foratvise
Loslegen
Leerlauf und Kurzstillstände

Gauge roller jam or material buildup

Leerlauf und KurzstillständeLeistungFormen, Gießen und Dosieren

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 53 % der Verlustzeit der Linie. Berichtet von 0 der 76 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

The gauge roller, which sets the thickness of the dough or sheet by compressing it between rolls, accumulates sticky product residue or encounters an oversized lump of material that jams the nip or throws off the roller gap. The resulting obstruction stalls the sheet feed and triggers an automatic stop or requires the operator to clear the roller before production can resume.

Was man dagegen tut

Implement scheduled cleaning or scraping of the gauge roller surface to prevent sticky buildup, and install upstream screening or lump detection to remove oversized material before it reaches the rollers. Adjusting roller gap tolerances and using non-stick coatings or surface treatments also reduces jam frequency.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,4 % [0,1–1,3 %]
Erwarteter Anteil an der Verlustzeit
0,2 % [0,0–0,7 %]
Anteil an der Verlustzeit bei Auftreten
53 % [41–64 %]
Studien / Einheiten
76 / 96
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,5 % [0,0–2,1 %]5 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,5 % [0,0–1,9 %]11 Studien
  • Bier, Wein und Spirituosen
    0,5 % [0,0–2,3 %]0 Studien
  • Backwaren und Teigwaren
    0,4 % [0,0–1,7 %]25 Studien
  • Fleisch, Geflügel und Fisch
    0,5 % [0,0–2,1 %]3 Studien
  • Obst- und Gemüseverarbeitung
    0,5 % [0,0–2,1 %]3 Studien
  • Getreide- und Ölsaatenmüllerei
    0,5 % [0,0–2,1 %]0 Studien
  • Zucker und Süßwaren
    0,5 % [0,0–2,0 %]8 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,5 % [0,0–2,0 %]7 Studien
  • Futtermittel und Heimtiernahrung
    0,5 % [0,0–2,0 %]6 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,5 % [0,0–1,9 %]8 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The gauge roller, which sets the thickness of the dough or sheet by compressing it between rolls, accumulates sticky product residue or encounters an oversized lump of material that jams the nip or throws off the roller gap. The resulting obstruction stalls the sheet feed and triggers an automatic stop or requires the operator to clear the roller before production can resume.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

Short-duration stop events logged at the forming/sheeting station, often with the roller drive showing a torque or current spike just before the stop, followed by a brief idle state cleared manually by the operator without a maintenance work order. Downstream equipment may show starvation during the stop.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Implement scheduled cleaning or scraping of the gauge roller surface to prevent sticky buildup, and install upstream screening or lump detection to remove oversized material before it reaches the rollers. Adjusting roller gap tolerances and using non-stick coatings or surface treatments also reduces jam frequency.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 3,00 min · laut Bericht: “Gauge Roller”
    Wörtliches Zitat anzeigen
    Gauge Roller 1 2 3