foratvise
Loslegen
Eingeschlossene Studie

Technical Analysis and Solutions to Reduce Scrap Rate In Liquid Filler Machine: Case Study: In Moha Soft Drink Production Line

Quelle öffnen

1Bibliografische Angaben

Autoren
Samuel Berhe Gebremedhin, Goytom Desta Gebreyesus, Misgna Arefaine Gebreabzgi
Jahr
2025
Publikationsorgan
Research Square
Land
Ethiopia
Segment
Erfrischungsgetränke, abgefülltes Wasser und Säfte
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Einzelfallstudie
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · 1 Maschinen
Beobachtungszeitraum
120 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
This study focuses on the filler machine at the Moha Soft Drink Factory in Mekelle, where scrap accounts for approximately 3.85% of production, thereby reducing profitability.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 11Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—Filler machine
Wörtliches Zitat anzeigen (Section 1 Introduction)
The company targets a production yield of 98.5%, yet actual operations show an average monthly scrap rate of about 3.85%.
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote3,85 %Beide Extraktionen übereinstimmend
Out of space
Wörtliches Zitat anzeigen (Section 4.1 / Table 2)
Full breakage and out-of-space defects were less common, contributing 4,518 and 1,296 cases, respectively, across the study period.
Prozessfehler (Ausschuss und Nacharbeit)Anzahl der Ereignisse1.296 casesBeide Extraktionen übereinstimmend
Full breakage
Wörtliches Zitat anzeigen (Section 4.1 / Table 2)
Full breakage and out-of-space defects were less common, contributing 4,518 and 1,296 cases, respectively, across the study period.
Prozessfehler (Ausschuss und Nacharbeit)Anzahl der Ereignisse4.518 casesBeide Extraktionen übereinstimmend
Contaminated
Wörtliches Zitat anzeigen (Section 4.1 / Table 2)
Among these, underfill defects were the most frequent, with a total of 20,598 cases, followed by uncrowned bottles with 14,508 cases, and contamination with 8,124 cases.
Prozessfehler (Ausschuss und Nacharbeit)Anzahl der Ereignisse8.124 casesBeide Extraktionen übereinstimmend
UncrownedCrowner (crowning system)
Wörtliches Zitat anzeigen (Section 4.1 / Table 2)
Among these, underfill defects were the most frequent, with a total of 20,598 cases, followed by uncrowned bottles with 14,508 cases, and contamination with 8,124 cases.
Prozessfehler (Ausschuss und Nacharbeit)Anzahl der Ereignisse14.508 casesBeide Extraktionen übereinstimmend
Under fillFiller machine (filling valve, piston)
Wörtliches Zitat anzeigen (Section 4.1 / Table 2)
Among these, underfill defects were the most frequent, with a total of 20,598 cases, followed by uncrowned bottles with 14,508 cases, and contamination with 8,124 cases.
Prozessfehler (Ausschuss und Nacharbeit)Anzahl der Ereignisse20.598 casesBeide Extraktionen übereinstimmend
Total scrap
Wörtliches Zitat anzeigen (Table 2)
Total | 20598 | 14508 | 8124 | 4518 | 1296 | 49044
Aus dem Bericht nicht klassifizierbarAnzahl der Ereignisse49.044 casesEinfache Extraktion
—
Wörtliches Zitat anzeigen (Section 4.1)
Underfill, uncrowned, and contamination together accounted for 88.1% of all scrap, confirming that these are the most critical defects in the production line.
Aus dem Bericht nicht klassifizierbarAnteil an den Verlustereignissen88,1 %Einfache Extraktion
underfill, uncrowned bottles, and contamination
Wörtliches Zitat anzeigen (Abstract and Section 4.1)
Pareto analysis revealed underfilling, uncrowned bottles, and contamination as the top contributors to scrap, accounting for 88.1% of total rejects.
Prozessfehler (Ausschuss und Nacharbeit)Anteil an den Verlustereignissen88,1 %Einfache Extraktion

Beobachtungseinheiten

  • Filler machine - Moha Soft Drink Factory · Abfüllen · Ausgangslage
  • Liquid Filler Machine · Abfüllen · Ausgangslage