Incorrect label application
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 48 % der Verlustzeit der Linie. Berichtet von 1 der 85 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The labeling station applies a label that is wrong, misaligned, skewed, missing required information, or not matched to the product/format running, due to incorrect label stock loaded, misregistration of the applicator, print-and-apply errors, or sensor mismatch between product and label data.
Was man dagegen tut
Verify and lock label stock and print data against the active recipe before run start, use automated vision or barcode verification with reject-and-divert logic at the labeler, and enforce changeover checklists that confirm label artwork matches product format.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,7 % [0,1–1,9 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–0,9 %]
- Anteil an der Verlustzeit bei Auftreten
- 48 % [36–59 %]
- Studien / Einheiten
- 85 / 113
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,7 % [0,1–2,8 %]11 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,6 % [0,1–2,2 %]29 Studien
- Bier, Wein und Spirituosen0,7 % [0,1–2,7 %]13 Studien
- Backwaren und Teigwaren0,8 % [0,1–3,1 %]1 Studie
- Fleisch, Geflügel und Fisch0,8 % [0,1–2,8 %]4 Studien
- Obst- und Gemüseverarbeitung0,8 % [0,1–3,0 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,8 % [0,1–2,8 %]3 Studien
- Zucker und Süßwaren0,8 % [0,1–3,1 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,8 % [0,1–2,7 %]4 Studien
- Futtermittel und Heimtiernahrung0,8 % [0,1–2,9 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)1,1 % [0,1–4,0 %]9 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe labeling station applies a label that is wrong, misaligned, skewed, missing required information, or not matched to the product/format running, due to incorrect label stock loaded, misregistration of the applicator, print-and-apply errors, or sensor mismatch between product and label data.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseMES/vision inspection logs show label-verification rejects or mismatched barcode/text reads at the labeler, often with no stoppage recorded, only an increase in reject counter and downgrade or rework flags on affected units. Print-and-apply controllers may log print-quality or registration faults correlated with the reject spike.
Gegenmaßnahme
Ingenieurpraktische HinweiseVerify and lock label stock and print data against the active recipe before run start, use automated vision or barcode verification with reject-and-divert logic at the labeler, and enforce changeover checklists that confirm label artwork matches product format.
4Quellen
- Proposal for improving production efficiency in a food sector company, using SMED, Planned Maintenance and Poka-Yoke (2026)Quelle öffnenAnteil an der Verlustzeit: 14,5 % · laut Bericht: “incorrect labeling”
Wörtliches Zitat anzeigen
Esta situación fue originada por cuatro causas raíz: averías en equipos (35.41%), elevados tiempos de setup (17.38%), producto final golpeado (32.69%) y etiquetado incorrecto (14.52%)

