Eingeschlossene Studie
Using Lean Manufacturing Approach for Improvement in Food Manufacturing: Case Study from Egypt
1Bibliografische Angaben
- Autoren
- Noha A. Mostafa, Karim Ahmed
- Jahr
- 2024
- Publikationsorgan
- International Conference on Industrial Engineering and Operations Management (IEOM)
- Land
- Egypt
- Segment
- Fleisch, Geflügel und Fisch
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · — Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
The processed meat production line was selected for the study as it has the largest market share.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 7Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
Install new plastic packagesfiller machineWörtliches Zitat anzeigen (Table 1)Install new plastic packages 2 min 17 min Internal | Rüsten und Einstellen | Verlustzeit | 2,00 min | Beide Extraktionen übereinstimmend |
Transport die to the machinefiller machineWörtliches Zitat anzeigen (Table 1)Transport die to the machine 2 min 4 min External | Rüsten und Einstellen | Verlustzeit | 2,00 min | Beide Extraktionen übereinstimmend |
Check on first piecefiller machineWörtliches Zitat anzeigen (Table 1)Check on first piece 0.5 min 17.5 min External | Rüsten und Einstellen | Verlustzeit | 0,500 min | Beide Extraktionen übereinstimmend |
Program the machinefiller machineWörtliches Zitat anzeigen (Table 1)Program the machine 5 min 15 min Internal | Rüsten und Einstellen | Verlustzeit | 5,00 min | Beide Extraktionen übereinstimmend |
Change machine diefiller machineWörtliches Zitat anzeigen (Table 1)Change machine die 6 min 10 min Internal | Rüsten und Einstellen | Verlustzeit | 6,00 min | Beide Extraktionen übereinstimmend |
Search for new diefiller machineWörtliches Zitat anzeigen (Table 1)Search for new die 2 min 2 min External | Rüsten und Einstellen | Verlustzeit | 2,00 min | Beide Extraktionen übereinstimmend |
Documentationfiller machineWörtliches Zitat anzeigen (Table 1)Documentation 0.5 min 18 min External | Rüsten und Einstellen | Verlustzeit | 0,500 min | Beide Extraktionen übereinstimmend |
Total waiting timeWörtliches Zitat anzeigen (Section 4.1)The total processing time was 1619 minutes, the total waiting time was 53 minutes, and the total lead time was 1672 minutes. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 53,0 min | Beide Extraktionen übereinstimmend |
Total time of setupfiller machineWörtliches Zitat anzeigen (Table 3)Initial 18 11 | Rüsten und Einstellen | Verlustzeit | 18,0 min | Einfache Extraktion |
Internal tasks timefiller machineWörtliches Zitat anzeigen (Table 3)Initial 18 11 | Rüsten und Einstellen | Verlustzeit | 11,0 min | Einfache Extraktion |
Change machine diefiller machineWörtliches Zitat anzeigen (Section 4.2.1)The total changeover time is 18 min and changing the die takes almost 33% of this time while programming the machine takes 27%. | Rüsten und Einstellen | Anteil an der Verlustzeit | 33,0 % | Einfache Extraktion |
Program the machinefiller machineWörtliches Zitat anzeigen (Section 4.2.1)The total changeover time is 18 min and changing the die takes almost 33% of this time while programming the machine takes 27%. | Rüsten und Einstellen | Anteil an der Verlustzeit | 27,0 % | Einfache Extraktion |
Transportation timeWörtliches Zitat anzeigen (Abstract)For the automated line, a reduction from 10 to 5 min was achieved which represents improvement by 50% in the transportation time. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 10,0 min | Einfache Extraktion |
Unpacking cycle timeWörtliches Zitat anzeigen (Section 4.3)This led to reduce the unpacking cycle time to 8 min instead of 12 min. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 12,0 min | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Page 7, Section 4.2.1)The total changeover time is 18 min and changing the die takes almost 33% of this time while programming the machine takes 27%. | Rüsten und Einstellen | Verlustzeit | 18,0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.1 Current state VSM, Page 5)the total lead time was 1672 minutes | none | Durchsatz | 1.672 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.1 Current state VSM, Page 5)The total processing time was 1619 minutes | none | Durchsatz | 1.619 min | Einfache Extraktion |
—unpackingWörtliches Zitat anzeigen (Section 4.3 Mapping Future State, Page 10)This led to reducing the unpacking cycle time to 8 min instead of 12 min. | none | Durchsatz | 12,0 min | Einfache Extraktion |
—automated conveyor transportWörtliches Zitat anzeigen (Abstract, Page 1)For the automated line, a reduction from 10 to 5 min was achieved which represents improvement by 50% in the transportation time. | none | Durchsatz | 10,0 min | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Abstract, Page 1)After applying Single Minute Exchange of die, it was found that changeover time was reduced from 18 to 11 min | Rüsten und Einstellen | Verlustzeit | 11,0 min | Einfache Extraktion |
Search for new diefilling machineWörtliches Zitat anzeigen (Table 2, Page 8)Search for new die | 2 min | 2 min | External | Rüsten und Einstellen | Verlustzeit | 2,00 min | Einfache Extraktion |
Transport die to the machinefilling machineWörtliches Zitat anzeigen (Table 2, Page 8)Transport die to the machine | 2 min | 4 min | External | Rüsten und Einstellen | Verlustzeit | 2,00 min | Einfache Extraktion |
Change machine diefilling machineWörtliches Zitat anzeigen (Table 2, Page 8)Change machine die | 2 min | 6 min | Internal | Rüsten und Einstellen | Verlustzeit | 2,00 min | Einfache Extraktion |
Programming machinefilling machineWörtliches Zitat anzeigen (Table 2, Page 8)Programming machine | 1 min | 8 min | Internal | Rüsten und Einstellen | Verlustzeit | 1,00 min | Einfache Extraktion |
Install new plastic packagesfilling machineWörtliches Zitat anzeigen (Table 2, Page 8)Install new plastic packages | 2 min | 10 min | Internal | Rüsten und Einstellen | Verlustzeit | 2,00 min | Einfache Extraktion |
Check on first piecefilling machineWörtliches Zitat anzeigen (Table 2, Page 8)Check on first piece | 0.5 min | 10.5 min | External | Rüsten und Einstellen | Verlustzeit | 0,500 min | Einfache Extraktion |
Documentation papersfilling machineWörtliches Zitat anzeigen (Table 2, Page 8)Documentation papers | 0.5 min | 11 min | External | Rüsten und Einstellen | Verlustzeit | 0,500 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.3 Mapping Future State, Page 10)The new total processing time is 1615 minutes, the new total waiting time is 48 minutes, and the new total lead time was 1663 minutes. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 48,0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.3 Mapping Future State, Page 10)the new total lead time was 1663 minutes | none | Durchsatz | 1.663 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.3 Mapping Future State, Page 10)The new total processing time is 1615 minutes | none | Durchsatz | 1.615 min | Einfache Extraktion |
—unpackingWörtliches Zitat anzeigen (Section 4.3 Mapping Future State, Page 10)This led to reducing the unpacking cycle time to 8 min instead of 12 min. | none | Durchsatz | 8,00 min | Einfache Extraktion |
—automated conveyor transportWörtliches Zitat anzeigen (Abstract, Page 1)For the automated line, a reduction from 10 to 5 min was achieved which represents improvement by 50% in the transportation time. | none | Durchsatz | 5,00 min | Einfache Extraktion |
Beobachtungseinheiten
- Filler machine · Abfüllen · Ausgangslage
- Processed meat production line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Automated material handling line · Fördern und Puffern · Ausgangslage
- Raw meat unpacking area · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Processed meat production line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention

