foratvise
Loslegen
not classifiable

Transportation time between stations

not classifiableFördern und Puffern

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 59 % der Verlustzeit der Linie. Berichtet von 1 der 86 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Product or containers require a finite travel time on conveyors or transfer paths between successive stations of the line, and this transit interval is counted as line time even though no processing occurs. The loss appears when conveyor layout, distance, or accumulation buffers make this transport interval long relative to the processing cycle, effectively idling downstream equipment while material is in transit.

Was man dagegen tut

Redesign conveyor layout to shorten transport paths and align conveyor speeds with upstream and downstream cycle times, adding buffering or accumulation sections where needed to decouple transit time from processing rate. Line balancing studies and relocation of equipment to reduce travel distance are the typical engineering response.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,7 % [0,1–1,9 %]
Erwarteter Anteil an der Verlustzeit
0,4 % [0,1–1,2 %]
Anteil an der Verlustzeit bei Auftreten
59 % [49–71 %]
Studien / Einheiten
86 / 112
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,7 % [0,1–2,6 %]11 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,6 % [0,1–2,3 %]28 Studien
  • Bier, Wein und Spirituosen
    0,7 % [0,1–2,5 %]12 Studien
  • Backwaren und Teigwaren
    0,8 % [0,1–3,0 %]0 Studien
  • Fleisch, Geflügel und Fisch
    1,1 % [0,1–4,4 %]5 Studien
  • Obst- und Gemüseverarbeitung
    0,8 % [0,1–3,0 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,8 % [0,1–3,1 %]4 Studien
  • Zucker und Süßwaren
    0,8 % [0,1–3,1 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,8 % [0,1–3,0 %]4 Studien
  • Futtermittel und Heimtiernahrung
    0,8 % [0,1–3,0 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,8 % [0,1–2,9 %]9 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Product or containers require a finite travel time on conveyors or transfer paths between successive stations of the line, and this transit interval is counted as line time even though no processing occurs. The loss appears when conveyor layout, distance, or accumulation buffers make this transport interval long relative to the processing cycle, effectively idling downstream equipment while material is in transit.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

Logs show a distinct conveying or transit machine-state with a duration that does not correspond to any processing alarm, often paired with downstream starvation (waiting-for-material) states and upstream blocking states. No fault code is raised, and the pattern recurs cyclically with the line's material flow rather than as discrete stoppage events.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Redesign conveyor layout to shorten transport paths and align conveyor speeds with upstream and downstream cycle times, adding buffering or accumulation sections where needed to decouple transit time from processing rate. Line balancing studies and relocation of equipment to reduce travel distance are the typical engineering response.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 10,0 min · laut Bericht: “Transportation time”
    Wörtliches Zitat anzeigen
    For the automated line, a reduction from 10 to 5 min was achieved which represents improvement by 50% in the transportation time.