Equipment down under repair
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 2 der 127 Studien, die sie beobachten konnten (begrenzte Evidenz).
Was passiert
A machine or line has failed and remains stopped while maintenance technicians diagnose and repair the fault; the duration of the stop depends on fault complexity, spare parts availability and technician response time rather than on the original failure itself. Extended repair durations occur when diagnosis is difficult, parts must be sourced, or multiple sub-systems are affected.
Was man dagegen tut
Apply structured root-cause diagnosis tools and maintain critical spare parts inventory to shorten repair cycles, and track mean time to repair by fault type to identify and address recurring bottlenecks in the repair process.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,8 % [0,2–2,0 %]
- Erwarteter Anteil an der Verlustzeit
- 0,4 % [0,1–1,1 %]
- Anteil an der Verlustzeit bei Auftreten
- 56 % [45–66 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- C
Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,9 % [0,1–2,9 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,1 % [0,1–3,2 %]26 Studien
- Bier, Wein und Spirituosen1,3 % [0,2–4,4 %]11 Studien
- Backwaren und Teigwaren0,8 % [0,1–2,5 %]24 Studien
- Fleisch, Geflügel und Fisch0,9 % [0,1–3,2 %]9 Studien
- Obst- und Gemüseverarbeitung0,9 % [0,1–3,2 %]7 Studien
- Getreide- und Ölsaatenmüllerei0,9 % [0,1–3,1 %]6 Studien
- Zucker und Süßwaren0,9 % [0,1–3,1 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,9 % [0,1–3,1 %]5 Studien
- Futtermittel und Heimtiernahrung0,9 % [0,1–3,1 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,9 % [0,1–3,1 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseA machine or line has failed and remains stopped while maintenance technicians diagnose and repair the fault; the duration of the stop depends on fault complexity, spare parts availability and technician response time rather than on the original failure itself. Extended repair durations occur when diagnosis is difficult, parts must be sourced, or multiple sub-systems are affected.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES shows a sustained machine-down or fault state with no cycling of actuators, often tagged with a maintenance-call or work-order event; the stop duration counter extends well beyond typical fault-clear times, and upstream/downstream equipment shows blocking or starvation states for the same period.
Gegenmaßnahme
Ingenieurpraktische HinweiseApply structured root-cause diagnosis tools and maintain critical spare parts inventory to shorten repair cycles, and track mean time to repair by fault type to identify and address recurring bottlenecks in the repair process.
4Quellen
- Reliability and maintainability analysis to improve the operation of the limoncello production line (2012)Quelle öffnenAnteil an der Verlustzeit: 10,7 % · laut Bericht: “under repair”
Wörtliches Zitat anzeigen
whereas for the rest 10.65%, the LPL is under repair
- Evaluation of reliability, availability and maintainability of a milk production line (2019)Quelle öffnenAnteil an der Verlustzeit: 3,90 % · laut Bericht: “down or under repair”
Wörtliches Zitat anzeigen
the availability for the milk production line was 96.13% and the line was down or under repair for 3.9%
- Enhancing Operational Effectiveness in a Beverage Bottling SME through SMED, 5S, and TPM Maintenance Practices (2025)Quelle öffnenAnteil an der Verlustzeit: 34,0 % · laut Bericht: “protracted repair durations”
Wörtliches Zitat anzeigen
Detailed decomposition of the shortfall reveals that parasitic machine velocity losses exert a 47% share on ineffective output, protracted repair durations 34%, and the necessity for product reprocessing 19%.

