Eingeschlossene Studie
Enhancing Operational Effectiveness in a Beverage Bottling SME through SMED, 5S, and TPM Maintenance Practices
1Bibliografische Angaben
- Autoren
- Diana Stella Rossi-Huamán, Billy Manfred Tecse-Villacorta, Richard Nicholas Meza-Ortiz
- Jahr
- 2025
- Publikationsorgan
- International Journal of Industrial Engineering
- Land
- Peru
- Segment
- Erfrischungsgetränke, abgefülltes Wasser und Säfte
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · — Maschinen
- Beobachtungszeitraum
- 120 Tage
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
The company specializes in the production and commercialization of carbonated and energy drinks, sustaining more than twelve years of market presence.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 11Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Wörtliches Zitat anzeigen (Section 4.3.4 TPM: Enhancing Reliability through Preventive and Autonomous Maintenance)Overall Equipment Effectiveness (OEE) rose from 61% to 79%, and the defect rate experienced a 22% contraction. | none | OEE | 79,0 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section 4.3.4 TPM: Enhancing Reliability through Preventive and Autonomous Maintenance)Overall Equipment Effectiveness (OEE) rose from 61% to 79%, and the defect rate experienced a 22% contraction. | none | OEE | 61,0 % | Beide Extraktionen übereinstimmend |
the necessity for product reprocessingWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)Detailed decomposition of the shortfall reveals that parasitic machine velocity losses exert a 47% share on ineffective output, protracted repair durations 34%, and the necessity for product reprocessing 19%. | Prozessfehler (Ausschuss und Nacharbeit) | Anteil an der Verlustzeit | 19,0 % | Beide Extraktionen übereinstimmend |
protracted repair durationsWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)Detailed decomposition of the shortfall reveals that parasitic machine velocity losses exert a 47% share on ineffective output, protracted repair durations 34%, and the necessity for product reprocessing 19%. | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 34,0 % | Beide Extraktionen übereinstimmend |
parasitic machine velocity lossesWörtliches Zitat anzeigen (Section 4.2 Initial Diagnosis)Detailed decomposition of the shortfall reveals that parasitic machine velocity losses exert a 47% share on ineffective output, protracted repair durations 34%, and the necessity for product reprocessing 19%. | Verringerte Geschwindigkeit | Anteil an der Verlustzeit | 47,0 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 2. Validation Results of the Lean-TPM Maintenance Model)Effectiveness % 68% 95% 90% 32.35% | none | Leistung | 68,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 2. Validation Results of the Lean-TPM Maintenance Model)Effectiveness % 68% 95% 90% 32.35% | none | Leistung | 90,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.3.4)The Mean Time Between Failures (MTBF) increased by 31% | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 31,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.3.4)The Mean Time to Repair (MTTR) decreased by 25% | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | -25,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.3.4)The incidence of breakdowns decreased by 68% | Anlagenausfall (Störungen) | Anzahl der Ereignisse | -68,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.3.4)the defect rate experienced a 22% contraction | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | -22,0 % | Einfache Extraktion |
Beobachtungseinheiten
- SME bottling line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
- SME bottling line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Bottling line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention

