to 23% of the overall working hours adding up to 5602 hours in 2014.
Rüsten und EinstellenVerlustzeit5.602 hBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Changeover data analysis section / Fig. 5)
In 2014, out of a total of 1928 hours available in the year, the real production time of line L1 was 907 hours (47%).
noneVerfügbarkeit47,0 %Einfache Extraktion
retooling
Wörtliches Zitat anzeigen (Changeover data analysis section / Fig. 6)
A look at Fig. 6 revelas that retooling consumed up to 23% of the overall working hours adding up to 5602 hours in 2014.
Rüsten und EinstellenAnteil an der geplanten Zeit23,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Page 6, Outcomes of SMED implementation section)
The reduction of changeover time of Line 1 (producing 84% of total production) generated increase of ca. 11% of the production capacity (kg/h) of the L1 in 2016 (Fig. 10).
noneDurchsatz11,0 %Einfache Extraktion

Beobachtungseinheiten

  • Multi-Weight machine · Abfüllen · Nach der Intervention
  • Multi-Weight machine · Abfüllen · Ausgangslage
  • Line L1 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Line 1 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention