foratvise
Loslegen
Eingeschlossene Studie

Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies

Quelle öffnen

1Bibliografische Angaben

Autoren
Sair Castañeda, Sharon Rodriguez, Orkun Yildiz, Duilio Aranda, José C. Alvarez
Jahr
2024
Publikationsorgan
Social Science Research Network
Land
Peru
Segment
Zucker und Süßwaren
Prozessfamilie
Formen, Backen und Garen
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · 2 Maschinen
Beobachtungszeitraum
60 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
The company under study belongs to the food industry in Lima, Peru. It has five production lines: Chocolate Line, Confectionery, Instant Products, Cereals and Milling.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 10Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%.0 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—
Wörtliches Zitat anzeigen (Conclusion)
resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance)
Anlagenausfall (Störungen)Mittlere Ereignisdauer8,72 hBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Conclusion)
resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance)
Anlagenausfall (Störungen)Zeit zwischen Ereignissen34,9 hBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Discussion (Section 5))
availability increases by 12.10%; initially, this parameter presented a percentage of 79.06%, and after the implementation, a value equal to 89.37% was obtained.
noneVerfügbarkeit89,4 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Conclusion)
resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance)
Anlagenausfall (Störungen)Mittlere Ereignisdauer7,72 hBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Conclusion)
resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance)
Anlagenausfall (Störungen)Zeit zwischen Ereignissen29,2 hBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 4.1)
a gap in machinery availability has been identified, with the company under study reporting a value of 79.06%; however, the industry reflects that the value is acceptable greater than 90%.
noneVerfügbarkeit79,1 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 3.3.3)
Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%); and it is intended to reach an equal value of 85.02%
noneQualität95,2 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 3.3.3)
Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%); and it is intended to reach an equal value of 85.02%
noneLeistung94,9 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 1)
OEE 78.05% 90.00% 11.95 pp
noneOEE78,1 %Beide Extraktionen übereinstimmend
Internal activities time (final)
Wörtliches Zitat anzeigen (Section 4.3.2 Phase 4)
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
Rüsten und EinstellenVerlustzeit25,6 minBeide Extraktionen übereinstimmend
Hours of preventive maintenance (scheduled), Month 2
Wörtliches Zitat anzeigen (Table 7)
Month 2 12.00 20.00 8.00
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit12,0 hBeide Extraktionen übereinstimmend
Hours of preventive maintenance (scheduled), Month 1
Wörtliches Zitat anzeigen (Table 7)
Month 1 14.00 25.00 11.00
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit14,0 hBeide Extraktionen übereinstimmend
Hours of factual preventive maintenance, Month 2
Wörtliches Zitat anzeigen (Table 7)
Month 2 12.00 20.00 8.00
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit20,0 hBeide Extraktionen übereinstimmend
Hours of factual preventive maintenance, Month 1
Wörtliches Zitat anzeigen (Table 7)
Month 1 14.00 25.00 11.00
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit25,0 hBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 3.3.3)
Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%); and it is intended to reach an equal value of 85.02%
noneOEE70,5 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Section 3.3.3)
Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%); and it is intended to reach an equal value of 85.02%
noneVerfügbarkeit78,1 %Einfache Extraktion
Average Monthly installation time (2021)
Wörtliches Zitat anzeigen (Table 8)
Month 1 31.17 22 18.5 41%
Rüsten und EinstellenVerlustzeit31,2 not reportedEinfache Extraktion
Total production time of changeover activities
Wörtliches Zitat anzeigen (Table 4)
147.54 15 23 63.22 84.32
Rüsten und EinstellenVerlustzeit148 minEinfache Extraktion
Internal activities
Wörtliches Zitat anzeigen (Table 4)
147.54 15 23 63.22 84.32
Rüsten und EinstellenAnzahl der Ereignisse15,0 eventsEinfache Extraktion
External activities
Wörtliches Zitat anzeigen (Table 4)
147.54 15 23 63.22 84.32
Rüsten und EinstellenAnzahl der Ereignisse23,0 eventsEinfache Extraktion
Internal activities time
Wörtliches Zitat anzeigen (Table 4)
147.54 15 23 63.22 84.32
Rüsten und EinstellenVerlustzeit63,2 minEinfache Extraktion
External activities time
Wörtliches Zitat anzeigen (Table 4)
147.54 15 23 63.22 84.32
Rüsten und EinstellenVerlustzeit84,3 minEinfache Extraktion
Pilot test average monthly installation time
Wörtliches Zitat anzeigen (Table 8)
Month 1 31.17 22 18.5 41%
Rüsten und EinstellenVerlustzeit18,5 not reportedEinfache Extraktion
Final process time after SMED implementation
Wörtliches Zitat anzeigen (Section 4.3.2 Phase 4)
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
Rüsten und EinstellenVerlustzeit106 minEinfache Extraktion
External activities (final)
Wörtliches Zitat anzeigen (Section 4.3.2 Phase 4)
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
Rüsten und EinstellenAnzahl der Ereignisse25,0 eventsEinfache Extraktion
External activities time (final)
Wörtliches Zitat anzeigen (Section 4.3.2 Phase 4)
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
Rüsten und EinstellenVerlustzeit80,1 minEinfache Extraktion
Extra hours, Month 1
Wörtliches Zitat anzeigen (Table 7)
Month 1 14.00 25.00 11.00
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit11,0 hEinfache Extraktion
Extra hours, Month 2
Wörtliches Zitat anzeigen (Table 7)
Month 2 12.00 20.00 8.00
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit8,00 hEinfache Extraktion
Breakdowns in the Machinery
Wörtliches Zitat anzeigen (Table 9)
Breakdowns in the Machinery | 12.20% | 39.25%
Anlagenausfall (Störungen)Anteil an den Verlustereignissen12,2 %Einfache Extraktion
Breakdowns due to human errors in calibration or operation
Wörtliches Zitat anzeigen (Table 9)
Breakdowns due to human errors in calibration or operation | 8.47% | 38.38%
Leerlauf und KurzstillständeAnteil an den Verlustereignissen8,47 %Einfache Extraktion

Beobachtungseinheiten

  • Confectionery line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Confectionery line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage