foratvise
Loslegen
Anlagenausfall (Störungen)

Filling valve malfunction

Anlagenausfall (Störungen)VerfügbarkeitAbfüllen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 58 % der Verlustzeit der Linie. Berichtet von 2 der 120 Studien, die sie beobachten konnten (begrenzte Evidenz).

Was passiert

Wear, clogging, misalignment or seal degradation in the filling valve prevents it from opening, closing or metering correctly, which stops the valve station or lets it dispense less product than the target dose. The same underlying mechanical degradation that triggers a valve fault can, before it fully fails, manifest as an underfilled container because the dosing element does not seat or actuate properly.

Was man dagegen tut

Apply a preventive maintenance and replacement schedule for valve seals, gaskets and wear components, including periodic calibration and leak/flow checks per head. Use condition monitoring on valve actuation signals and fill-weight trends to trigger maintenance before the degradation produces either a stoppage or systematic underfill.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,7 % [0,2–1,8 %]
Erwarteter Anteil an der Verlustzeit
0,4 % [0,1–1,0 %]
Anteil an der Verlustzeit bei Auftreten
58 % [47–67 %]
Studien / Einheiten
120 / 162
Evidenzgrad
C

Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,8 % [0,1–2,6 %]18 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    1,1 % [0,2–3,1 %]44 Studien
  • Bier, Wein und Spirituosen
    0,8 % [0,1–2,6 %]16 Studien
  • Backwaren und Teigwaren
    0,9 % [0,1–3,4 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,8 % [0,1–2,8 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,9 % [0,1–3,0 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,8 % [0,1–2,9 %]6 Studien
  • Zucker und Süßwaren
    0,8 % [0,1–3,0 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,8 % [0,1–2,9 %]6 Studien
  • Futtermittel und Heimtiernahrung
    0,9 % [0,1–3,0 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,8 % [0,1–3,0 %]13 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Wear, clogging, misalignment or seal degradation in the filling valve prevents it from opening, closing or metering correctly, which stops the valve station or lets it dispense less product than the target dose. The same underlying mechanical degradation that triggers a valve fault can, before it fully fails, manifest as an underfilled container because the dosing element does not seat or actuate properly.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES shows discrete valve fault or error alarms tied to a specific head or station ID, abnormal valve open/close cycle times, and equipment-failure downtime logged against the filler. In parallel, fill-weight or level sensors and checkweighers register low-fill rejects correlated with the same valve position, sometimes without a stop being logged if the defect is caught only downstream.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Apply a preventive maintenance and replacement schedule for valve seals, gaskets and wear components, including periodic calibration and leak/flow checks per head. Use condition monitoring on valve actuation signals and fill-weight trends to trigger maintenance before the degradation produces either a stoppage or systematic underfill.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 655 min · laut Bericht: “filling valve”
    Wörtliches Zitat anzeigen
    filling valve 27 655 64 1835 57.14 52.19
  2. Anzahl der Ereignisse: 27,0 events · laut Bericht: “filling valve”
    Wörtliches Zitat anzeigen
    filling valve 27 655 64 1835 57.14 52.19
  3. Zeit zwischen Ereignissen: 41.694 not reported · laut Bericht: “Filling Valve”
    Wörtliches Zitat anzeigen
    Waktu Kerusakan Weibull MTTF 41693,58
  4. Mittlere Ereignisdauer: 107 not reported · laut Bericht: “Filling Valve”
    Wörtliches Zitat anzeigen
    Waktu Perbaikan Weibull MTTR 107
  5. Anzahl der Ereignisse: 20.598 cases · laut Bericht: “Under fill”
    Wörtliches Zitat anzeigen
    Among these, underfill defects were the most frequent, with a total of 20,598 cases, followed by uncrowned bottles with 14,508 cases, and contamination with 8,124 cases.