Filling and closure defects (underfill, uncrowned, contamination)
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 49 % der Verlustzeit der Linie. Berichtet von 1 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
During the filling and crowning sequence, deviations in fill-valve dosing or level sensing leave bottles below the target fill height, while misalignment or malfunction of the crowning head leaves containers without a properly seated closure. Open or improperly closed containers passing through the line can also pick up foreign matter or microbial contamination before the closure seats.
Was man dagegen tut
Calibrate and periodically verify fill-valve dosing and level sensors, and maintain crowning head alignment, torque and feed timing through preventive maintenance. Reinforce sanitary barriers, air curtains and container handling to minimize exposure of open containers to contamination sources.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,5 % [0,1–1,5 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–0,7 %]
- Anteil an der Verlustzeit bei Auftreten
- 49 % [38–61 %]
- Studien / Einheiten
- 120 / 162
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,1–2,2 %]18 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,7 % [0,1–2,1 %]44 Studien
- Bier, Wein und Spirituosen0,6 % [0,1–2,1 %]16 Studien
- Backwaren und Teigwaren0,7 % [0,1–2,6 %]0 Studien
- Fleisch, Geflügel und Fisch0,6 % [0,1–2,4 %]6 Studien
- Obst- und Gemüseverarbeitung0,6 % [0,1–2,4 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,1–2,3 %]6 Studien
- Zucker und Süßwaren0,6 % [0,1–2,4 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,1–2,3 %]6 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,1–2,6 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,6 % [0,1–2,3 %]13 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseDuring the filling and crowning sequence, deviations in fill-valve dosing or level sensing leave bottles below the target fill height, while misalignment or malfunction of the crowning head leaves containers without a properly seated closure. Open or improperly closed containers passing through the line can also pick up foreign matter or microbial contamination before the closure seats.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseFill-level or weight readings trending below the lower control limit on the filler, combined with crowner reject or jam counters rising and inspection/checkweigher reject rates spiking for the same batch window. Correlated alarms on filler valve timing and crowner torque or position sensors help pinpoint the source machine.
Gegenmaßnahme
Ingenieurpraktische HinweiseCalibrate and periodically verify fill-valve dosing and level sensors, and maintain crowning head alignment, torque and feed timing through preventive maintenance. Reinforce sanitary barriers, air curtains and container handling to minimize exposure of open containers to contamination sources.
4Quellen
- Technical Analysis and Solutions to Reduce Scrap Rate In Liquid Filler Machine: Case Study: In Moha Soft Drink Production Line (2025)Quelle öffnenAnteil an den Verlustereignissen: 88,1 % · laut Bericht: “underfill, uncrowned bottles, and contamination”
Wörtliches Zitat anzeigen
Pareto analysis revealed underfilling, uncrowned bottles, and contamination as the top contributors to scrap, accounting for 88.1% of total rejects.

