foratvise
Loslegen
Formen, Backen und Garen

Formen, Gießen und Dosieren

Volumetric dividing, rounding and moulding of bread dough

Validiertes ModellOEE-Grenze 0,958 [0,938–0,978]20.000 Monte-Carlo-Stichproben · Seed 20261115 · berechnet am 16. November 2026

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Formen, Gießen und Dosieren kann höchstens 96 von je 100 geplanten Stunden nutzen. Der Rest entfällt auf Grenzen, die kein Werk vermeiden kann.

  1. 96höchstens nutzbar
  2. 4sind physikalische Grenze

Die drei Grenzen, die das festlegen

Laufzeit: bis 96 %

Der Rest sind Stillstände, die Physik oder Vorschrift erzwingen: Reinigung, Umrüsten, Abtauen.

Geschwindigkeit: bis 100 %

Wie nah an ihrer Höchstgeschwindigkeit sie laufen kann, ohne Produkt oder Anlage zu schädigen.

Gutprodukt: bis 100 %

Ein Teil des Produkts liegt auch bei gut beherrschtem Prozess außerhalb der Spezifikation.

Das technische Detail ansehen

Technisches Detail

Unsicherheitsintervalle, physikalische Modelle je Station und Quellen, für alle, die jede Zahl prüfen möchten.

1Szenario

Mixed wheat dough is tipped into the hopper of a volumetric divider whose pockets cut pieces of fixed volume; the pieces are rounded, rested and moulded into pans and then proofed and baked into prepackaged loaves of 800 g nominal weight (the loaf of the baking model). The divider meters volume, not mass: the piece mass scatters with the divider and drifts as the dough keeps fermenting in the hopper while a batch is divided. The legal rules for prepackages fix the smallest mean dough mass that keeps the loaves legal; pieces that would make a loaf short by more than twice the tolerable error are removed at the check-weigher and returned to the hopper. The same ceilings are applied as an approximation to the depositing and moulding of other doughs and batters sold by weight (derivation, section 7).

Herkunft der EingangsgrößenBerechnet1Deklarierte Annahme11Verifiziertes Zitat5

2Ergebnisse

Punktwert aus den Nominalparametern und 95-%-Intervall aus 20.000 Monte-Carlo-Ziehungen der unsicheren Parameter.
  • TheoretischThermodynamic minimum energy per kg of dough (no chemical change, deformation work recoverable in the reversible limit)0 kJ/kg
  • Time to divide one hopper batch at the installed rate3,37 [1,52–6,82] min
  • Standard deviation of the piece mass from the density drift during a batch0,866 [0,326–2,715] g
  • Standard deviation of the dough piece mass (divider scatter and density drift)6,06 [3,35–9,91] g
  • Standard deviation of the loaf weight carried over from forming5,48 [3,02–9,00] g
  • Smallest legal mean loaf weight for the forming scatter804,7 [802,5–806,9] g
  • Target mean mass of the dough piece891 [855–928] g
  • Overweight given away above the nominal quantity0,00582 [0,00307–0,00862]
  • Share of loaves with a deficiency beyond the tolerable negative error (allowed up to 2.5 %)1,66 × 10⁻⁴ [2,29 × 10⁻¹¹–1,86 × 10⁻²]
  • Share of dough pieces rejected at the check-weigher (loaf would have a T2 error)1,24 × 10⁻¹⁰ [9,27 × 10⁻³¹–7,67 × 10⁻⁵]
  • TheoretischMaximum OEE quality factor1,000000 [0,999923–1,000000]
  • TheoretischMaximum yield: nominal quantity sold per mean quantity made (give-away; rejected dough is reworked)0,9942 [0,9915–0,9969]
  • Dough pieces per hour of the installed divider (declared, no ceiling)6.000 [3.713–8.283] 1/h
  • Dough throughput of the installed divider (declared, no ceiling)5.345 [3.312–7.415] kg/h
  • TheoretischMaximum availability (daily cleaning of divider, rounder and moulder)0,958 [0,938–0,978]
  • TheoretischMaximum performance factor (no physical rate limit binding)1,00
  • TheoretischPhysics-bounded OEE0,958 [0,938–0,978]

3Obergrenzen je Dimension

Jede Dimension zeigt die vom Modell berechneten Obergrenzen und, bei vergleichbaren Einheiten, dokumentierte Vergleichswerte. Farbe und Markerform kennzeichnen den Grenztyp im gesamten Orakel.
  • Theoretisch
  • Beste verfügbare Technik
  • Best dokumentiert
  • Typisch
Energie je ProdukteinheitkJ/kg · niedriger ist besser
  • TheoretischThermodynamic minimum energy per kg of dough (no chemical change, deformation work recoverable in the reversible limit)0 kJ/kg
  • TheoretischDOE bandwidth study: products without significant chemical reactions have a zero thermodynamic minimum (dough forming is not covered by the study; the principle applies) · Vergleichswert0 kJ/kg
Qualitäthöher ist besser
  • TheoretischMaximum OEE quality factor1,000000 [0,999923–1,000000]
Ausbeutehöher ist besser
  • TheoretischMaximum yield: nominal quantity sold per mean quantity made (give-away; rejected dough is reworked)0,9942 [0,9915–0,9969]
Verfügbarkeithöher ist besser
  • TheoretischMaximum availability (daily cleaning of divider, rounder and moulder)0,958 [0,938–0,978]
Leistunghöher ist besser
  • TheoretischMaximum performance factor (no physical rate limit binding)1,00
OEEhöher ist besser
  • TheoretischPhysics-bounded OEE0,958 [0,938–0,978]

4Verlustkaskade

Was jede Obergrenze von der nächsten trennt, von der physikalischen Grenze bis zum typischen Betrieb.
  1. TheoretischTypischQualität

    With the declared divider scatter the legal mean is set by the average requirement, and only the far tail of the dough-piece distribution would make a loaf with a T2 error, so almost no piece is rejected. A worse divider, a slow divider that lets the dough ferment longer in the hopper, or a large batch raise the scatter: once the scatter exceeds the tolerable error divided by 1.96 the 2.5 % rule for T1 errors sets the mean, the give-away grows linearly with the scatter and rejects start. Crippled and double pieces, and pieces torn by sticking dough, are further technology losses.

  2. TheoretischTypischAusbeute

    The give-away is set by the lot-mean uncertainty and, for large scatter, by the T1 rule; it is product sold above the nominal quantity, a yield loss and not an OEE loss. Rejected pieces are reworked in the next batch and do not reduce the yield, although rework changes the dough and is limited in practice.

5Physikalisch begrenzte OEE

Die höchste OEE, die die Operation erreichen kann: Verfügbarkeit, Leistung und Qualität, begrenzt nur durch unvermeidbare Stillstände und physikalische Prozessfähigkeit.
Anteil der Belegungszeit, der nach jedem unvermeidbaren Verlust verbleibt. Die Achse beginnt bei 0,90.
  • Belegungszeit (ideal)
    1,000
  • Verfügbarkeit
    Faktor 0,958 [0,938–0,978]
    0,958 (−0,042)
  • Leistung
    Faktor 1,00
    0,958 (−0,000)
  • Qualität
    Faktor 1,000000 [0,999923–1,000000]
    0,958 (−0,000)
  • Physikalisch begrenzte OEE
    0,958 [0,938–0,978]

6Vollständige Herleitung

Massen- und Energiebilanzen, geschwindigkeitsbestimmender Schritt, Prozessfähigkeit und unvermeidbare Stillstände, mit Erläuterung jedes Terms.

Scope. Mixed wheat dough is tipped into the hopper of a volumetric divider whose pockets cut pieces of fixed volume; the pieces are rounded, rested and moulded into pans, then proofed and baked into prepackaged loaves of 800 g nominal weight, the loaf of the baking model. This is the operation forming of the bread process. Symbols, values, units, uncertainty distributions and sources are listed in the parameter table generated from config/physics/forming.yaml.

1. Mass balance — dough-piece mass, legal target and maximum yield

What the divider meters. A volumetric divider fills a pocket of volume VV and cuts it off, so the piece mass is m=ρVm = \rho V: it scatters with the fill of the pocket and with the density of the dough. Two contributions are separated.

  • The divider scatter at constant density, σdiv\sigma_{div} (declared 6 g, the same value and range as baking.sigma_divider, so that both models describe the same machine).
  • The density drift. The yeast keeps producing gas while a mixer batch of mass MM waits in the hopper, so the density falls during the dividing time of the batch at a relative rate rρr_\rho (declared 0.1 % per minute). The divider is set for the batch, so the piece mass drifts uniformly from the start to the end of the batch. The dividing time is tb=M/(Nmˉ)t_b = M/(N\bar m), where NN is the number of pieces per minute, and the drift over the batch is mˉ rρ tb=rρM/N\bar m\,r_\rho\,t_b = r_\rho M/N: the target mass cancels, and the drift depends only on the batch size and the divider rate. A uniform drift of that range has the variance (rρM/N)2/12(r_\rho M/N)^2/12.

The scatter of the dough piece and of the loaf it becomes are

σm2=σdiv2+(rρM/N)212,σw=Y σm,\sigma_m^2 = \sigma_{div}^2 + \frac{(r_\rho M/N)^2}{12}, \qquad \sigma_w = Y\,\sigma_m,

where YY is the bake yield, loaf mass per dough mass, linked from the output yield_max of the baking model so that the two models use the same dough and bread moisture. The scatter of the bake loss itself belongs to the baking model and is not counted here.

Legal target. The loaf is a prepackage. Directive 76/211/EEC and OIML R 87 state that the average content must not be less than the nominal quantity QnQ_n, that a lot may contain no more than 2.5 % of packages short by more than the tolerable negative error TT (T1 errors), and that no package may be short by more than 2T2T (T2 errors); for 500 g to 1 000 g, TT = 15 g. Following the filling model, the average requirement is met with a safety factor zμz_\mu = 2.576 on the uncertainty of the lot mean σμ\sigma_\mu (declared 2 g of dough: setting resolution of the pocket volume and density differences between batches), so the smallest legal mean loaf weight is

wˉ=max⁡ ⁣(Qn+zμ Yσμ,  Qn−T+z0.975 σw),z0.975=Φ−1(1−0.025)=1.96,\bar w = \max\!\Big(Q_n + z_\mu\,Y\sigma_\mu,\; Q_n - T + z_{0.975}\,\sigma_w\Big), \qquad z_{0.975} = \Phi^{-1}(1 - 0.025) = 1.96,

and the target dough mass is mˉ=wˉ/Y\bar m = \bar w / Y. With the point values the drift adds 0.87 g to the divider scatter, σm\sigma_m = 6.06 g, σw\sigma_w = 5.48 g, the average requirement binds and wˉ\bar w = 804.65 g, i.e. a dough piece of 890.9 g. The T1 rule takes over when σw\sigma_w exceeds (T+zμYσμ)/1.96(T + z_\mu Y \sigma_\mu)/1.96, about 10 g on the loaf.

Maximum yield. The give-away (wˉ−Qn)/Qn(\bar w - Q_n)/Q_n, 0.58 % with the point values, is product sold above the nominal quantity. As in the filling model it is a yield loss, never an OEE loss:

Ymax=Qnwˉ=0.9942.Y_{max} = \frac{Q_n}{\bar w} = 0.9942 .

Rejected pieces (section 4) are returned to the hopper and reworked into the next batch, so they do not reduce the yield.

2. Energy balance — minimum energy per unit of product

Dividing, rounding and moulding change no chemical bond: the work done on the dough deforms a viscoelastic material and is dissipated as heat or stored for a short time in the stretched gluten network, which relaxes during the rest. In the reversible limit nothing has to be spent, so the thermodynamic minimum is zero, in line with the principle of the US DOE bandwidth study that products without significant chemical reactions have a zero thermodynamic minimum (dough forming is not covered by that study). No open source documents the energy of dividers or moulders, so no best-available or typical energy level is given; the machines' electricity is small compared with mixing and baking.

3. Rate-limiting step

The divider cuts N=npfsN = n_p f_s pieces per minute (npn_p pockets, fsf_s strokes per minute; declared 4 pockets and 25 strokes per minute, 6 000 pieces per hour, about 5.3 t of dough per hour). No physical property of the dough sets a binding limit on the stroke rate in the open sources, so the installed rate is the reference of the performance factor, Pmax=1P_{max} = 1, and the rate outputs carry no ceiling. The rate does enter the physics through the density drift: a faster divider empties the hopper sooner and lowers the scatter (section 1); with the point values a batch of 300 kg is divided in 3.37 min.

4. Process capability — quality ceiling

A check-weigher after the divider removes the pieces that would become a loaf with a T2 error and returns them to the hopper. Their share is the quality loss counted here:

Qmax=1−Φ ⁣(Qn−2T−wˉσw).Q_{max} = 1 - \Phi\!\left(\frac{Q_n - 2T - \bar w}{\sigma_w}\right).

With the declared scatter only the far tail of the distribution is affected and QmaxQ_{max} is practically 1 (rejects of the order of 10−1010^{-10}); the share of loaves with T1 errors is 0.017 %, far below the 2.5 % allowed. A worse divider, a slower divider or a larger batch raise the scatter; once the T1 rule binds, the give-away grows linearly with the scatter and rejects start. In the bread line the T2 reject of the baking model contains the divider scatter together with the bake-loss scatter; when forming and baking are chained the check-weigher reject must be counted once (assumption a4). Crippled and double pieces and pieces torn by sticking dough are technology losses.

5. Unavoidable stops — maximum availability

Dough residues dry and ferment on pockets, knives, rounding tracks and moulding rollers, and the divider oil deteriorates; the equipment is cleaned dry and by hand once per production day (tclt_{cl}, declared 1 h). It is not cleaned in place, so the cleaning model does not apply. Over a production period tpert_{per}:

Amax=1−tcltper=0.958.A_{max} = 1 - \frac{t_{cl}}{t_{per}} = 0.958 .

6. Physics-bounded OEE

Scope of the bound. The theoretical label of OEEmaxOEE_{max} means physics-bounded under the declared scenario: the ceiling follows from the physics of the operation for the declared product, equipment and schedule, and it is a bound only conditional on those declarations. It follows the common definition of all models: AmaxA_{max} counts only stops required by regulation or forced by a physical mechanism, at their physical minimum duration, plus the start-up they force; PmaxP_{max} is the ratio of the physics-limited ideal cycle to the cycle of the capable process; QmaxQ_{max} is the share of conforming units, and mass losses of conforming product are reported only as yield.

OEEmax=Amax×Pmax×Qmax=0.958,Pmax=1.OEE_{max} = A_{max} \times P_{max} \times Q_{max} = 0.958, \qquad P_{max} = 1 .

The ceiling of this operation is set almost entirely by the daily cleaning; the legal weight rules act on the yield (give-away), not on the OEE, as long as the divider is capable. The point values and the Monte Carlo intervals over the declared uncertainty of every input are reported in the output table.

7. Assumptions, validity and use for other processes

See the assumption and validity lists generated from the configuration file. Most inputs of this model are declared scenario values, because no open source documents the weight scatter of dividers or the density change of dough in a hopper; the model shows how these quantities propagate through the legal rules and should be fed with the measured values of a line. The most influential inputs (sensitivity table) are the lot-mean uncertainty for the give-away, the divider scatter, the drift rate and the batch size for the reject share, and the cleaning time for availability.

Use for other processes. The codebook assigns forming to the bread process only. For other doughs and batters sold by weight (rolls, buns, cakes deposited into tins) the same construction applies as an approximation with their own nominal quantity, tolerable error, scatter and density drift; for products sold by count rather than weight the legal target does not apply and only the cleaning term remains.

References

  • Council Directive 76/211/EEC on the making-up by weight or by volume of certain prepackaged products, consolidated text of 11.04.2009.
  • International Organization of Legal Metrology. OIML R 87 Quantity of product in prepackages, Edition 2016.
  • U.S. Department of Energy. Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Food and Beverage Manufacturing, 2017.

7Parameter und Herkunft

Jede Eingangsgröße mit Wert, Einheit, Rolle, Unsicherheitsverteilung und Herkunft. Öffnen Sie ein Zitat, um die Quellenpassage zu lesen, die den Wert belegt.
  • QnQ_n800 g

    Nominal quantity of the prepackaged loaf (same as the baking model)

    Szenario · Fest

    Deklarierte Annahme
  • TT15 g

    Tolerable negative error (tolerable deficiency) for a nominal quantity from 500 g to 1 000 g

    Regulatorisch · Fest

    Verifiziertes Zitat
    Wörtliches Zitat anzeigen
    from 500 to 1 000 — 15 from 1 000 to 10 000 1.5Council Directive 76/211/EEC of 20 January 1976 on the approximation of the laws of the Member States relating to the making-up by weight or by volume of certain prepackaged products (consolidated text 11.04.2009) (öffnet in neuem Tab). Publications Office of the European Union, 2009. S. 5. CELEX 01976L0211-20090411
  • kT2k_{T2}2

    Multiple of the tolerable negative error beyond which no prepackage may be marketed (T2 error)

    Regulatorisch · Fest

    Verifiziertes Zitat
    Wörtliches Zitat anzeigen
    no prepackage having a negative error greater than twice the tolerable negative error given in the table in 2.4 may bear the EEC signCouncil Directive 76/211/EEC of 20 January 1976 on the approximation of the laws of the Member States relating to the making-up by weight or by volume of certain prepackaged products (consolidated text of 11.04.2009) (öffnet in neuem Tab). Publications Office of the European Union, 2009. S. 5. CELEX 01976L0211-20090411
  • pT1p_{T1}2,5 %

    Maximum share of prepackages with a T1 error in a homogeneous group

    Regulatorisch · Fest

    Verifiziertes Zitat
    Wörtliches Zitat anzeigen
    A homogenous group of prepackages shall contain no more than 2.5 % of packages having T1 errors.OIML R 87 Quantity of product in prepackages, Edition 2016 (E) (öffnet in neuem Tab). International Organization of Legal Metrology (OIML), 2016. S. 13. OIML R 87:2016 (E)
  • Δavg\Delta_{avg}0 g

    Average requirement: the mean content may not be below the nominal quantity (offset zero)

    Regulatorisch · Fest

    Verifiziertes Zitat
    Wörtliches Zitat anzeigen
    The average actual quantity of product in prepackages shall be at least equal to the nominal quantity.OIML R 87 Quantity of product in prepackages, Edition 2016 (E) (öffnet in neuem Tab). International Organization of Legal Metrology (OIML), 2016. S. 13. OIML R 87:2016 (E)
  • zμz_{\mu}2,576

    Safety factor on the lot mean so that each lot meets the average requirement (one-sided 99.5 %), as in the filling model

    Szenario · Fest

    Deklarierte Annahme

    Operating choice: Phi^-1(0.995), the same convention as the filling model. A larger factor raises give-away linearly.

  • σμ\sigma_{\mu}2 g

    Standard deviation of the lot mean of the dough-piece mass between weight checks (setting resolution of the pocket volume, density differences between mixer batches)

    Szenario · Gleichverteilt 1 bis 3 g

    Deklarierte Annahme

    Declared assumption; replace with the drift of the controlled mean measured on the line.

  • σdiv\sigma_{div}6 g

    Standard deviation of the dough-piece mass from the divider at constant dough density (same declared value as the baking model)

    Technik · Gleichverteilt 3 bis 10 g

    Deklarierte Annahme

    Capability assumption, identical to baking.sigma_divider so that the two models describe the same divider; replace with the divider's measured weight distribution.

  • rρr_\rho0,001 1/min

    Relative decrease of the dough density per minute in the hopper (gas production by the yeast)

    Szenario · Gleichverteilt 0,0005 bis 0,002 1/min

    Deklarierte Annahme

    No open source with the density change of dough in a divider hopper was found. Declared assumption (0.05-0.2 % per minute, i.e. 1-4 % over 20 minutes); it depends on yeast level, dough temperature and the degassing by the divider ram.

  • MM300 kg

    Dough mass of one mixer batch divided from the hopper

    Szenario · Gleichverteilt 150 bis 450 kg

    Deklarierte Annahme
  • npn_p4

    Number of pockets of the divider

    Szenario · Fest

    Deklarierte Annahme
  • fsf_s25 1/min

    Strokes per minute of the divider

    Szenario · Gleichverteilt 15 bis 35 1/min

    Deklarierte Annahme

    Installed rate of the divider; no open source with a physical limit of the stroke rate was found.

  • YY0,903226

    Bake yield, loaf mass per dough mass (output yield_max of the baking model)

    Stoffwert · Dreiecksverteilt 0,856255, 0,903226, 0,952311

    Berechnet

    Output `yield_max` of the baking model: 0.9032 dimensionless [0.8563, 0.9523].

  • tclt_{cl}1 h

    Daily cleaning of divider, rounder and moulder (dough residues, divider oil)

    Szenario · Gleichverteilt 0,5 bis 1,5 h

    Deklarierte Annahme

    Dry and manual cleaning; the cleaning model (recirculated circuits) does not apply. Declared duration.

  • tpert_{per}24 h

    Production period of the availability balance (one production day)

    Szenario · Fest

    Deklarierte Annahme

8Vergleichswerte

Dokumentierte Werte aus offenen Quellen zur Prüfung der Obergrenzen; kein dokumentierter Wert darf die theoretische Grenze übertreffen.
VergleichswertObergrenzeWertHerkunft
DOE bandwidth study: products without significant chemical reactions have a zero thermodynamic minimum (dough forming is not covered by the study; the principle applies)
Wörtliches Zitat anzeigen
Most food and beverage products have a zero TM energy intensity because there are no significant chemical reactions involved.Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Food and Beverage Manufacturing (öffnet in neuem Tab). U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office, 2017. S. 25. DOE/EE-1571; OSTI ID 1512366
Theoretisch0 kJ/kgVerifiziertes Zitat

9Unvermeidbare Stillstände

Stillstände, die Physik oder Regulierung erzwingen; sie bestimmen die maximale Verfügbarkeit.
  • Daily cleaning of divider, rounder and moulderDeklarierte Annahme

    Dough residues dry and ferment on pockets, knives, rounding tracks and moulding rollers, and the divider oil deteriorates; the equipment is cleaned dry and by hand once per production day.

10Annahmen

  1. The loaf weight is the dough-piece mass times the bake yield of the baking model; the scatter of the bake loss is counted in the baking model, not here. Within a batch the dough density falls linearly with time, so the piece mass drifts uniformly between the start and the end of the batch.
  2. The legal target follows the filling model: the mean must satisfy the average requirement with a safety factor on the lot-mean uncertainty and leave at most 2.5 % of loaves with T1 errors; dough pieces whose loaf would have a T2 error are removed at the check-weigher and reworked, and they count as quality losses; the give-away is reported as yield.
  3. No physical limit of the dough binds the rate: the stroke rate of the installed divider sets it, so P_max = 1 and the rate outputs carry no ceiling. Availability counts only the daily dry cleaning at a declared duration; the cleaning model does not apply.
  4. In the bread line the T2 reject of the baking model already contains the divider scatter together with the bake-loss scatter; when forming and baking are chained the check-weigher reject must be counted once. With the declared values both shares are below one in ten thousand.

11Gültigkeitsbereich

  • Volumetric dividers for wheat bread doughs sold as prepackaged loaves of 500 g to 1 000 g.
  • Approximation for depositing and moulding of other doughs and batters sold by weight, with their own scatter and density drift.

12Sensitivität

Elastizität: relative Änderung der Ergebnisgröße bei relativer Änderung jedes Parameters. Daneben steht die Spearman-Rangkorrelation aus den Monte-Carlo-Ziehungen.
  • tpert_{per}Production period of the availability balance (one production day)
    Elastizität +0,044Spearman-ρ —
  • tclt_{cl}Daily cleaning of divider, rounder and moulder (dough residues, divider oil)
    Elastizität -0,043Spearman-ρ -1,00
  • σdiv\sigma_{div}Standard deviation of the dough-piece mass from the divider at constant dough density (same declared value as the baking model)
    Elastizität 0,000Spearman-ρ -0,02
  • TTTolerable negative error (tolerable deficiency) for a nominal quantity from 500 g to 1 000 g
    Elastizität 0,000Spearman-ρ —
  • kT2k_{T2}Multiple of the tolerable negative error beyond which no prepackage may be marketed (T2 error)
    Elastizität 0,000Spearman-ρ —
  • YYBake yield, loaf mass per dough mass (output yield_max of the baking model)
    Elastizität 0,000Spearman-ρ 0,00
  • Größe steigt mit dem Parameter
  • Größe sinkt mit dem Parameter

13Validierungsprüfungen

Ein Modell wird nur veröffentlicht, wenn alle Prüfungen bestanden sind.
  • Dimensionsanalyse17 outputs converted to their declared unitsBestanden
  • Jeder zitierte Wert an seiner Quelle verifiziert5 verified, 0 failedBestanden
  • Kein dokumentierter Wert übertrifft die theoretische GrenzeBestanden
  • Obergrenzen in physikalischer ReihenfolgeBestanden
  • Anteile zwischen 0 und 1Bestanden

14Verlustursachen in dieser Operation

Wahrscheinlichkeit, dass jede Ursache als relevanter Verlust einer Linie dokumentiert ist, gepoolt über alle Segmente.

15Literatur

  1. Council Directive 76/211/EEC of 20 January 1976 on the approximation of the laws of the Member States relating to the making-up by weight or by volume of certain prepackaged products (consolidated text 11.04.2009) (öffnet in neuem Tab). Publications Office of the European Union, 2009. S. 5. CELEX 01976L0211-20090411
  2. Council Directive 76/211/EEC of 20 January 1976 on the approximation of the laws of the Member States relating to the making-up by weight or by volume of certain prepackaged products (consolidated text of 11.04.2009) (öffnet in neuem Tab). Publications Office of the European Union, 2009. S. 5. CELEX 01976L0211-20090411
  3. OIML R 87 Quantity of product in prepackages, Edition 2016 (E) (öffnet in neuem Tab). International Organization of Legal Metrology (OIML), 2016. S. 13. OIML R 87:2016 (E)
  4. Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Food and Beverage Manufacturing (öffnet in neuem Tab). U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office, 2017. S. 25. DOE/EE-1571; OSTI ID 1512366

Prozesse mit dieser Operation