Ingredient dosing station failure or jam
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 31 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
Dosing equipment that meters bulk ingredients such as meals, grains or oils into the batching or mixing process fails or jams because of mechanical wear, auger or valve blockage, material bridging or sticking, or weighing cell drift. The fault can appear at any of the multiple dosing entry points feeding a common mixer, each handling a different ingredient stream.
Was man dagegen tut
Apply preventive maintenance to augers, valves, agitators and weighing cells, install anti-bridging or anti-caking devices and vibrators on hoppers prone to sticking, and use blockage or no-flow sensors to trigger early alarms before a full stop. Standardize quick-clear procedures and spare parts for each dosing entry to minimize intervention time.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 1,0 % [0,2–3,1 %]
- Erwarteter Anteil an der Verlustzeit
- 0,6 % [0,1–1,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [46–67 %]
- Studien / Einheiten
- 31 / 40
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte1,1 % [0,1–4,2 %]6 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,2 % [0,1–4,5 %]2 Studien
- Bier, Wein und Spirituosen1,2 % [0,1–4,7 %]0 Studien
- Backwaren und Teigwaren1,1 % [0,1–4,2 %]2 Studien
- Fleisch, Geflügel und Fisch1,2 % [0,1–4,9 %]1 Studie
- Obst- und Gemüseverarbeitung1,2 % [0,1–4,5 %]2 Studien
- Getreide- und Ölsaatenmüllerei1,2 % [0,1–5,2 %]0 Studien
- Zucker und Süßwaren1,2 % [0,1–4,5 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel1,1 % [0,1–4,5 %]3 Studien
- Futtermittel und Heimtiernahrung1,7 % [0,2–6,0 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)1,1 % [0,1–4,4 %]7 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseDosing equipment that meters bulk ingredients such as meals, grains or oils into the batching or mixing process fails or jams because of mechanical wear, auger or valve blockage, material bridging or sticking, or weighing cell drift. The fault can appear at any of the multiple dosing entry points feeding a common mixer, each handling a different ingredient stream.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA shows a dosing-point alarm or fault state, a stalled or frozen weight signal on the load cell associated with that entry, abnormal motor current (spike then trip or sustained overload) on the feeder drive, and the downstream mixer cycle held in wait-for-ingredient state. Repeated short stop counters cluster on specific dosing entries rather than on the mixer itself.
Gegenmaßnahme
Ingenieurpraktische HinweiseApply preventive maintenance to augers, valves, agitators and weighing cells, install anti-bridging or anti-caking devices and vibrators on hoppers prone to sticking, and use blockage or no-flow sensors to trigger early alarms before a full stop. Standardize quick-clear procedures and spare parts for each dosing entry to minimize intervention time.
4Quellen
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,109 Kg.h-1 · laut Bericht: “Dosing (oils)”
Wörtliches Zitat anzeigen
9Dosing 8.35 0.013 ± 0.003 0.109 ± 0.025 Kg 1.36
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,549 Kg.h-1 · laut Bericht: “Dosing (animal meals, first entry)”
Wörtliches Zitat anzeigen
4Dosing 8.35 0.066 ± 0.022 0.549 ± 0.184 Kg 6.85
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,314 Kg.h-1 · laut Bericht: “Dosing (animal meals, second entry)”
Wörtliches Zitat anzeigen
4Dosing 8.35 0.038 ± 0.010 0.314 ± 0.084 Kg 3.92
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,498 Kg.h-1 · laut Bericht: “Dosing (animal meals, third entry)”
Wörtliches Zitat anzeigen
4Dosing 8.35 0.060 ± 0.025 0.498 ± 0.219 Kg 6.22
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 1,24 Kg.h-1 · laut Bericht: “Dosing (vegetal meals)”
Wörtliches Zitat anzeigen
2Dosing 8.35 0.148 ± 0.050 1.240 ± 0.428 Kg 15.48
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,888 Kg.h-1 · laut Bericht: “Dosing (corn)”
Wörtliches Zitat anzeigen
3Dosing 8.35 0.106 ± 0.034 0.888 ± 0.284 Kg 11.08
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,146 Kg.h-1 · laut Bericht: “Dosing (oils, second entry)”
Wörtliches Zitat anzeigen
2Dosing 8.35 0.017 ± 0.005 0.146 ± 0.042 Kg 1.82
- IMPACT OF FACILITY MAINTENANCE SYSTEM ON PRODUCT PHYSICAL LOSSES IN A POULTRY FEED MILL UNIT (2011)Quelle öffnenVerlustzeit: 0,176 Kg.h-1 · laut Bericht: “Dosing (animal meals, fourth entry)”
Wörtliches Zitat anzeigen
4Dosing 8.35 0.021 ± 0.007 0.176 ± 0.058 Kg 2.19
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenVerlustzeit: 9,00 h · laut Bericht: “Dosing table jam”
Wörtliches Zitat anzeigen
Atasco mesa dosificado 9,00 57%

