foratvise
Loslegen
Rüsten und Einstellen

Equipment installation time during changeover

Rüsten und EinstellenVerfügbarkeitGesamte Linie oder nicht spezifizierte Anlage

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 0 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Production stops while new tooling, modules, or line equipment are physically mounted, connected and aligned before the next run can begin. This installation work is a required step within the changeover sequence and adds non-productive time on top of the strict product-to-product switch, especially when new or pilot equipment must be fitted into the existing line.

Was man dagegen tut

Standardize installation procedures with pre-staged modules, quick-connect fixtures and checklists to shorten mounting and alignment steps, and plan installation work during scheduled non-production windows whenever possible. Track installation time as a distinct changeover sub-component to identify design or logistics improvements that reduce it over successive installations.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,3 % [0,1–1,0 %]
Erwarteter Anteil an der Verlustzeit
0,2 % [0,0–0,6 %]
Anteil an der Verlustzeit bei Auftreten
56 % [44–67 %]
Studien / Einheiten
127 / 161
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,4 % [0,0–1,5 %]13 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,4 % [0,0–1,3 %]26 Studien
  • Bier, Wein und Spirituosen
    0,4 % [0,0–1,5 %]11 Studien
  • Backwaren und Teigwaren
    0,4 % [0,0–1,4 %]24 Studien
  • Fleisch, Geflügel und Fisch
    0,4 % [0,0–1,6 %]9 Studien
  • Obst- und Gemüseverarbeitung
    0,4 % [0,0–1,5 %]7 Studien
  • Getreide- und Ölsaatenmüllerei
    0,4 % [0,0–1,5 %]6 Studien
  • Zucker und Süßwaren
    0,4 % [0,0–1,5 %]9 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,4 % [0,0–1,5 %]5 Studien
  • Futtermittel und Heimtiernahrung
    0,4 % [0,0–1,4 %]7 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,4 % [0,0–1,5 %]10 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Production stops while new tooling, modules, or line equipment are physically mounted, connected and aligned before the next run can begin. This installation work is a required step within the changeover sequence and adds non-productive time on top of the strict product-to-product switch, especially when new or pilot equipment must be fitted into the existing line.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

MES/SCADA shows an extended changeover or downtime state with no production counts, often logged under a maintenance or engineering work order rather than a standard format-change code; the line state duration is longer and more variable than routine changeovers and recurs on a monthly or project basis rather than per batch.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Standardize installation procedures with pre-staged modules, quick-connect fixtures and checklists to shorten mounting and alignment steps, and plan installation work during scheduled non-production windows whenever possible. Track installation time as a distinct changeover sub-component to identify design or logistics improvements that reduce it over successive installations.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 31,2 not reported · laut Bericht: “Average Monthly installation time (2021)”
    Wörtliches Zitat anzeigen
    Month 1 31.17 22 18.5 41%
  2. Verlustzeit: 18,5 not reported · laut Bericht: “Pilot test average monthly installation time”
    Wörtliches Zitat anzeigen
    Month 1 31.17 22 18.5 41%